Introduction
This appendix describes the accessibility features for Oracle Hyperion Enterprise Performance Management System Installer and Oracle Hyperion Enterprise Performance Management System Configurator. Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&ID=info, or visit http:// www.oracle.com/pls/topic/lookup?ctx=acc&ID=trs if your are hearing-impaired. For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&ID=docacc.
Enabling Accessibility for EPM System Installer and EPM System Configurator
You must launch EPM System Installer and EPM System Configurator in console mode to use their accessible versions.
ä To use an accessible version of EPM System Installer:
1
Launch EPM System Installer in console mode:
l
(Windows) From a Windows console, change to the root directory to which you extracted the EPM System Installer files and type installTool.cmd -console. (UNIX) Change to the root directory to which you extracted the EPM System Installer files and enter ./installTool.sh -console.
Tip: If you are using JAWS screen reader software and want to interrupt reading of large
l
text blocks (for example, the list of assemblies or Welcome text in Oracle Hyperion Enterprise Performance Management System Installer), press Ctrl. To re-read a prompt line, press Insert + Up Arrow or Down Arrow. To re-read an entire dialog box, press Ctrl + 5.
2
For each prompt, enter the number beside the selection you want. In some cases, you are also prompted to enter text.
Tip: You can press Enter to accept the default selection and move to the next prompt. The
default selection is enclosed in square brackets at the end of the prompt, for example: Press 0 for Help, 1 for Next, 2 to Cancel or 3 to Redisplay [1]. In this case, pressing Enter selects option 1 for Next.
ä To use an accessible version of EPM System Configurator:
1
Launch Oracle Hyperion Enterprise Performance Management System Configurator in console mode:
l
(Windows) From a Windows console, change to EPM_ORACLE_HOME/common/ config/version_number, and then enter configtool.bat -console.
2
Accessibility Guide
l
(UNIX) Change to EPM_ORACLE_HOME/common/config/version_number and then enter ./configtool.sh —console
2
For each prompt, enter the number beside the selection you want. In some cases, you are also prompted to enter text.
Tip: You can press Enter to accept the default selection and move to the next prompt. The
default selection is enclosed in square brackets at the end of the prompt, for example: Press 0 for Help, 1 for Next, 2 to Cancel or 3 to Redisplay [1]. In this case, pressing Enter selects option 1 for Next.
EPM System Installer and EPM System Configurator Keyboard Equivalents
This section describes the keyboard equivalents for these kinds of prompts:
l
Navigation Product selection Yes or No
Keyboard Equivalents Actions
l
l
l
Table 1
Key 0
At a navigation prompt – Help Help is displayed in the Console window. At a product selection prompt – Select At a yes or no prompt – Yes At a navigation prompt – Previous (in most cases) At a product selection prompt – Deselect At a yes or no prompt – No At a navigation prompt – Next (in most cases) At a product selection prompt – Expand At a navigation prompt – Cancel (in most cases) At a product selection prompt – Cancel At a navigation prompt – Redisplay (in most cases) or Load, Save
l l
1
l l l
2
l l
3
l l
4 Enter
l
Accept the default selection and move to the next prompt. The default selection is enclosed in square brackets at the end of the prompt, for example: Press 0 for Help, 1 for Next, 2 to Cancel or 3 to Redisplay [1]. In this case, pressing Enter selects option 1 for Next.