Advantages of the Condylator
Content
Gerber-Condylator
The Advantages of the Gerber-Condylator-System
Intraoral Registration
Registration of a physiologic and reliable
centric relation. By using the intraoral
bearing pin according to McCrane,
occlusal interferences are not influencing
the cranio-mandibular relationship, which
may lead to occlusal errors.
Internal derangements such as retruded
condyle position can easily be corrected
during registration (see literature).
Extraoral Registration
A dynamic pantograph-like face bow is
used to trace the sagittal condylar path.
The inclination of the protrusive condylar
path is measured and transferred to the
articulator. (The Gerber Condylator being
ideally suitable for this). Any irregularities
in the path can be visualised and taken
into consideration when determining condylar guidance.
The Resilience Test
The resiliency test is part of the diagnosis
in cases of cranio-mandibular disorders. It
is used for investigating the resilience of
the discus articularis. It enables you to
plan any possible corrections that might
be necessary through the dental occlusion. The repositioning of the natural
joints is possible with the Condylator
VARIO.
Gerber-Condylator = Joint Protective Occlusion
Bellariastrasse 48
CH-8038 Zürich
Tel +41 44 481 83 42
Fax +41 44 482 17 85
Sales
Export
Courses
Literature
Gerber-Condylator
The Advantages of the Gerber-Condylator-System
Natural Form and Movement
The condyle axis has the shape of a double cone.
During lateral movements this provides the most
common form of 3D Bennett movement. An optimum combination of side shift movements on the
non-working side result in Bennett and Fischer
angle. With this type of integrated movement in
the Condylator joints, a tolerant occlusion with an
improved freedom in centric is achieved.
Immediate-Side-Shift and Bennett-Shift (ISS)
If tooth contact during chewing occurs only between the molars on the balancing side, hyperbalance can occur. Hyperbalance (= tooth contact
during chewing movements between the molars)
occurs when the balancing facets become too
steep relative to the working facets. As a consequence, increased tooth mobility, TMJ pain and
muscle spasm result. The Condylator avoids too
steep balancing contacts. It’s the first articulator
with transversal lateral movement (ISS).
Lifelike Retrusive Movement
The simulation of the retrusive movement according to the natural jaw movement is backwards and
downwards, as in swallowing (see illustration).
Controlled Movement Capacity
The physiological limitations of the range of movements according to the natural “envelope of
movements of the stomatognathic system.
Variable Vertical Dimension in the Joint Area
Variable vertical dimension in the artificial TMJ for
the enlargement of the restricted articular spaces.
The Condylator VARIO has been specially developed for this purpose and it can be infinitely adjusted vertically from 0.0mm to 1.2mm (see also
the resilience test).
Gerber-Condylator = Joint Protective Occlusion
Bellariastrasse 48
CH-8038 Zürich
Tel +41 44 481 83 42
Fax +41 44 482 17 85
Sales
Export
Courses
Literature
The Advantages of the Gerber-Condylator-System
Intraoral Registration
Registration of a physiologic and reliable
centric relation. By using the intraoral
bearing pin according to McCrane,
occlusal interferences are not influencing
the cranio-mandibular relationship, which
may lead to occlusal errors.
Internal derangements such as retruded
condyle position can easily be corrected
during registration (see literature).
Extraoral Registration
A dynamic pantograph-like face bow is
used to trace the sagittal condylar path.
The inclination of the protrusive condylar
path is measured and transferred to the
articulator. (The Gerber Condylator being
ideally suitable for this). Any irregularities
in the path can be visualised and taken
into consideration when determining condylar guidance.
The Resilience Test
The resiliency test is part of the diagnosis
in cases of cranio-mandibular disorders. It
is used for investigating the resilience of
the discus articularis. It enables you to
plan any possible corrections that might
be necessary through the dental occlusion. The repositioning of the natural
joints is possible with the Condylator
VARIO.
Gerber-Condylator = Joint Protective Occlusion
Bellariastrasse 48
CH-8038 Zürich
Tel +41 44 481 83 42
Fax +41 44 482 17 85
Sales
Export
Courses
Literature
Gerber-Condylator
The Advantages of the Gerber-Condylator-System
Natural Form and Movement
The condyle axis has the shape of a double cone.
During lateral movements this provides the most
common form of 3D Bennett movement. An optimum combination of side shift movements on the
non-working side result in Bennett and Fischer
angle. With this type of integrated movement in
the Condylator joints, a tolerant occlusion with an
improved freedom in centric is achieved.
Immediate-Side-Shift and Bennett-Shift (ISS)
If tooth contact during chewing occurs only between the molars on the balancing side, hyperbalance can occur. Hyperbalance (= tooth contact
during chewing movements between the molars)
occurs when the balancing facets become too
steep relative to the working facets. As a consequence, increased tooth mobility, TMJ pain and
muscle spasm result. The Condylator avoids too
steep balancing contacts. It’s the first articulator
with transversal lateral movement (ISS).
Lifelike Retrusive Movement
The simulation of the retrusive movement according to the natural jaw movement is backwards and
downwards, as in swallowing (see illustration).
Controlled Movement Capacity
The physiological limitations of the range of movements according to the natural “envelope of
movements of the stomatognathic system.
Variable Vertical Dimension in the Joint Area
Variable vertical dimension in the artificial TMJ for
the enlargement of the restricted articular spaces.
The Condylator VARIO has been specially developed for this purpose and it can be infinitely adjusted vertically from 0.0mm to 1.2mm (see also
the resilience test).
Gerber-Condylator = Joint Protective Occlusion
Bellariastrasse 48
CH-8038 Zürich
Tel +41 44 481 83 42
Fax +41 44 482 17 85
Sales
Export
Courses
Literature
