Agilent Handheld Test Tools
Content
Agilent Handheld Test Tools
High quality, reliable equipment for electronics, electrical and industrial process testing
Agilent Technologies is the world’s premier measurement company and a technology leader in communications, electronics, life sciences and chemical analysis. Recognizing the increasing demand for tools that are portable, accurate and yet affordable, Agilent offers handheld instruments which include digital multimeters, oscilloscopes, clamp meters, capacitance and LCR meters and multi-function calibrator/meter for installation and maintenance activities. NEW
These award-winning handheld tools meet critical safety standards while providing a wealth of features and world-class accuracy. Each handheld comes in vivid orange cases that provide greater visibility and serves to emphasize investment protection through feature sets that go beyond those of typical handhelds.
Handle big currents - safely with NEW handheld clamp meters from Agilent
Key features:
Large clamp opening of 52 mm or 2” High measurement capability of up to 1000 A for AC, DC or AC+DC CAT III 1000 V/CAT IV 600 V safety rating Includes full-featured DMM with resistance, capacitance, frequency and temperature functions High resolution measurements - measure current as low as 0.01 A Peak hold capability
Measurements of electrical distribution cables can be challenging and risky. For cables up to two inches in diameter, the Agilent U1210 Series handheld clamp meters enable high-current measurements without breaking the circuit. Unlike most clamp meters, they also include DMM capabilities—resistance, capacitance, frequency and temperature—to simplify troubleshooting during installation and maintenance. Best of all, they provide an extra layer of protection with CAT IV 600V and CAT III 1000 V safety ratings.
Electronics, Electrical, Installation & Maintenance
Imagine razor-sharp readings with the U1253A/U1253B OLED handheld DMM
MORE HANDHELD DIGITAL MULTIMETERS
Be well equipped from the start
with Agilent U1250 Series digital multimeters
The process of isolating faults is always unpredictable—so it’s good to be equipped with a versatile DMM that simplifies analysis, accelerates glitch detection and makes it easier to probe hard-to-reach points. Optimize electronics troubleshooting with the accuracy, capabilities, and accessories you need to get started in no time.
Features
High contrast ratio of 2000:1 and wide viewing angle of 160° (For U1253A/U1253B) 50,000 counts high resolution and up to 0.025% low error rate Built-in square-wave generator and frequency counter Includes additional 4-mm tip probes and Certification of Calibration Data logging to instrument and PC
A testament to innovation and credibility, 2006
Best Value Portable Test Equipment, 2006
General-purpose instruments category, 2009
Category Winner, EC&M Product of the Year competition, 2009
Check more, fix more, spend less
with Agilent U1240 Series digital multimeters
Installation and maintenance of machinery, electrical systems and more often require numerous quick checks and fixes, sometimes under hazardous conditions. Whether you need to quickly inspect power supplies for harmonics, detect glitches in switch systems or monitor differential temperature, the U1240 Series of handheld digital multimeters (DMMs) is up to the task. With all you need in one portable instrument, you can travel light and finish the day’s work with ease. Plus, you’ll be glad to know it’s easy to own one, even with the DMM’s rich capabilities.
Features
Low micro-amp and high Mega-ohm ranges Switch/Relay counter for glitch detection Harmonic ratio measurement in AC supplies Dual and differential temperature measurements Data logging to instrument on the go Includes additional 4-mm tip probes and Certification of Calibration
2
Electronics, Electrical, Installation & Maintenance
HANDHELD DIGITAL OSCILLOSCOPES
Make high performance measurements on the go
with Agilent U1600 Series digital oscilloscopes
A scope with a color waveform display. A DMM for basic measurements. A data logger to record DMM readings to a PC. All three capabilities are in one instrument—the U1600 Series of handheld digital oscilloscopes. Designed to address the portability needs of various installation and maintenance applications, these scopes enable clear waveform viewing, easy waveform analysis and quick isolation of signal glitches. With high-performance features loaded into one robust package, mobile troubleshooting is a breeze.
Features
Built-in DMM and data logger Large 4.5-inch color display 200 MSa/s high sampling rate and deep memory Built-in Quick Help, available in multiple languages Data logging to instrument and PC Convenient data download to USB flash drive*
*with Option 001
No. 1 Product of the Year as voted by readers—2006
Electronics
HANDHELD CAPACITANCE & LCR METERS
Test passive components conveniently, affordably and reliably
with the Agilent U1700 Series capacitance/LCR meters — extending the tradition of industry-leading benchtop units
Sharing a bench LCR meter is practical, but isn’t always convenient. With Agilent’s new line of handheld capacitance and LCR meters, you can perform quick, basic LCR measurements at your convenience. Better yet, our handheld models extend the tradition of our industry-leading benchtop units to a lower price point. Now, everyone on your team can be equipped for passive-component testing—on the bench or on the go—without the wait.
Features
Up to 20,000 counts resolution with dual display Wide capacitance measurement up to 199.99 mF* Wide LCR range with up to 4 test frequencies** Auto-calculation of phase angle, D and Q factors** Compare mode with 25 High/Low limit settings* Relative and Tolerance modes
*with U1701A/U1701B **with handheld LCR meters (phase angle calculation only with U1732A/U1732B)
3
Industrial Processes
Calibrate process control parts easily with using just one tool
with the Agilent U1401A/U1401B multi-function calibrator/meter
More often than not, the calibration of process control parts requires simultaneous measurements with a DMM. Carry two tools in one—and calibrate while you measure—with the Agilent U1401A/U1401B handheld multi-function calibrator/meter. Now you can travel light, whether you’re doing calibration for validation, troubleshooting, or service and maintenance. Slip the robust U1401A/U1401B in its sturdy carrying case and you’re ready to go.
Features
50,000-count resolution on dual display Simultaneous source and measure capabilities Bipolar voltage and current, square-wave, auto scan and ramp outputs Full-span DMM measurement and recording functions Built-in charging capability
Model no. U1211A U1212A U1213A U1241A/U1241B U1242A/U1242B U1251A/U1251B U1252A/U1252B U1253A/U1253B U1253A-001 U1401A/U1401B U1602A/U1602B U1604A/U1604B U1701A/U1701B U1731A/U1731B U1732A/U1732B
Description True-rms 1000 A Handheld Clamp Meter True-rms 1000 A Handheld Clamp Meter True-rms 1000 A Handheld Clamp Meter True-rms 10,000 Count Handheld DMM True-rms 10,000 Count Handheld DMM with Datalogging 50,000 Count Handheld DMM 50,000 Count Handheld DMM with Freq Counter, Logic Output and Data Logging 50,000 Count Handheld DMM with OLED Display Includes soft carrying case, SMT grabbers and fine-tip test probes Handheld Multi-Function Calibrator or Meter 20 MHz Handheld Digital Oscilloscope 40 MHz Handheld Digital Oscilloscope 11,000 Count Dual Display Handheld Capacitance Meter 20,000 Count Dual Display Handheld LCR Meter, 120 Hz/1 kHz 20,000 Count Dual Display Handheld LCR Meter, 100 Hz/120 Hz/1 kHz/10 kHz For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2010 Printed in USA, May 26, 2010 5990-5316EN
A wide range of accessories is available.
www.agilent.com/find/handheld-tools
High quality, reliable equipment for electronics, electrical and industrial process testing
Agilent Technologies is the world’s premier measurement company and a technology leader in communications, electronics, life sciences and chemical analysis. Recognizing the increasing demand for tools that are portable, accurate and yet affordable, Agilent offers handheld instruments which include digital multimeters, oscilloscopes, clamp meters, capacitance and LCR meters and multi-function calibrator/meter for installation and maintenance activities. NEW
These award-winning handheld tools meet critical safety standards while providing a wealth of features and world-class accuracy. Each handheld comes in vivid orange cases that provide greater visibility and serves to emphasize investment protection through feature sets that go beyond those of typical handhelds.
Handle big currents - safely with NEW handheld clamp meters from Agilent
Key features:
Large clamp opening of 52 mm or 2” High measurement capability of up to 1000 A for AC, DC or AC+DC CAT III 1000 V/CAT IV 600 V safety rating Includes full-featured DMM with resistance, capacitance, frequency and temperature functions High resolution measurements - measure current as low as 0.01 A Peak hold capability
Measurements of electrical distribution cables can be challenging and risky. For cables up to two inches in diameter, the Agilent U1210 Series handheld clamp meters enable high-current measurements without breaking the circuit. Unlike most clamp meters, they also include DMM capabilities—resistance, capacitance, frequency and temperature—to simplify troubleshooting during installation and maintenance. Best of all, they provide an extra layer of protection with CAT IV 600V and CAT III 1000 V safety ratings.
Electronics, Electrical, Installation & Maintenance
Imagine razor-sharp readings with the U1253A/U1253B OLED handheld DMM
MORE HANDHELD DIGITAL MULTIMETERS
Be well equipped from the start
with Agilent U1250 Series digital multimeters
The process of isolating faults is always unpredictable—so it’s good to be equipped with a versatile DMM that simplifies analysis, accelerates glitch detection and makes it easier to probe hard-to-reach points. Optimize electronics troubleshooting with the accuracy, capabilities, and accessories you need to get started in no time.
Features
High contrast ratio of 2000:1 and wide viewing angle of 160° (For U1253A/U1253B) 50,000 counts high resolution and up to 0.025% low error rate Built-in square-wave generator and frequency counter Includes additional 4-mm tip probes and Certification of Calibration Data logging to instrument and PC
A testament to innovation and credibility, 2006
Best Value Portable Test Equipment, 2006
General-purpose instruments category, 2009
Category Winner, EC&M Product of the Year competition, 2009
Check more, fix more, spend less
with Agilent U1240 Series digital multimeters
Installation and maintenance of machinery, electrical systems and more often require numerous quick checks and fixes, sometimes under hazardous conditions. Whether you need to quickly inspect power supplies for harmonics, detect glitches in switch systems or monitor differential temperature, the U1240 Series of handheld digital multimeters (DMMs) is up to the task. With all you need in one portable instrument, you can travel light and finish the day’s work with ease. Plus, you’ll be glad to know it’s easy to own one, even with the DMM’s rich capabilities.
Features
Low micro-amp and high Mega-ohm ranges Switch/Relay counter for glitch detection Harmonic ratio measurement in AC supplies Dual and differential temperature measurements Data logging to instrument on the go Includes additional 4-mm tip probes and Certification of Calibration
2
Electronics, Electrical, Installation & Maintenance
HANDHELD DIGITAL OSCILLOSCOPES
Make high performance measurements on the go
with Agilent U1600 Series digital oscilloscopes
A scope with a color waveform display. A DMM for basic measurements. A data logger to record DMM readings to a PC. All three capabilities are in one instrument—the U1600 Series of handheld digital oscilloscopes. Designed to address the portability needs of various installation and maintenance applications, these scopes enable clear waveform viewing, easy waveform analysis and quick isolation of signal glitches. With high-performance features loaded into one robust package, mobile troubleshooting is a breeze.
Features
Built-in DMM and data logger Large 4.5-inch color display 200 MSa/s high sampling rate and deep memory Built-in Quick Help, available in multiple languages Data logging to instrument and PC Convenient data download to USB flash drive*
*with Option 001
No. 1 Product of the Year as voted by readers—2006
Electronics
HANDHELD CAPACITANCE & LCR METERS
Test passive components conveniently, affordably and reliably
with the Agilent U1700 Series capacitance/LCR meters — extending the tradition of industry-leading benchtop units
Sharing a bench LCR meter is practical, but isn’t always convenient. With Agilent’s new line of handheld capacitance and LCR meters, you can perform quick, basic LCR measurements at your convenience. Better yet, our handheld models extend the tradition of our industry-leading benchtop units to a lower price point. Now, everyone on your team can be equipped for passive-component testing—on the bench or on the go—without the wait.
Features
Up to 20,000 counts resolution with dual display Wide capacitance measurement up to 199.99 mF* Wide LCR range with up to 4 test frequencies** Auto-calculation of phase angle, D and Q factors** Compare mode with 25 High/Low limit settings* Relative and Tolerance modes
*with U1701A/U1701B **with handheld LCR meters (phase angle calculation only with U1732A/U1732B)
3
Industrial Processes
Calibrate process control parts easily with using just one tool
with the Agilent U1401A/U1401B multi-function calibrator/meter
More often than not, the calibration of process control parts requires simultaneous measurements with a DMM. Carry two tools in one—and calibrate while you measure—with the Agilent U1401A/U1401B handheld multi-function calibrator/meter. Now you can travel light, whether you’re doing calibration for validation, troubleshooting, or service and maintenance. Slip the robust U1401A/U1401B in its sturdy carrying case and you’re ready to go.
Features
50,000-count resolution on dual display Simultaneous source and measure capabilities Bipolar voltage and current, square-wave, auto scan and ramp outputs Full-span DMM measurement and recording functions Built-in charging capability
Model no. U1211A U1212A U1213A U1241A/U1241B U1242A/U1242B U1251A/U1251B U1252A/U1252B U1253A/U1253B U1253A-001 U1401A/U1401B U1602A/U1602B U1604A/U1604B U1701A/U1701B U1731A/U1731B U1732A/U1732B
Description True-rms 1000 A Handheld Clamp Meter True-rms 1000 A Handheld Clamp Meter True-rms 1000 A Handheld Clamp Meter True-rms 10,000 Count Handheld DMM True-rms 10,000 Count Handheld DMM with Datalogging 50,000 Count Handheld DMM 50,000 Count Handheld DMM with Freq Counter, Logic Output and Data Logging 50,000 Count Handheld DMM with OLED Display Includes soft carrying case, SMT grabbers and fine-tip test probes Handheld Multi-Function Calibrator or Meter 20 MHz Handheld Digital Oscilloscope 40 MHz Handheld Digital Oscilloscope 11,000 Count Dual Display Handheld Capacitance Meter 20,000 Count Dual Display Handheld LCR Meter, 120 Hz/1 kHz 20,000 Count Dual Display Handheld LCR Meter, 100 Hz/120 Hz/1 kHz/10 kHz For more information on Agilent Technologies’ products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Product specifications and descriptions in this document subject to change without notice. © Agilent Technologies, Inc. 2010 Printed in USA, May 26, 2010 5990-5316EN
A wide range of accessories is available.
www.agilent.com/find/handheld-tools
