Models
HP 1910-48G Switch HP 1910-24G-PoE (365 W) Switch HP 1910-24G-PoE (170 W) Switch HP 1910-24G Switch HP 1910-16G Switch HP 1910-8G Switch HP 1910-8G-PoE+ (65W) Switch HP 1910-8G-PoE+ (180W) Switch HP 1910-24 Switch HP 1910-8 Switch HP 1910-48 Switch HP 1910-8-PoE+ Switch HP 1910-24-PoE+ Switch JE009A JE007A JE008A JE006A JE005A JG348A JG349A JG350A JG538A JG536A JG540A JG537A JG539A
Key features
Customized operation using intuitive Web interface Layer 3 static routing with 32 routes for network segmentation and expansion Access control lists for granular security control Spanning Tree: STP, RSTP, and MSTP Lifetime warranty
Product overview
The HP 1910 Switch Series are advanced smart-managed fixed-configuration Gigabit and Fast Ethernet switches designed for small businesses in an easy-to-administer solution. By utilizing the latest design in silicon technology, this series is one of the most powerefficient in the market. The series has 13 models: eight gigabit and five Fast Ethernet. 8-, 16-, 24-, and 48-port 10/100/1000 models are equipped with additional Gigabit SFP ports for fiber connectivity; in addition to non-PoE models, the 8- and 24-port gigabit models are available with two different levels of PoE, or without. The 10/100 models are available with 8, 24 and 48 ports, and come with two additional combo uplink ports; the 8- and 24-port fast ethernet models are available with or without PoE. The HP 1910 Switch Series is a great value, with features to satisfy even the most advanced small business network. All models support rack mounting or desktop operation. Customizable features include basic layer 2 features like VLANs and link aggregation as well as advanced features such as Layer 3 static routing, IPv6, ACLs and Spanning Tree Protocols. These switches come with a lifetime warranty covering the unit, fans, power supplies and 24X7 phone support for first three years.
Features and benefits
Management Simple Web management allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 1
QuickSpecs
Overview
HP 1910 Switch Series
Single IP management enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices Secure Web GUI provides a secure, easy-to-use graphical interface for configuring the module via HTTPS SNMPv1, v2c, and v3 facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station Complete session logging provides detailed information for problem identification and resolution Dual flash images provides independent primary and secondary operating system files for backup while upgrading Port mirroring enables traffic on a port to be simultaneously sent to a network analyzer for monitoring Management security restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs provide telnet and SNMP access; local and remote syslog capabilities allow logging of all access Network Time Protocol (NTP) synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock-dependent devices within the network so that the devices can provide diverse applications based on the consistent time IEEE 802.1AB Link Layer Discovery Protocol (LLDP) advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications Limited CLI enables users to quickly deploy and troubleshoot devices in the network RMON provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events Default DHCP client mode allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of DHCP server on the network, the switch will fallback to a unique static address determined by the MAC address of the switch Quality of Service (QoS) Broadcast control allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic Rate limiting sets per-port ingress enforced maximums and per-port, per-queue minimums Traffic prioritization provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput Connectivity IPv6 IPv6 host enables switches to be managed and deployed at the IPv6 network's edge IPv6 routing supports IPv6 static routes MLD snooping forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding IPv6 ACL/QoS supports ACL and QoS for IPv6 network traffic
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 2
QuickSpecs
Overview
HP 1910 Switch Series
Auto-MDI/MDIX adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports IEEE 802.3X flow control provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node IEEE 802.3af Power over Ethernet (PoE) ready provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models) IEEE 802.3at Power over Ethernet (PoE+) provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+) Packet storm protection protects against broadcast, multicast, or unicast storms with user-defined thresholds Cable diagnostics detects cable issues remotely, using a browser-based tool Security Advanced access control lists (ACLs) enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access Secure Sockets Layer (SSL) encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch IEEE 802.1X and RADIUS network logins controls port-based access for authentication and accountability Automatic VLAN assignment assigns users automatically to the appropriate VLAN based on their identity, location and time of day STP BPDU port protection blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks STP root guard protects the root bridge from malicious attacks or configuration mistake Automatic denial-of-service protection monitors for malicious attacks and protects the network by blocking the attacks Management password provides security so that only authorized access to the Web browser interface is allowed Performance Half-/full-duplex auto-negotiating capability on every port doubles the throughput of every port Selectable queue configurations allows for increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications IGMP snooping improves network performance through multicast filtering, instead of flooding traffic to all ports Fiber uplink provides greater distance connectivity using Gigabit fiber uplinks Layer 2 switching
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 3
QuickSpecs
Overview
HP 1910 Switch Series
VLAN support and tagging supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously Spanning Tree Protocol (STP) supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) BPDU filtering drops BPDU packets when STP is enabled globally but disabled on a specific port Jumbo frame support supports up to 10 kilobyte frame size to improve the performance of large data transfers Layer 3 services Address Resolution Protocol (ARP) determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network DHCP relay simplifies management of DHCP addresses in networks with multiple subnets Layer 3 routing NEW Static IPv4/IPv6 routing provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual configuration of routing Resiliency and high availability Available redundant power supply provides additional PoE of up to 740 W for high-power applications like HP Gigabit Ethernet IntelliJack switches; the HP RPS1600 Redundant Power System (JG136A), sold separately, is only for use with the 1910-24G-PoE (365W) Switch model Link aggregation groups together multiple ports (up to a maximum of 2 ports) automatically using Link Aggregation Control Protocol (LACP), or manually, to form an ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks Convergence LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones PoE allocations supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings Auto voice VLAN recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones Additional information Green initiative support provides support for RoHS and WEEE regulation Green IT and power improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 4
QuickSpecs
Overview
Warranty and support
HP 1910 Switch Series
Lifetime Warranty 2.0 advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)† Electronic and telephone support (for Lifetime Warranty 2.0) limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is available from HP for the entire warranty period; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to www.hp.com/networking/warrantysummary †HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch Communication zl Module powered by Microsoft Lync has a five-year hardware warranty. For details, refer to the Software license and hardware warranty statements at www.hp.com/networking/warranty.
DA - 13677 Worldwide — Version 13 — February 25, 2014
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackJG536A See Configuration Note: 2,3
JG537A See Configuration Note:2,3
JG348A See Configuration Note: 4,5
JG348A#B2B
JG348A#B2C
JG349A See Configuration Note: 4,5
JG349A#B2B
JG349A#B2C
JG350A See Configuration Note:4,5
JG350A#B2B
DA - 13677 Worldwide — Version 13 — February 25, 2014
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 8
QuickSpecs
Configuration
Configuration Rules: Note 1 The following Transceivers install into this switch: HP X121 1G SFP LC SX Transceiver HP X121 1G SFP LC LX Transceiver HP X121 1G SFP RJ45 T Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X125 1G SFP RJ45 T Transceiver HP X125 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH70 Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D Transceiver Localization required. (See Localization Menu for list.) The following Transceivers install into this switch: HP X121 1G SFP LC SX Transceiver HP X121 1G SFP LC LX Transceiver HP X120 1G SFP LC LX Transceiver The following Transceivers install into this switch: HP X121 1G SFP LC SX Transceiver HP X121 1G SFP LC LX Transceiver HP X121 1G SFP RJ45 T Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X120 1G SFP RJ45 T Transceiver HP X125 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH70 Transceiver
Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See Localization Menu)
Internal or External Power Supplies(Model Dependant)
Internal Power supplies Included External Redundant Power Supplies HP RPS1600 Redundant Power System Height = 1U includes 1 x c13, 1600w and Power Supply port JG136A See Configuration Note:2,3,4
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 9
QuickSpecs
Configuration
HP RPS1600 1600W AC Power Supply Installs into JG136A only
HP 1910 Switch Series
JG137A See Configuration Note:1,3
Configuration Rules: Note 1 If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or onsite. Localization required. Each switch will only support 1 JG136A and 1 JG137A Power supply systems. This power supply only supported on switch JE007A.
Note 2 Note 3 Note 4
Options for the HP 1600 External RPS Power Supply HP X290 1000 A JD5 2m RPS Cable JD187A See Configuration Note:1
Remark: Configuration Rules: Note 1
These cables are used to connect the External Power System to Switch.
This Cable is only supported on switch JE007A when used with the RPS 1600 (JG136A)
Transceivers
SFP Transceivers HP X121 1G SFP LC SX Transceiver HP X121 1G SFP LC LX Transceiver HP X121 1G SFP RJ45 T Transceiver HP X120 1G SFP LC SX Transceiver HP X120 1G SFP LC LX Transceiver HP X120 1G SFP RJ45 T Transceiver HP X120 1G SFP LC BX 10-U Transceiver HP X120 1G SFP LC BX 10-D Transceiver HP X125 1G SFP LC LH40 1310nm Transceiver HP X120 1G SFP LC LH40 1550nm Transceiver HP X125 1G SFP LC LH70 Transceiver J4858C J4859C J8177C JD118B JD119B JD089B JD098B JD099B JD061A JD062A JD063B
Cables
DA - 13677 Worldwide — Version 13 — February 25, 2014 Page 10
QuickSpecs
Configuration
Multi-Mode Cables HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 11
QuickSpecs
Technical Specifications
HP 1910-48G Switch (JE009A) Ports
HP 1910 Switch Series
Physical characteristics Memory and processor Mounting Performance
48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 4 SFP 1000 Mbps ports 1 RJ-45 console port to access limited CLI port Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination Dimensions 17.4(w) x 10.24(d) x 1.7(h) in (44.2 x 26.01 x 4.32 cm) (1U height) Weight Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size 6.8 lb (3.08 kg) ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 77.4 Mpps (64-byte packets) 104 Gbps 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 50/60 Hz 100-240 VAC 59.8 W
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Environment
Operating temperature Operating relative humidity Nonoperating/Storage temperature Nonoperating/Storage relative humidity
Electrical characteristics Frequency Achieved Miercom Certified Voltage Green Award Maximum power rating Notes
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP ports and copper ports work simultaneously, independent of each other to give a total of 52 Gigabit-capable ports. 3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E) 3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW036E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW488E) DA - 13677 Worldwide — Version 13 — February 25, 2014 Page 12
QuickSpecs
Technical Specifications
HP 1910 Switch Series
3-year, 24x7 SW phone support, software updates (UV807E) 3-year, 24x7 SW phone support, software updates (UV789E) 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR684E) Installation with minimum configuration, system-based pricing (UY901E) Installation with HP-provided configuration, system-based pricing (UY902E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E) 4-year, 24x7 SW phone support, software updates (UV790E) 4-year, 24x7 SW phone support, software updates (UV808E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E) 5-year, 24x7 SW phone support, software updates (UV791E) 5-year, 24x7 SW phone support, software updates (UV809E) 3 Yr 6 hr Call-to-Repair Onsite (UW491E) 3 Yr 6 hr Call-to-Repair Onsite (UW039E) 4 Yr 6 hr Call-to-Repair Onsite (UW492E) 4 Yr 6 hr Call-to-Repair Onsite (UW040E) 5 Yr 6 hr Call-to-Repair Onsite (UW493E) 5 Yr 6 hr Call-to-Repair Onsite (UW041E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E) Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-24G-PoE (365 W) Switch (JE007A) Ports 24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE) 4 SFP 1000 Mbps ports 1 RJ-45 console port to access limited CLI port Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination Dimensions 17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 6.8 lb (3.08 kg) ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 13
QuickSpecs
Technical Specifications
1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity Electrical characteristics Frequency Voltage Maximum power rating PoE power Notes < 5 µs up to 41.7 Mpps (64-byte packets) 56 Gbps 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 50 / 60 Hz 100-240 VAC 523 W 365 W
HP 1910 Switch Series
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS). UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. 3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW036E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW488E) 3-year, 24x7 SW phone support, software updates (UV807E) 3-year, 24x7 SW phone support, software updates (UV789E) 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR684E) Installation with minimum configuration, system-based pricing (UY901E) Installation with minimum configuration, system-based pricing (UW451E) Installation with HP-provided configuration, system-based pricing (UY902E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 14
QuickSpecs
Technical Specifications
HP 1910 Switch Series
4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E) 4-year, 24x7 SW phone support, software updates (UV790E) 4-year, 24x7 SW phone support, software updates (UV808E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E) 5-year, 24x7 SW phone support, software updates (UV791E) 5-year, 24x7 SW phone support, software updates (UV809E) 3 Yr 6 hr Call-to-Repair Onsite (UW491E) 3 Yr 6 hr Call-to-Repair Onsite (UW039E) 4 Yr 6 hr Call-to-Repair Onsite (UW492E) 4 Yr 6 hr Call-to-Repair Onsite (UW040E) 5 Yr 6 hr Call-to-Repair Onsite (UW493E) 5 Yr 6 hr Call-to-Repair Onsite (UW041E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E) Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-24G-PoE (170 W) Switch (JE008A) Ports 24 RJ-45 auto-negotiating 10/100/1000 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE) 4 SFP 1000 Mbps ports 1 RJ-45 console port to access limited CLI port Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination Dimensions 17.4(w) x 16.54(d) x 1.7(h) in (44.2 x 42.01 x 4.32 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature 6.8 lb (3.08 kg) ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 41.7 Mpps (64-byte packets) 56 Gbps 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 113°F (0°C to 45°C)
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 15
QuickSpecs
Technical Specifications
Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity Electrical characteristics Frequency Voltage Maximum power rating PoE power Notes 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 50 / 60 Hz 100-240 VAC 255 W 170 W
HP 1910 Switch Series
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. 3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW036E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW488E) 3-year, 24x7 SW phone support, software updates (UV807E) 3-year, 24x7 SW phone support, software updates (UV789E) 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR684E) Installation with minimum configuration, system-based pricing (UY901E) Installation with HP-provided configuration, system-based pricing (UY902E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E) 4-year, 24x7 SW phone support, software updates (UV790E) 4-year, 24x7 SW phone support, software updates (UV808E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 16
QuickSpecs
Technical Specifications
HP 1910 Switch Series
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E) 5-year, 24x7 SW phone support, software updates (UV791E) 5-year, 24x7 SW phone support, software updates (UV809E) 3 Yr 6 hr Call-to-Repair Onsite (UW491E) 3 Yr 6 hr Call-to-Repair Onsite (UW039E) 4 Yr 6 hr Call-to-Repair Onsite (UW492E) 4 Yr 6 hr Call-to-Repair Onsite (UW040E) 5 Yr 6 hr Call-to-Repair Onsite (UW493E) 5 Yr 6 hr Call-to-Repair Onsite (UW041E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E) Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-24G Switch (JE006A) Ports 24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 4 SFP 1000 Mbps ports 1 RJ-45 console port to access limited CLI port Supports a maximum of 24 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination Dimensions 17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity Electrical characteristics Frequency Voltage Maximum power rating 6.8 lb (3.08 kg) ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 41.7 million pps 56 Gbps 32 entries 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 50/60 Hz 100-240 VAC 31.5 W
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 17
QuickSpecs
Technical Specifications
Notes
HP 1910 Switch Series
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. 3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E) 3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW036E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW488E) 3-year, 24x7 SW phone support, software updates (UV807E) 3-year, 24x7 SW phone support, software updates (UV789E) 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR684E) Installation with minimum configuration, system-based pricing (UY901E) Installation with HP-provided configuration, system-based pricing (UY902E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E) 4-year, 24x7 SW phone support, software updates (UV790E) 4-year, 24x7 SW phone support, software updates (UV808E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E) 5-year, 24x7 SW phone support, software updates (UV791E) 5-year, 24x7 SW phone support, software updates (UV809E) 3 Yr 6 hr Call-to-Repair Onsite (UW491E) 3 Yr 6 hr Call-to-Repair Onsite (UW039E) 4 Yr 6 hr Call-to-Repair Onsite (UW492E) 4 Yr 6 hr Call-to-Repair Onsite (UW040E) 5 Yr 6 hr Call-to-Repair Onsite (UW493E) 5 Yr 6 hr Call-to-Repair Onsite (UW041E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E) Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. DA - 13677 Worldwide — Version 13 — February 25, 2014 Page 18
QuickSpecs
Technical Specifications
HP 1910-16G Switch (JE005A) Ports
HP 1910 Switch Series
Physical characteristics Memory and processor Mounting Performance
16 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 4 SFP 1000 Mbps ports 1 RJ-45 console port to access limited CLI port Supports a maximum of 16 autosensing 10/100/1000 ports plus 4 1000BASE-X SFP ports, or a combination Dimensions 17.4(w) x 6.3(d) x 1.7(h) in (44.2 x 16 x 4.32 cm) (1U height) Weight Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size 6.8 lb (3.08 kg) ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 29.8 million pps 40 Gbps 32 entries 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 50 / 60 Hz 100-240 VAC 25.1 W
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Environment
Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity
Electrical characteristics Frequency Voltage Maximum power rating Notes
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP ports and copper ports can work simultaneously, independent of each other to give a total of 20 Gigabit-capable ports. 3-year, 4-hour onsite, 13x5 coverage for hardware (UV786E) 3-year, 4-hour onsite, 24x7 coverage for hardware (UW485E) 3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW036E)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 19
QuickSpecs
Technical Specifications
HP 1910 Switch Series
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UW488E) 3-year, 24x7 SW phone support, software updates (UV807E) 3-year, 24x7 SW phone support, software updates (UV789E) 1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR682E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR683E) 1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support (HR684E) Installation with minimum configuration, system-based pricing (UY901E) Installation with HP-provided configuration, system-based pricing (UY902E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV787E) 4-year, 4-hour onsite, 13x5 coverage for hardware (UV805E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW034E) 4-year, 4-hour onsite, 24x7 coverage for hardware (UW486E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW037E) 4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW489E) 4-year, 24x7 SW phone support, software updates (UV790E) 4-year, 24x7 SW phone support, software updates (UV808E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV788E) 5-year, 4-hour onsite, 13x5 coverage for hardware (UV806E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW035E) 5-year, 4-hour onsite, 24x7 coverage for hardware (UW487E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW038E) 5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UW490E) 5-year, 24x7 SW phone support, software updates (UV791E) 5-year, 24x7 SW phone support, software updates (UV809E) 3 Yr 6 hr Call-to-Repair Onsite (UW491E) 3 Yr 6 hr Call-to-Repair Onsite (UW039E) 4 Yr 6 hr Call-to-Repair Onsite (UW492E) 4 Yr 6 hr Call-to-Repair Onsite (UW040E) 5 Yr 6 hr Call-to-Repair Onsite (UW493E) 5 Yr 6 hr Call-to-Repair Onsite (UW041E) 1-year, 6 hour Call-To-Repair Onsite for hardware (HR686E) Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 20
QuickSpecs
Technical Specifications
HP 1910-8G Switch (JG348A) Ports
HP 1910 Switch Series
Physical characteristics Memory and processor Mounting Performance
8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) 1 SFP 1000 Mbps port 1 RJ-45 console port to access limited CLI port Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a combination Dimensions 8.27(w) x 8.27(d) x 1.72(h) in (21 x 21 x 4.36 cm) (1U height) Weight Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size 4.41 lb (2 kg), Fully loaded ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 13.4 million pps 18 Gbps 32 entries 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 100-240 VAC 14.4 W 50/60 Hz
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Environment
Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity
Electrical characteristics Voltage Maximum power rating Frequency
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP port and copper ports work simultaneously, independent of each other to give a total of 9 Gigabitcapable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-8G-PoE+ (65W) Switch (JG349A)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 21
QuickSpecs
Technical Specifications
Ports
HP 1910 Switch Series
Physical characteristics Memory and processor Mounting Performance
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) 1 SFP 1000 Mbps port 1 RJ-45 console port to access limited CLI port Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a combination Dimensions 10.24(w) x 11.81(d) x 1.72(h) in (26 x 30 x 4.36 cm) (1U height) Weight Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size 6.61 lb (3 kg), Fully loaded ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 13.4 million pps 18 Gbps 32 entries 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 100-240 VAC 93 W 65 W 50/60 Hz
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Environment
Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity
Electrical characteristics Voltage Maximum power rating PoE power Frequency
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP port and copper ports work simultaneously, independent of each other to give a total of 9 Gigabitcapable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 22
QuickSpecs
Technical Specifications
HP 1910-8G-PoE+ (180W) Switch (JG350A) Ports
HP 1910 Switch Series
Physical characteristics Memory and processor Mounting Performance
8 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at) 1 SFP 1000 Mbps port 1 RJ-45 console port to access limited CLI port Supports a maximum of 8 autosensing 10/100/1000 ports plus 1 1000BASE-X SFP ports, or a combination Dimensions 10.24(w) x 11.81(d) x 1.72(h) in (26 x 30 x 4.36 cm) (1U height) Weight Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size 6.61 lb (3 kg), Fully loaded ARM @ 333 MHz, 128 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 13.4 million pps 18 Gbps 32 entries 8192 entries 32°F to 113°F (0°C to 45°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, non-condensing 50/60 Hz 100-240 VAC 228 W 180 W
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Environment
Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity
Electrical characteristics Frequency Voltage Maximum power rating PoE power
Safety Emissions Management Notes Services
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies. UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03 FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB SFP port and copper ports work simultaneously, independent of each other to give a total of 9 Gigabitcapable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 23
QuickSpecs
Technical Specifications
HP 1910-24 Switch (JG538A) Ports
HP 1910 Switch Series
Physical characteristics Memory and processor Mounting Performance
24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T) 1 RJ-45 console port to access limited CLI port Supports a maximum of 24 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, with optional module Dimensions 17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height) Weight Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size 4.85 lb (2.2 kg) MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 6.6 Mpps (64-byte packets) 8.8 Gb/s 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 104°F (0°C to 40°C) 10% to 90%, noncondensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, noncondensing 50/60 Hz 100-240 VAC 12 W
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Environment
Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity
Electrical characteristics Frequency Voltage Maximum power rating
Safety Emissions Management Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928 (3CRBSG2893) and may ship with this product labeling. SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports.
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 24
QuickSpecs
Technical Specifications
Services
HP 1910 Switch Series
Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-8 Switch (JG536A) Ports 8 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T) 1 RJ-45 console port to access limited CLI port Supports a maximum of 8 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, or a combination Dimensions 10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity Electrical characteristics Frequency Voltage Maximum power rating 2.2 lb (1 kg) MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 4.2 Mpps (64-byte packets) 5.6 Gb/s 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 104°F (0°C to 40°C) 10% to 90%, noncondensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, noncondensing 50/60 Hz 100-240 VAC 8W
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Safety Emissions Management
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 25
QuickSpecs
Technical Specifications
Notes
HP 1910 Switch Series
Services
The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928 (3CRBSG2893) and may ship with this product labeling. SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-48 Switch (JG540A) Ports 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full 2 SFP 1000 Mbps ports 2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 1 RJ-45 console port to access limited CLI port Supports a maximum of 48 autosensing 10/100 ports plus 2 1000BASE-X SFP ports plus 2 autosensing 10/100/1000 ports, or a combination Dimensions 17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity Electrical characteristics Frequency Voltage Maximum power rating 5.07 lb (2.3 kg) MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 1.5 MB < 5 µs < 5 µs up to 13.1 Mpps (64-byte packets) 17.6 Gb/s 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 104°F (0°C to 40°C) 10% to 90%, noncondensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, noncondensing 50/60 Hz 100-240 VAC 22 W
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
Safety
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition
DA - 13677 Worldwide — Version 13 — February 25, 2014
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928 (3CRBSG2893) and may ship with this product labeling. SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1910-8-PoE+ Switch (JG537A) Ports 8 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Duplex: half or full 2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T) 1 RJ-45 console port to access limited CLI port Supports a maximum of 8 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, or a combination Dimensions 12.99(w) x 9.06(d) x 1.73(h) in (33 x 23 x 4.4 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity Electrical characteristics Frequency Voltage Maximum power rating PoE power 4.63 lb (2.1 kg) MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 4.2 Mpps (64-byte packets) 5.6 Gb/s 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 104°F (0°C to 40°C) 10% to 90%, noncondensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, noncondensing 50/60 Hz 100-240 VAC 90 W 62 W
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 27
QuickSpecs
Technical Specifications
HP 1910 Switch Series
Safety Emissions Management Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS). IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928 (3CRBSG2893) and may ship with this product labeling. SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
HP 1910-24-PoE+ Switch (JG539A) Ports 24 RJ-45 autosensing 10/100 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3at PoE+); Duplex: half or full 2 SFP dual-personality 1000 Mbps ports (IEEE 802.3ab Type 1000BASE-T) 1 RJ-45 console port to access limited CLI port Supports a maximum of 24 autosensing 10/100 ports plus 2 1000BASE-X SFP ports, or a combination Dimensions 17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height) Weight Memory and processor Mounting Performance Module 100 Mb Latency 1000 Mb Latency Throughput Routing/Switching capacity Routing table size MAC address table size Environment Operating temperature Operating relative humidity Non-operating/Storage temperature Non-operating/Storage relative humidity 7.28 lb (3.3 kg) MIPS @ 500 MHz, 32 MB flash, 128 MB RAM; packet buffer size: 512 KB < 5 µs < 5 µs up to 6.6 Mpps (64-byte packets) 8.8 Gb/s 32 entries (IPv4), 32 entries (IPv6) 8192 entries 32°F to 104°F (0°C to 40°C) 10% to 90%, non-condensing -40°F to 158°F (-40°C to 70°C) 10% to 95%, noncondensing
Physical characteristics
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 28
QuickSpecs
Technical Specifications
Electrical characteristics Frequency Voltage Maximum power rating PoE power 50/60 Hz 100-240 VAC 220 W 180 W
HP 1910 Switch Series
Safety Emissions Management Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS). IEC 60950-1; EN 60950-1; UL 60950-1 2nd Edition; CSA C22.2 No. 60950-1-07 2nd Edition FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A IMC - Intelligent Management Center; limited command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB The HP 1910-24G Switch (JE006A) was formerly sold as the 3Com Baseline Plus 2928 (3CRBSG2893) and may ship with this product labeling. SFP ports and copper ports can work simultaneously, independent of each other to give a total of 28 Gigabit-capable ports. Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
Standards and protocols (applies to all products in series)
Device management RFC 2819 RMON General protocols IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s (MSTP) IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE 802.3 Type 10BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3i 10BASE-T IEEE 802.3x Flow Control IEEE 802.3z 1000BASE-X MIBs RFC 1213 MIB II RFC 1493 Bridge MIB RFC 2021 RMONv2 MIB RFC 2233 Interface MIB RFC 2233 Interfaces MIB RFC 2571 SNMP Framework MIB RFC 2572 SNMP-MPD MIB RFC 2573 SNMP-Notification MIB
DA - 13677 Worldwide — Version 13 — February 25, 2014
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 31
QuickSpecs
Accessory Product Details
HP 1910 Switch Series
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HP X121 1G SFP LC SX Transceiver (J4858C) A small form-factor pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550 m on multimode fiber.
Ports Physical characteristics
1 LC 1000BASE-SX port; Duplex: full only Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm) Weight: 0.04 lb. (0.02 kg) Transceiver form factor: SFP Environment Operating temperature: 32°F to 158°F (0°C to 70°C) Operating relative humidity: 5% to 85%, noncondensing Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C) Altitude: up to 10,000 ft. (3 km) Electrical characteristics Power consumption typical: 0.4 W Power consumption maximum: 0.7 W Cabling Type: 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance: 2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth 2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth 2-500 m (50 µm core diameter, 400 MHz*km bandwidth) 2-550 m (50 µm core diameter, 500 MHz*km bandwidth) Cable length: 2-550m Fiber type: Multi Mode Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. 1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm) Weight:0.04 lb. (0.02 kg) Operating temperature: 32°F to 158°F (0°C to 70°C) Operating relative humidity: 0% to 85%, noncondensing Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C) Altitude: up to 10,000 ft. (3 km) Type: Either single mode or multimode; 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively; Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1; Maximum distance:
Services
HP X121 1G SFP LC LX Transceiver (J4859C)
Ports Physical characteristics
HP X121 1G SFP LC LX Environment Transceiver: An SFP format gigabit transceiver with LC connectors using LX technology. Cabling
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 32
QuickSpecs
Accessory Product Details
HP 1910 Switch Series
Notes
Services
2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth) 2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth) 2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth) 2-10,000 m (single-mode fiber) A mode conditioning patch cord may be needed in some multimode fiber installations. Wavelength: 1310nm Power Consumption: < 500mW Typical Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. 1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full only Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm) Weight: 0.06 lb. (0.03 kg) Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow over the SFP module Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C) Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C), noncondensing Altitude: up to 10,000 ft. (3000 km)
HP X121 1G SFP RJ45 T Transceiver (J8177C)
Ports Physical characteristics
HP X121 1G SFP RJ45 T Environment Transceiver: An SFP format gigabit transceiver with RJ45 connectors using 1000BaseT technology.
Cabling
Cable type: 1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T; Maximum distance: 100 m Power consumption is nominally 1 watt. For supported platforms and minimum software requirements to support this product, see the document titled "Support for the J8177C 1000Base-T MiniGBIC" on the "HP Mini-GBICs and SFPs" Manuals Web page. The J8177C Gigabit copper mini-GBIC is not supported on dual-personality ports. The J8177C is capable of 100 Mb operation. This is supported on only the HP E8200zl, E5400zl, and HP E6200-24G-mGBIC yl Switches using software version K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation. Important: The earlier J8177B does not support 100 Mb operation. When used in the Switch gl 20-Port 10/100/1000 Module (J4908A), the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC port, but will block access to the other port.
Notes
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 33
QuickSpecs
Accessory Product Details
Services
HP 1910 Switch Series
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC SX Transceiver (JD118B)
Ports Connectivity
1 LC 1000BASE-SX port Connector type Wavelength Dimensions LC 850 nm
A small form-factor Physical characteristics pluggable (SFP) Gigabit SX transceiver that provides a full-duplex Gigabit solution up to 550m on a Multimode Electrical characteristics fiber.
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) Full configuration weight 0.04 lb. (0.02 kg) Power consumption typical Power consumption maximum 0.8 W 1.0 W
Cabling
Services
Maximum distance: • FDDI Grade distance = 220m • OM1 = 275m • OM2 = 500m • OM3 = Not Specified by standard Cable length up to 550m Fiber type Multi Mode Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X120 1G SFP LC LX Transceiver (JD119B)
Ports Connectivity
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX) Connector type Wavelength LC 1300 nm 2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17 cm) 0.04 lb. (0.02 kg) 0.8 W 1.0 W
A small form-factor Physical characteristics Dimensions pluggable (SFP) Gigabig LX transceiver that provides a Full configuration weight full duplex Gigabit solution Electrical characteristics Power consumption up to 550m on MMF or typical 10Km on SMF Power consumption maximum Cabling
Cable type: Either single mode or multimode; Maximum distance: • 550m for Multimode • 10km for Singlemode Fiber type
Both
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 34
QuickSpecs
Accessory Product Details
Services
HP 1910 Switch Series
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP X120 1G SFP RJ45 T Transceiver (JD089B)
Ports Connectivity Physical characteristics
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T) Connector type Dimensions RJ-45 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm) Full configuration weight 0.07 lb. (0.03 kg) 0.8 W 1.0 W
Electrical characteristics Power consumption typical Power consumption maximum Cabling
Cable type: 1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab 1000BASE-T Maximum distance: • 100m Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
HP 0.5 m Multimode OM3 Cabling LC/LC Optical Cable (AJ833A)
Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber and designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic.
Notes
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 35
QuickSpecs
Accessory Product Details
HP 1910 Switch Series
Services
Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
HP 1 m Multimode OM3 LC/LC Optical Cable (AJ834A)
Cabling
Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic. Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Notes
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 36
QuickSpecs
Accessory Product Details
HP 2 m Multimode OM3 LC/LC Optical Cable (AJ835A) Cabling
HP 1910 Switch Series
Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic. Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Notes
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 37
QuickSpecs
Accessory Product Details
HP 5 m Multimode OM3 LC/LC Optical Cable (AJ836A) Cabling
HP 1910 Switch Series
Cable type: 50/125 µm core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: This specification defines the detail requirements for a tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic. Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Notes
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 38
QuickSpecs
Accessory Product Details
HP 15 m Multimode OM3 LC/LC Optical Cable (AJ837A) Cabling
HP 1910 Switch Series
Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic. Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Notes
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 39
QuickSpecs
Accessory Product Details
HP 30 m Multimode OM3 LC/LC Optical Cable (AJ838A) Cabling
HP 1910 Switch Series
Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic. Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Notes
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 40
QuickSpecs
Accessory Product Details
HP 50 m Multimode OM3 LC/LC Optical Cable (AJ839A) Cabling
HP 1910 Switch Series
Cable type: 50/125 µm (core/cladding) diameter, mulitimode fiber optic, with effective modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for distances of up to 300 m; Maximum distance: 10Gbps Transfer Rate (Ethernet): 300m Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable and Ethernet assembly with LC duplex connectors on one end and LC duplex connectors on other end. Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ± 2.0um Coating diameter: 245 ± 10um Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km @850/1300nm. Optical Glass: For Laser sources: 2000/500 MHz-km @850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600 meters @850/1300nm for Gigabit Ethernet compliant links. CABLE: The cable is duplex zipcord graded index 50/125um multimode optical fiber. The cable is designed to work in both the 850 and 1300 nm wavelength windows. BULK CABLE & CABLE ASSEMBLY CONFIGURATION: Jacket Material: Riser Grade - Low Smoke Zero Halogen thermoplastic. Jacket Color: Aqua for OM3 multimode per TIA 598 Boot Color: White Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003 dB/M added for lengths > 30 meters. Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @ 1310 nm @ 23°C as tested in accordance with EIA 455-46. Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Notes
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 41
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A) Notes
HP 1910 Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end. • Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um • Bandwidth: 3000 MHz-km @ 850nm (Laser) • Jacket Color: Blue • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic • Boot Color: White • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable. • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45 Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end. • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um • Bandwidth: 3000 MHz-km @ 850nm (Laser) • Jacket Color: Blue • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic • Boot Color: White • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable. • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45 Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 42
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A) Notes
HP 1910 Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end. • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um • Bandwidth: 3000 MHz-km @ 850nm (Laser) • Jacket Color: Blue • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic • Boot Color: White • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable. • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45 Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end. • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um • Bandwidth: 3000 MHz-km @ 850nm (Laser) • Jacket Color: Blue • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic • Boot Color: White • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable. • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45 Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
DA - 13677 Worldwide — Version 13 — February 25, 2014
Page 43
QuickSpecs
Accessory Product Details
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A) Notes
HP 1910 Switch Series
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end. • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um • Bandwidth: 3000 MHz-km @ 850nm (Laser) • Jacket Color: Blue • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic • Boot Color: White • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable. • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45 Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
Services
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)
Notes
Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+ 50/125um duplex cable and Ethernet assembly with LC duplex connectors on each end. • Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating diameter: 245 ± 10um • Bandwidth: 3000 MHz-km @ 850nm (Laser) • Jacket Color: Blue • Jacket Material: Riser Grade – Low Smoke Zero Halogen (LSZH) thermoplastic • Boot Color: White • Outer Jacket Print: HP PremierFlex OM3+ Fiber Optic Cable, 50/125um, Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal white stripe that runs the entire length of the cable. • Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m added for lengths >30m • Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm @ 23°C as tested in accordance with EIA 455-45 Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.