Camera Cmos

Published on January 2017 | Categories: Documents | Downloads: 41 | Comments: 0 | Views: 259
of 3
Download PDF   Embed   Report

Comments

Content

CMOS Camera Module CM1314YFM




Color recovery and correction, sharpening, gamma correction, lens shading
correction, and on-the-fly defect correction

Auto exposure, auto white balance (AWB), auto black reference (ABR), auto
flicker avoidance, auto color saturation, and auto defect identification and
correction

CM1314YFM - Specification
Image Sensor

1/4“ CMOS sensor (Micron MT9M112)

Number of pixels

1.3MPixel (1280 x 1024 pixels)

Output data format

YUV (YCbCr)

Lens

3 Plastic Lenses

Optical Filter

Include Infrared coating (650nm±10nm)

Focal length, F-no.

f=4mm±0.1mm, F2.0±5%

Angle of View (D)

59.3°±0.5°

Distortion

”1%

Focus distance

120cm ±2cm

Focus range

60cm to Infinity

Power-supply voltage

Analog:
Digital:
I/O:

Clock

6-54 MHz (PLL enabled)

Power consumption

200mW at 15fps, full resolution

Chip interface

Two-wire serial bus interface (I²C Bus)

I/O connector

NAIS: AXK8L28125 (28 pin)

Module head size

8.0mm(W) x 8.0mm (D) x (5.6 ±0.2)mm(H)

Stand by current

<20uA (clock off)

2.8 V
1.8 V
2.8 V

CM1314YFM - Drawing

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close