Online Users Guide en En

Published on May 2016 | Categories: Documents | Downloads: 65 | Comments: 0 | Views: 635
of 166
Download PDF   Embed   Report

Comments

Content

V2.5

User’s Guide
Logitech Digital Video Security System

WARNING!
Due to the surveillance nature of this video security system and the discreet nature of its cameras, its
use may be subject to national, state, and/or local laws respecting copyright, right of publicity, and
privacy. Before using this system and cameras, you should become familiar with the pertinent laws,
regulations, and community standards that may bear on the use, publication, or distribution of
recordings to ensure compliance with applicable laws.

Copyright © Logitech 2008. No part of this document may be reproduced, transmitted, transcribed, stored in a
retrieval system, or translated into any language in any form or by any means without the written permission of
Logitech.
WiLife, WiLife Command Center, and WiLife Online are registered trademarks or trademarks of Logitech.
Microsoft .NET Framework, Microsoft, Windows, Windows Me, Windows XP, Windows Vista are registered
trademarks or trademarks of Microsoft Corporation. All other product or service names are the property of their
respective owners.
Portions of the Logitech hardware and software have pending patents.

i

WiLife User Guide

ii

Table of Contents
WELCOME TO WILIFE.........................................................................................................................1
Introduction..............................................................................................................................................1
WiLife Video Security System Applications ........................................................................................2
Overview of the WiLife Video Security System.......................................................................................2
Basic Concepts ....................................................................................................................................2
System Components ...............................................................................................................................7
WiLife Kit Accessories .......................................................................................................................10
User Guide Chapters .........................................................................................................................11
The Command Center Help System .....................................................................................................11

GETTING STARTED.............................................................................................................................7
Overview...................................................................................................................................................7
System Requirements .............................................................................................................................8
Starter Kit Contents.................................................................................................................................9
Installation Procedures ...........................................................................................................................9
Step 1 - Run the Install Wizard ...........................................................................................................9
Step 2 – Complete the WiLife Setup Wizard ...................................................................................10
Firewall Setup ....................................................................................................................................13
Additional Cameras ...............................................................................................................................14
Indoor Camera Focus and Aim .............................................................................................................16
Switching Lenses on the Indoor Camera .............................................................................................16
Product Support.....................................................................................................................................17
Tip of the Day .........................................................................................................................................17

USING THE COMMAND CENTER ........................................................................................................ 18
Title Bar Controls ...............................................................................................................................18
Hiding Command Center Screen Controls .......................................................................................19
Main Feature Buttons .......................................................................................................................19
Live View ................................................................................................................................................20
Live Video Windows...........................................................................................................................20
Choose a Multiple-Camera View.......................................................................................................20
Alerts Scheduler Front Control Panel ...............................................................................................20
Use the Camera Activity Panel..........................................................................................................22
Switch Cameras On and Off..............................................................................................................22
Digital Pan-Tilt-Zoom Panel...............................................................................................................22
Live Mode Right-Click Context Menus..............................................................................................24
Print or Save Live Video Frames.......................................................................................................24
Change Camera Order.......................................................................................................................25
Delete a Camera................................................................................................................................25
Live Mode Hot Key Assignments ..........................................................................................................26
Playback View ........................................................................................................................................27
Review Stored Video Segments........................................................................................................27
Play Video with Onscreen Controls...................................................................................................30
Use Keyboard Playback Controls......................................................................................................30
When the Camera Records Events...................................................................................................31
Playback Mode Right-Click Context Menu Options .........................................................................31
Protect a Recorded Video Segment .................................................................................................32
Unprotect Video Segment .................................................................................................................32

iii

WiLife User Guide
Protect and Upload Video Segments ...............................................................................................32
Check Online Storage........................................................................................................................33
Print or Save Recorded Video...........................................................................................................34
Deleting a Video Clip .........................................................................................................................34
Send E-mail........................................................................................................................................34
Properties Dialog Window .................................................................................................................35
Online Viewing .......................................................................................................................................36
Use Online Viewing ............................................................................................................................36
Running in Background Mode ..............................................................................................................36
Switching between Background and Active Screen Modes............................................................36
Exiting Command Center.......................................................................................................................38

WILIFE PLATINUM FEATURES ........................................................................................................... 39
Online Connection Monitoring ..............................................................................................................40
Online Video Storage.............................................................................................................................42
Online Video Sharing .............................................................................................................................43
Online Search & Playback.................................................................................................................44
Purchasing WiLife Platinum ..................................................................................................................46

SETTING SYSTEM OPTIONS .............................................................................................................. 48
Overview of Command Center Settings ...............................................................................................48
Command Center Setup Tabs...........................................................................................................48
Camera Tab Options..............................................................................................................................49
Launch the Camera Setup Dialog ....................................................................................................49
Delete a Camera................................................................................................................................50
Recording Tab Options ..........................................................................................................................50
Learn About Motion Detection..........................................................................................................50
Review the Recording Dialog ............................................................................................................51
Manage Motion Detection Zones .....................................................................................................51
Set Motion Detection Sensitivity ......................................................................................................52
Schedule Recording Time .................................................................................................................52
Manage Disk Usage ..........................................................................................................................53
Change Video Storage Options.........................................................................................................53
Alerts Tab Option ...................................................................................................................................54
E-mail and Cell Phone Alerts Setup..................................................................................................55
Outgoing E-Mail Server Settings .......................................................................................................55
Add E-mail Addresses........................................................................................................................56
Create Cell Phone Alerts ...................................................................................................................56
Remove E-mail Addresses ................................................................................................................57
E-mail Recorded Video ......................................................................................................................57
Desktop Notifications........................................................................................................................58
Setting Desktop Notifications ...........................................................................................................59
Online Viewing Setup.............................................................................................................................60
Verify System Requirements.............................................................................................................60
Remote Viewing Using Cell Phones & Handhelds ...........................................................................60
Online Dialog Screen Options ...........................................................................................................62
Online Connection Section Descriptions..........................................................................................63
Create Your WiLife Online Account...................................................................................................64
Disconnecting WiLife Online Viewing ...............................................................................................67
Connecting WiLife Online Viewing ....................................................................................................67
Advanced Options..................................................................................................................................68
Review the Advanced Options Dialog...............................................................................................68

iv

WiLife User Guide
Find My Cameras...............................................................................................................................69
Rediscover Cameras .........................................................................................................................72
Set or Change Your Password ..........................................................................................................72
Set Password System & Feature Locks ...........................................................................................72
Check for Software Updates .............................................................................................................74
Update Camera Firmware .................................................................................................................74
Rebuild Video Segment List..............................................................................................................75
Find Orphan Clips ..............................................................................................................................76
System Information ...........................................................................................................................77
Diagnostics Summary Report ...........................................................................................................78

SCHEDULING ALERTS & RECORDING EVENTS ..................................................................................... 79
Scheduling Alerts Overview...................................................................................................................79
Recording and Alerts Schedule Screen Overview ...........................................................................79
Opening the WiLife Recording and Alerts Schedule Screen ...........................................................81
Schedule Event Properties Screen Overview...................................................................................81
No-Show Alerts ..................................................................................................................................82
Set Manual Alert Properties..............................................................................................................83
Arm Event Early Properties ...............................................................................................................83
Camera Alert Properties....................................................................................................................84
Create a Continuous Recording Event .............................................................................................85
Create An Event To Turn Off Recording............................................................................................86
Modifying a Recording or Alert Event ...............................................................................................86
Deleting a Recording or Alert Event .................................................................................................87

USING ONLINE VIEWING .................................................................................................................. 88
How Do I Access My WiLife Online Account? .......................................................................................89
Viewing Video in Direct vs. Relayed Mode ...........................................................................................89
Online Viewing From a PC .....................................................................................................................90
Logging into Your WiLife Online Account .........................................................................................90
Using the My Cameras Page.............................................................................................................91
View the Video for One Camera........................................................................................................91
View the Video for All Cameras In One Image .................................................................................92
View the Video for Your Cameras Using the Cycle Feature.............................................................92
Managing Your WiLife Online Account .................................................................................................94
Changing Video Preferences.............................................................................................................94
Changing Your WiLife Online Password ...........................................................................................95
Changing Your WiLife Online Login Name .......................................................................................96
Changing Settings For Personal Preferences ..................................................................................97
Manage WiLife Online Page Overview..................................................................................................98
Removing a Location or a Camera ...................................................................................................99
Viewing Your Cameras Using a Cell Phone or Handheld.............................................................. 100

TROUBLESHOOTING ...................................................................................................................... 102
Installation Problems.......................................................................................................................... 102
Setup Problems .................................................................................................................................. 103
Video Problems................................................................................................................................... 104
Maintenance Problems ...................................................................................................................... 105
Status Lights ....................................................................................................................................... 107

CONFIGURING YOUR FIREWALL ....................................................................................................... 109
Firewall Basics .................................................................................................................................... 109
Internet Filters ................................................................................................................................ 109

v

WiLife User Guide
WiLife Firewall Requirements ........................................................................................................ 109
Microsoft Firewall ............................................................................................................................... 111
Norton Internet Security 2001 - 2005 .............................................................................................. 113
Norton Personal Firewall 2006.......................................................................................................... 115
Validate the Setup.......................................................................................................................... 115
Norton Internet Security 2007........................................................................................................... 116
Norton AntiVirus 2007 ....................................................................................................................... 118
Norton 360.......................................................................................................................................... 120
ZoneAlarm Firewall ............................................................................................................................. 123
McAfee Security Center...................................................................................................................... 125
McAfee Personal Firewall................................................................................................................... 127
BlackICE Firewall ................................................................................................................................ 129
Windows Live OneCare .................................................................................................................. 132
Turning Off Spam Blocking for WiLife E-mails .................................................................................. 134
AOL (AIM)......................................................................................................................................... 134
EarthLink Total Access and Web Mail........................................................................................... 134
EarthLink 5.0 .................................................................................................................................. 134
HotMail............................................................................................................................................ 134
Yahoo Mail ...................................................................................................................................... 135
GMail ............................................................................................................................................... 135
Microsoft Outlook 2003................................................................................................................. 135
Microsoft Outlook Express 6.......................................................................................................... 135
Eudora............................................................................................................................................. 135
Mozilla Thunderbird 1.5................................................................................................................. 135
Opera M2 ........................................................................................................................................ 136

SPECIFICATIONS ........................................................................................................................... 137
System Computer Requirements ...................................................................................................... 137
Online Viewing Requirements............................................................................................................ 137
DVC-810i Indoor Camera ................................................................................................................... 138
DLC-810e Outdoor Camera ............................................................................................................... 139
DLC-810c Spy Camera ....................................................................................................................... 140
Powerline Networking......................................................................................................................... 141
Wall and Ceiling Mount Installation................................................................................................... 142

SOFTWARE LICENSE AND HARDWARE WARRANTY .............................................................................. 143
Command Center Software License.................................................................................................. 143
Limited Product Warranty .................................................................................................................. 145

REGULATORY AND SAFETY ............................................................................................................. 147
Regulatory Information....................................................................................................................... 147
Safety Information .............................................................................................................................. 147
Use with Power Conditioning Equipment ...................................................................................... 150
Powerline Network Limitations ...................................................................................................... 150

vi

1
Welcome to WiLife
Introduction
Thank you for purchasing the WiLife Video Security System or
WiLife Pro System.
As you already know, WiLife® is a robust video monitoring
system for your home or small business allowing you to view live,
streaming video from up to six cameras.
State-of-the-art cameras capture digital-streaming, full-color
video and transmits the live feed to the Command Center
software application, which provides a user interface that is both
user-friendly and powerful.
For the standard WiLife Video Security System, streaming video
is transmitted over the electrical wiring in your home. This
technology is called HomePlug® and it creates a high-speed
network for communicating with each camera without the
complexity of wireless networks and without the need to run
network cables.
WiLife also offers the WiLife Pro Video Security System, which is the world’s first fully-integrated, turnkey
professional digital video security system. This system is perfect for the pre-wired home or small business who
wants a powerful networked video security system. Using WiLife Indoor IP-Cameras and powered Ethernet, the
WiLife Pro system offers the world’s easiest network setup.
There are many great features offered in all WiLife Video Security
systems:
15-minute installation of the entire system.
Monitor and record up to six locations in real-time.
Search for, play back, and manage recorded video events.
Receive e-mail alerts when a camera detects motion.
Set motion detection zones for each camera.
View video over the Internet or on Smart Phones.
The ability to customize camera settings is the highlight of the
WiLife Command Center application. Setup controls allow you to
view and modify settings for cameras, motion detection, video,
system statistics, e-mail, recording schedule, recently recorded video segments, and disk usage.
Moreover, the system's portable viewing architecture; unique capturing, storing, and reporting functionality;
and ability to customize camera settings make it one of the most versatile, usable, and affordable surveillance
systems in the industry today.

1

Welcome to WiLife

User Guide

WiLife Video Security System Applications

Overview of the WiLife Video Security System
WiLife has three primary components: Intelligent Cameras, Powerful Command Center Software, and WiLife
Online Services.
At the center of the Command Center are components to view live camera video; search for, and play back
recorded video; and tools to configure system options. These components, respectively, are Live Mode,
Playback Mode, and Setup.

Basic Concepts
1. EASY SETUP
One of our first design goals was to deliver a system that you could set up in 15-minutes without having to use
special tools, drill holes, run wires, or configure networking equipment. It is important to us that you have a
great experience right out of the box – one that exceeds the capabilities possible even with a professionallyinstalled home video system.
You complete the setup process in three easy steps:
Step 1 – Install the WiLife Command Center (Software)
Step 2 – Connect the USB Receiver, Ethernet HomePlug Bridge, or Powerline Injector (WiLife Pro)
Step 3 – Mount Your Cameras
With these easy steps, you are up and going. Jump to the chapter on Getting Started for more details about the
WiLife setup process.

2

Welcome to WiLife

User Guide

UNDERSTANDING HOMEPLUG TECHNOLOGY
One key to our system is our use of HomePlug technology. HomePlug allows you to turn your existing wiring into
a powerful network capable of delivering rich, live video from around your property to your PC and from there
anywhere you need it. This illustration best describes how HomePlug works to give you a fast and easy setup
and a reliable video security camera network. Click here to view a full-size PDF copy.

3

Welcome to WiLife

User Guide

UNDERSTANDING THE WILIFE PRO NETWORK
WiLife Pro seamlessly integrates WiLife-engineered components of up to six WiLife IP and/or HomePlug Digital
Cameras, WiLife Command Center PC software, and WiLife Online Services, into one turnkey video security
system.

2. POWERFUL CAMERAS
At the heart of each WiLife Camera is an imbedded computer that
actively encodes, adjusts, and manages your video feed – WiLife
Cameras are the smartest surveillance cameras available.
Because our cameras are so powerful, they provide you with rich
features without overwhelming the CPU on your PC.
Some of the one-of-a-kind features available on the WiLife Camera
include:






High-quality video imaging
Digital motion detection
User-definable motion detection zones
Auto-image lighting management
Onboard Windows Media Video encoding

The WiLife Indoor IP-Camera connects to your LAN through the

4

Welcome to WiLife

User Guide

WiLife Power Injector using standard Ethernet cable. On the Ethernet line, the camera both communicates and
receives its power, making it easy to set up. Features include all of those present in the standard WiLife
Camera, and also include DHCP and fixed IP-addressing and WiLife Powered Ethernet.
There are many applicable locations for WiLife Cameras. Consider these scenarios, including suggested system
configurations:
Camera

A new way to look

Camera 1

An Indoor Camera looks out over the driveway, has Auto Brightness
set to “On,” allowing it to automatically adjust to changing light
conditions.

Camera 2

An Outdoor Camera looks out over the backyard, has a defined
Motion Detection Zone set allowing it to capture motion only along
the top of the fence line.

Camera 3

An Indoor Camera monitors the front door and has an e-mail Alert
set, which will send a notification if anyone comes into the house
e.g. when the kids come home from school.

Camera 4

A Spy Camera monitors the computer room where the kids study,
using the PC for research and typing papers.

Setup allows you to configure each camera differently, based on its mission.

3. POWERFUL COMMAND CENTER SOFTWARE
At the center of the WiLife Video Security System is the WiLife
Command Center, the most powerful video security software
available. The WiLife Command Center can manage full-motion
video from six concurrent cameras, providing you with stunning
live views from every camera while simultaneously recording any
motion or scheduled events.
Additionally, the WiLife Command Center uses a powerful Alerts
engine that communicates with your e-mail server to notify up to
ten e-mail addresses or cell phones that a camera has detected
and recorded motion. When the Command Center detects motion
on a specific camera, the Command Center will send out an e-mail
message; and at your option, you can set the Command Center to
attach either a frame from the captured video or the video
segment.
WiLife’s Command Center alerts are excellent news for you, but
perhaps bad news for your sixteen-year-old son who wants to play
around with your new sports car. Your garage camera can send
you an e-mail alert if anyone gets close to the car.
Some of the great features of the WiLife Command Center include:







Monitor up to 6 cameras
Automatic motion-triggered recording
Easy e-mail and cell phone alerts
Intuitive search and playback controls
Fast video publishing and printing
Intelligent disk management

The WiLife Command Center uses a portion of the disk space on your PC to store the video captured by your
cameras. In the default setup, the Command Center only records video when there is motion detected by a
camera or during times when you have set a fixed recording schedule. In either case, the Command Center
stores each video event as a separate clip to your PC’s hard drive. Some of these clips may be only a few

5

Welcome to WiLife

User Guide

seconds long, while others could last hours. As a Setup option, you specify the maximum amount of disk space
allocated to the Command Center for video file storage. Once the WiLife Command Center reaches this limit, it
makes space for new video clips by removing the oldest clips. With the default camera settings, a typical home
system with four cameras will use approximately 2GB of disk space per week.

4. ANYWHERE, ANYTIME ACCESS WITH WILIFE ONLINE SERVICES
The WiLife Command Center, coupled with our WiLife
Online services, delivers a unique Internet services
component that powers the ability for you to view live
video from your cameras over the Internet and on
video-enabled cell phones. At the center of WiLife
Online is the WiLife Remote Viewing Service that
intelligently links you to all of your cameras at each
site where you have installed a WiLife system.
Features include:




Multiple-location management
Password protected access control
Single, multiple, and cycle camera
viewing
• Selectable video quality controls
• Browser and cell phone access
• High-resolution color video
To access the video, you first create a WiLife Online user account at www.wilife.com. This is part of the normal
process of registering your WiLife system. With each new WiLife setup, you register the new site with your
existing account. Then, when you want to check in on your property, simply login to your WiLife Online account
from a Web browser or Windows Mobile cell phone and link to the video feed.

With WiLife Online it is easy to monitor your home, office, cabin, or even grandma's house – anytime, anywhere
– all from your WiLife Online account.
The following chapters describe in detail each component of the WiLife system. Two chapters in this guide
describe in full each of these modules— Chapter 3: Using the WiLife Command Center and Chapter 5: WiLife
Command Center Setups, which introduces you to the Command Center’s Setup dialogs.
We have also provided you with online help, support, and service pages on our website. Either way, we are
committed to your success.
We are glad to share with you our passion for building great video security products. Over the next months and
years, you can expect to see additional cameras, services, and software targeted at giving you a whole new way
to look.
Welcome to WiLife.

6

Welcome to WiLife

User Guide

System Components
WILIFE RETAIL CAMERAS
WiLife Cameras are the smartest cameras on the market. At their core is a 400MHz processor. Using the
processor, they automatically adjust the video picture for changing light conditions (auto-brightness), detect
motion, and encode video using Windows Media 9 Video file format.
When WiLife cameras detect motion, they record the event and save it to the WiLife Video folder.
The WiLife Command Center supports up to six cameras.

INDOOR CAMERA
The Indoor Camera is our most flexible surveillance camera because of its 3
versatile mounting options that make for easy monitoring for nearly every location.
It is our top selling product.
The camera lens sits on a bubble, which you can move to change its viewing angle.
Additionally, you can adjust the focus by gently turning the lens clockwise or
counter-clockwise as necessary. You should find the focus setting works for most
locations.
We designed this Indoor Camera for indoor use. However, we specifically designed
it to peer out of a window to monitor the out-of-doors using the included suction
cup, which you can mount to the front or the back of the camera. Indoor cameras can also sit on top a desktop,
bookshelf, wall, or ceiling using the Desktop Mount or Wall Mount.
Indoor IP-Camera
Used with the WiLife Pro Video Security System, the Indoor IP-Camera connects to your LAN network through
the WiLife Power Injector using standard Ethernet cable. On the Ethernet line, the camera communicates and
receives its power, making it easy to set up. Just like the standard Indoor Camera, the IP-Camera is driven by a
400 Mhz processor, powering the same incredible features and also DHCP and fixed IP-addressing and WiLife
Powered Ethernet.

OUTDOOR CAMERA
The Outdoor Camera is another option used with the WiLife Video Security
system. Like the Indoor Camera, the Outdoor Camera uses the Command
Center software and is compatible with other existing WiLife Cameras. It is
unique, however, from other WiLife Cameras because it is weatherproof.
The Outdoor Camera provides the same basic benefits of all WiLife Cameras
including easy installation, plug-and-play, HomePlug, and a wide range of
configuration options for homes and small businesses.
The Outdoor Camera is perfect for applications where you need a
weatherproof camera. The Outdoor Camera can withstand water and
temperature extremes while providing superior video surveillance. The Outdoor camera is weatherproof, so it
provides you coverage of outdoor locations, such as the parking lot, driveway, front or back entrance and
backyard.
Note: When mounting, install in a nearby electrical outlet that is easily accessible.

7

Welcome to WiLife

User Guide

SPY CAMERA
The Spy Camera delivers the power of professional-grade video security in a
package that is easy to set up and affordable. The Spy Camera
masquerades as a sleek, fully functioning digital clock, and is perfect for
coverage of any area of the home or small business that requires discreet
observance.
The Spy Camera can be placed anywhere on a flat surface that has an
unobstructed field of view. It looks natural wherever you place it - nighttable, dresser, shelf, desk, countertop, etc.
The Spy Camera provides the same basic benefits of all WiLife Cameras,
including easy installation, plug-and-play, HomePlug, and a wide range of
configuration options for homes and small businesses.
You'll have a powerful security camera that will go undetected by everyone. Perfect for monitoring and
recording your employees, kids, the nanny or the babysitter.

CAMERA POWER SUPPLY
Component of the WiLife Indoor Master System.
The power supply connects to the camera using the provided CAT 5e cable. It serves two
functions.
First, the power supply provides power for the camera. Second, it is the network bridge
connecting the digital video feed from the camera to the PC that is running the WiLife
Command Center.
There are a few rules you should know about using this unit.
1) Do not plug the power supply unit into a surge suppressor, a UPS, or some other
filtering unit. It can be plugged into a regular extension cord or non-surge power strip.
2) Likewise, do not connect the power supply unit or the WiLife camera into other Ethernet or PowerOver-Ethernet (POE) hardware. The WiLife Camera and the Camera power supply operate as a pair.
3) The camera will not operate with non-WiLife POE equipment.
4) The unit is designed to be used indoors.

WILIFE ETHERNET HOMEPLUG BRIDGE
Component of WiLife Pro kits.
The WiLife Ethernet HomePlug Bridge allows you to connect your standard WiLife cameras
(Indoor, Outdoor, or Spy) to the WiLife Command Center over the already existing LAN
network.
The WiLife Ethernet Powerline Bridge is plugged into an outlet close to the router. Then,
take the CAT5e cable supplied with the powerline bridge (or another CAT5e cable) and plug
one end into the powerline bridge and the other to the router or switch.
Note: If you are planning on using your own hand-built CAT5e cable, validate the cable
connections are sound by using a professional cable tester. (Warning: Mis-connected
cables may cause damage to either your cameras or network equipment.)
The WiLife Ethernet Powerline Bridge is perfect for larger homes or small businesses that already have a
functioning LAN network.
The WiLife Ethernet Powerline Bridge can be used with any WiLife Retail or WiLife Pro system.

8

Welcome to WiLife

User Guide

CAT 5E CABLE
FOR STANDARD WILIFE RETAIL KITS
The CAT 5e Cable carries DC power from the Camera Power Supply to the camera and provides the network
connection for digital data communications to and from the camera. The cable supplied with the WiLife Indoor
Camera packages was specifically selected because it was small, flexible, and unobtrusive, in comparison to a
typical CAT 5e cable.
Note: You can find longer CAT 5e cable cables in our online store at www.wilife.com.

FOR WILIFE PRO KITS
The CAT5e Cable carries DC power from the WiLife power injector (single-port or six-port) to the camera and
also allows for the digital data communications over the LAN to the WiLife Command Center.
Note: You can find longer CAT 5e cable cables in our online store at www.wilife.com.

PATCH CABLES
Component of WiLife Pro kits.
The patch cables provided with all WiLife Pro packages allow you to easily connect the IP-cameras plugged into
the power injector to the router.

RECEIVER
Component of the WiLife Retail Master System kits.
The Receiver module provides the interface between the PC and the power line data link. It
communicates with the PC via the USB. The PC sends commands to the cameras to configure
and control them. It receives status from these units, as well as the compressed video streams.
The receiver is not powered by the plug.

USB CABLE
Component of the WiLife Retail Master System kits.
The USB connects the Receiver to your PC allowing the network to communicate with the Command Center
application. It transfers configuration commands to the cameras and receives compressed video streams from
them. Communication with the PC is accomplished using a standard USB 1.1 or 2.0 interface.

CAMERA SUCTION CUP
Component of the WiLife Indoor Master System.
Use the large suction cup to hang the Indoor camera on a window. The suction cup connects
to the back or front of the camera. If you screw the suction cup onto the back, the camera's
lens points into the house. If you screw the suction cup onto the front of the camera, the
camera's lens can be directed to monitor a zone outside of the house.

DESKTOP MOUNT BASE
Component of the WiLife Indoor Master System.
The Desktop Mount Base included in the installation kit is used to place the Indoor camera
on a flat surface such as on a windowsill, bookshelf, or any other place that is flat and
stable.

9

Welcome to WiLife

User Guide

WALL MOUNT
Component of both the WiLife Retail kits and WiLife Pro kits.
Using a few screws, the Wall Mount allows you to hang the camera from a wall, ceiling, or
other surface to watch a room from a discrete location.

WiLife Kit Accessories
NIGHTVISION UPGRADE KITS
Component for both the WiLife Retail and WiLife Pro Indoor Camera kits.
The Indoor NightVision 20 and 50 illuminator kits consist of an illuminator and an
80° Day/Night filter lens that can be used with the WiLife Camera to capture
quality video in low-light areas or complete darkness inside your home or small
business. Both IR Illuminators automatically turn on in the dark. The light they
produce is not visible to the human eye, but can be seen by the camera.
Remember to verify that the illuminator and camera are in alignment (pointed at
the same scene). This is easily checked by repositioning the illuminator in darkness
while viewing the image on the PC.

ACCESSORY LENSES
Component for both the WiLife Retail and WiLife Pro Indoor Camera kits.
WiLife offers optional camera lenses for your Pro Indoor Camera −the 54Ëšlens that has a
smaller field of view, allowing the camera to view objects in the distance with more clarity;
and the 120Ëšlens that is useful for increasing the viewing area for items close to your
camera.
All of our lenses are easy to install into your standard WiLife Indoor Camera and the WiLife
Indoor IP- Camera. All Indoor Cameras come with an 80Ëšlens installed.

10

Welcome to WiLife

User Guide

User Guide Chapters
We designed this manual to be the ultimate resource for learning, understanding, and using the multi-faceted
features within the Command Center application to meet your personal or small business expectations.
The content of the User Guide is laid out into five chapters, the first of which you have nearly completed. Here
is a brief description of the remaining chapters:
Chapters

Descriptions

Getting Started

This chapter provides comprehensive installation instructions for the Command
Center software and the WiLife Cameras.

Using the
Command
Center
Application

Complete description of the great features behind the Live and Playback mode
screens. Additionally, this chapter includes “how to” instructions to assist you
in learning the system more easily.

WiLife Platinum

This chapter introduces you to all of the platinum features that expand your
already powerful system with innovative PC and Online features. Platinum gives
you more control and flexibility to protect your property, family, and employees,
providing you the ultimate in video security. Available features include:

Digital Pan-Tilt-Zoom
Scheduled Alerts
No-Motion Detected Alerts
Desktop Notifications

Online Search & Playback
Online Connection Monitoring
Online Video Sharing
Password System Lock

Setting
Application
Options

This chapter introduces you to the Setup and its comprehensive set of
configuration options. Here you will learn how to setup:

Scheduling
Alerts &
Recording
Events

This chapter describes the screens and options that help you create various
alerts and recording events – no motion alerts, alerts for specific times,
cameras, or dates; and continuous recording or no-recording events.

Using Online
Viewing

Learn how to configure and use your WiLife Online Account.

Troubleshooting

We do not expect you will have any trouble. However, if you do have a problem,
you can find many useful solutions in this chapter.

Configuring Your
Firewall

Most PC firewalls automatically prompt you to allow Command Center to access
the network. Nevertheless, if you find any problems this chapter walks you
thorough both automatic and manual configuration options.

Appendices

Finally, we include a few appendix chapters that cover other topics like: System
Specifications; Software License and Hardware Warranty; and Safety and
Regulatory









cameras
motion detection
video capture

alerts
remote viewing
and other options

The Command Center Help System
Click on the [?] icon in the upper-right corner of Command Center in order to access the online Help System.
The Help System allows you to view topics by clicking through a table of contents, by searching for them using
the Search option, or by locating them via a comprehensive Index.

11

2

User Guide

Getting Started
Overview
The WiLife Command Center is very easy to deploy because of an installation process that we designed to be
user-friendly. Depending on how comfortable you feel installing the application, you can choose to use the
QuickStart instructions (found in the Installation Kit) or the comprehensive installation instructions provided in
this chapter.
Once Command Center has been setup, all you need to do is plug in the cameras and you are on your way to
using your security system. The Command Center application automatically discovers all the cameras
throughout the home and displays the live video stream.
Installing Command Center in three easy steps:
1) Install Command Center Software
2) Complete First Run Wizard
3) Place your WiLife Camera(s)
It is that simple – 1, 2, 3 and you are done.
The following illustrations show how the WiLife Video Security System is an easy 15-minute-setup no matter
which camera you are installing:

7

Getting Started

User Guide

System Requirements
Below you can find the minimum and recommended requirements for systems running cameras using the
default QVGA (320 x 240) settings. Running your cameras in the higher VGA (640 x 480) mode requires
additional CPU.
Number of Cameras

Requirement
1

2

3

4

5

6

2.2 GHz

2.4 GHz

2.6 GHz

2.8 GHz

3.0 GHz

3.2 GHz

Memory (MB) **

512

512

512

768

1024

1024

Video Card (MB)

32

32

64

128

128

256

CPU Speed*

Display Resolution:
Hard Drive (MB):

1024 x 768 or higher, 32 bit color
150 MB for program and a minimum of 10 GB for video recording

Operating System:

USB:
Media Player:

Microsoft® Windows® Vista;
Microsoft® Windows® XP Home Edition,
XP Professional, or XP Media Center Edition
One available USB 1.1 or 2.0 port (2.0 recommended)
Microsoft® Windows® Media Player 9 or later

* Intel® Pentium 4 CPU speed. Dual-core and AMD processors deliver similar performance at lower clock
speeds.
** Microsoft Vista requires more memory to deliver equal performance.

8

Getting Started

User Guide

Starter Kit Contents
Before you begin the installation process, please review the contents of the kit to verify that all of the
components necessary for a successful install are inside. If any of these listed items are not in the kit, please
contact WiLife Customer Support for assistance.

INDOOR STARTER KIT
Command Center
Installation CD
Quick Start Guide
USB Receiver

USB Cable (6 ft.)
WiLife Indoor Camera
Camera Power Supply

Cat5 Cable (8 ft.)
Camera Suction Cup
Cable Suction Cup

Desktop Mount
Wall Mount
Window Decals

OUTDOOR STARTER KIT CONTENTS
Command Center
Installation CD
Quick Start Guide
USB Receiver

USB Cable (8 ft.)
WiLife Outdoor Camera
Power cord/plug

Cable Clamps
Post, Overhang, Wall Mount
Window Decals

SPY STARTER KIT CONTENTS
Command Center
Installation CD
Quick Start Guide
USB Receiver

USB Cable (8 ft.)
WiLife Spy Camera
Power cord/plug
Window Decals

Installation Procedures
The following procedures assume that you verified that all of the components of the installation kit are
accounted for and that your PC and operating system meet the system requirements described above.

Step 1 - Run the Install Wizard
Insert the Command Center PC Software CD into your PC’s CD-ROM drive. The WiLife setup menu will
automatically start.
Note: If the Install Wizard does not automatically load, you can manually start the wizard by double-clicking on
the setup.exe file on the CD-ROM (i.e. D:).
Click “Install Command Center Software.”

9

User Guide

A. WELCOME TO THE INSTALL WIZARD
The Command Center install is ready to start. Simply click the Next>
button to begin.

A. IF NECESSARY, COMMAND CENTER WILL GUIDE YOU THROUGH THE
INSTALLATION OF MICROSOFT .NET FRAMEWORK
The Microsoft .NET Framework is a collection of tools used by many
software programs. Some computers already have Microsoft's .NET Frame
installed as part of other applications. For those that do not yet have .NET
installed, we will install it now.
The first screen you will see in the Microsoft .NET Framework Wizard is its
license agreement screen, as shown in this graphic.
Complete the License Agreement by clicking on the “I agree” radio button,
followed by the Install button.
The system downloads .NET Framework in preparation for the installation
process. A status bar displays the progress of the .NET Framework install. The install will take several minutes.
When the .NET Framework download is complete, you will need to click the OK button to continue with the
WiLife Install wizard.

B. COMPLETING THE COMMAND CENTER INSTALL WIZARD
Follow the on-screen instructions of the Command Center Install wizard.
Click the Next> button to advance through the installation process.
One of the early steps is the WiLife License Agreement screen.
Please take a moment to review the license agreement. If you accept the
terms of the agreement, click the “I accept the terms in the license
agreement” radio button and then click Next>.
If you do not agree with the terms of the agreement, click the “I do not
accept the terms in the license agreement” radio button and the installation
will be terminated.
Note: A copy of the license agreement can be found in two places: 1) In this user guide; and 2) on the program
CD. The filename is License.htm.
You will also have the opportunity to change the destination folder of the Command Center System. The
default location is C:\Program Files\WiLife.

Step 2 – Complete the WiLife Setup Wizard
A few seconds after you start Command Center for the first time, the WiLife
Setup Wizard will open. The WiLife Setup Wizard will help you set up the
following:
Set disk usage options
Create a remote viewing account
Test your system configuration
Connect the USB adapter and camera(s)
Name your camera(s)

10

Getting Started

User Guide

Click Next> to begin the Setup Wizard.

SET DISK USAGE OPTIONS SCREEN
The Set Disk Usage options window allows you to set two things:
1. Location for video storage.
2. The amount of disk space allocated for Command Center video storage.
The screen lists and shows you how much Free and Used space is on your
PC. If your PC already has WiLife video files stored on it, the amount saved
will display in the “Existing Command Center Video” field.
The Setup Wizard automatically sets the Command Center Video Allocation
at an amount that is 20% of the total free space, or to the amount of the
existing WiLife video files, whichever is greater.
You can adjust the setting by moving the status bar above “Adjust Command Center Disk Allocation.”
When you have finished setting disk allocation, click Next>.

SET UP WILIFE ONLINE ACCOUNT
This screen allows you to enable remote viewing on Internet-connected
machines.
What is remote viewing? It is the ability to access live video from your
cameras from anywhere in the world using a Windows® Media enabled
Internet browser or cell phone.
The default option on this screen is to create a new remote viewing account.
If you want to create a new account, simply click Next>.
If you already have an account and want to use the existing account to view
the cameras on this new network, click the radio button for “Use existing
remote viewing account” and click Next>.
To skip this option, click “Do this later.”
To read more about remotely viewing online, see Chapter 6.

USE EXISTING WILIFE ONLINE ACCOUNT
This screen allows you to specify the account information to be able to log in
and view the cameras on your WiLife Command Center online, using your
WiLife Online account.
Simply enter in your email account name (i.e. [email protected]) and
password in the Account to Use fields. Then specify the name you want this
WiLife Command Center to be known as when you log into your WiLife
Online Account.
Click Next> to continue.

11

Getting Started

User Guide

TELL US ABOUT YOUR SYSTEM
This screen allows you to specify the number of cameras you are putting on
the system during this install and how they are connected to the computer,
i.e. via a WiLife USB Adapter, Other HomePlug Powerline Adapter, or NonPowerline LAN.
(Typically, the answer to this last question is the WiLife USB adapter.)
Click Next> to continue.

PLUG IN YOUR POWERLINE ADAPTER
Now, you are ready to plug in the USB Receiver.
Plug the USB Receiver Module directly into a wall outlet near your PC.
Use the included USB Cable to connect the USB Receiver Module to one of
the available USB ports on your PC.
Click the Next> button when you are done.
Note: The USB Receiver Module has built in surge protection and must be
plugged directly into your wall outlet. It is highly recommended that you do
not plug the USB Receiver Module into a surge protected power strip.
Plugging the USB Receiver Module into a surge protected power strip may reduce the quality and performance
of the WiLife system.

STEP 3 — PLUG IN YOUR CAMERA
With the receiver plugged into your electrical outlet, you are ready to plug in
your cameras.
1) Start by installing your cameras in a location near your PC. This
makes it easier to adjust the focus if necessary. Once you have
focused your camera, select a new location for the camera and use
one of the convenient mounting options to place your camera on a
desktop, window, or wall.
Installation Note: If mounting the camera on a window, clean the area of the window where the
suction cup will be attached. Let the area dry completely before mounting camera.
The Window Mount Suction Cup has been tested and proven to hold the weight of objects heavier than
the camera for extended periods of time. To ensure long term connection, however, you can spread a
very small drop of vegetable or olive oil on the under-side of the cup before applying it to the window.
This increases the suction power of the cup.
CAUTION: The camera should be mounted indoors or in a weatherproof enclosure. Additionally, for the
Outdoor Camera, mount the camera high and at an angle so the front of the camera tilts down,
allowing the sun-shield to shade the sensor. This will provide the best quality picture.
Plug the Camera Power Supply into a nearby outlet. Then, use the included Camera Cable (8 ft. Standard
Ethernet Cable) to connect the power supply to the camera.
Note: The Camera Power Supply has built in surge protection and must be plugged directly into your
wall outlet. Plugging the Camera Power Supply into a surge protected power strip may reduce the
quality and performance of the WiLife system.
Click the Next> button to proceed.

12

Getting Started

User Guide

NAME YOUR CAMERAS
Simply name your cameras by clicking inside the text field under each video
panel and entering the desired name. Suggestions for names might be:
Garage, Entryway, Foyer, Kitchen, Storage Area, Front Door, Porch, Family
Area, etc.
Click Next> to continue.

Firewall Setup
It is very likely that you have one of many Firewall applications running on your computer. These applications
protect your computer from unwanted network connections, which sometimes are the result of viruses.
Because Command Center creates a new network using your home wiring and uses your Internet connection
for e-mail and remote viewing, you will need to configure your firewall to allow these connections.
The Setup Wizard will attempt to configure the Microsoft Windows
firewall used on your system.
If needed, we have provided an entire chapter titled Configuring your
PC Firewall that you can use as an aid.
The most common symptoms of firewalls blocking Command Center
are the inability to discover your cameras or the inability to
successfully connect with WiLife Online for remote viewing.
Most firewalls will prompt you to Allow or Block access to the
network by Command Center. You should always choose Allow when
the program reads “Command Center.”
ATTENTION: If you are using Norton Firewall or Norton Internet Security, you must review the Norton Internet
Security by Symantec section of the chapter Configuring your PC Firewall. Simply accepting the automated
prompts may be insufficient.
If you are running Windows XP Service Pack 2, the Windows Security Alert screen may appear. Click on
the Unblock button to allow Command Center to run properly. (A sample screen shot of the Windows
Security Alert displays below.)
If McAfee Personal Firewall Plus or Standard is running on your Windows XP, a warning message is
going to display as Command Center starts. This message is going to inform you that Command Center
wants access to the Internet. You need to click "Grant Access" in order for Command Center to run
properly. (A sample screen shot of this McAfee Firewall message displays below.)
If you are using other anti-virus or firewall software, similar warning messages may appear, asking you
whether you want to allow Command Center to perform certain functions. You should allow the
requested permissions so that Command Center runs properly.
If you find you are having problems, reference the chapter on Configuring your PC Firewall.

13

Getting Started

User Guide

Windows Firewall Auto-Alert

McAfee Auto-Alert Message

Additional Cameras
You can have up to six WiLife Cameras for each WiLife site. Currently, WiLife offers a suite of three intelligent
digital video security cameras —Indoor, Outdoor, and Spy. But check our website periodically for news
regarding any new cameras being released.
Adding new cameras to your WiLife Video Security network is easy.

STEP 1 – POSITION YOUR CAMERA
We make it easy for you to place your cameras anywhere in the home or office. Each starter and add-on kit,
especially the Indoor camera, includes multiple mounting options—a suction cup, desktop stand, and wall
mount.
Use the highly durable suction cup to mount the Indoor Camera to a window. Options on the WiLife
Camera allow you to mount the camera so that it either points outside or in. Our cameras are built
with GlareShield, an anti-glare filter. It greatly reduces the glare cast from a window’s reflections.
Use the desktop stand to place your camera on any flat surface, such as a table, desk, counter,
cabinet, or shelf.
Use the wall mount to fasten the camera high on the wall or even the ceiling.
We also offer t-bar accessory mounts for easily mounting a camera from a false ceiling.

Indoor Camera Instructions
a. Select a location for your Indoor camera.
Use one of the convenient mounting options to secure your camera to a desktop, window, or wall.
Note: If mounting the camera on a window, clean the area of the window where the suction cup will be
attached. Let the area dry completely before mounting the camera.
The Window Mount Suction Cup has been tested and proven to hold the weight of objects heavier than
the camera for extended periods of time. To increase the suction power of the cup, spread a small
drop of vegetable or olive oil on the underside of the cup before applying it to the window.
Instructions for mounting a WiLife Camera on a wall or ceiling are located in the Accessories box in the
Indoor Starter Kit and Easy Add-on Camera Kit.
b. Plug the Camera Power Supply into a nearby outlet.

14

Getting Started

User Guide

Use the included Camera Cable (8 ft. standard Ethernet cable) to connect the power supply to the
camera.
Note: The Camera Power Supply has built-in surge protection and must be plugged directly into your
wall outlet. Plugging the Camera Power Supply into a surge-protected power strip may reduce the
quality and performance of the WiLife system.

Outdoor Camera Instructions
a. Select a location for the camera.
The starter and add-on kit for the Outdoor Camera includes a mounting device that allows you to place
your Outdoor camera on top of a post or hang your camera from a wall, ceiling or overhang.
b. Plug the camera into a nearby outlet.

Spy Camera Instructions
a. Select a location for the camera.
The Spy Camera can be placed anywhere on a flat surface that has an unobstructed field of view. It
looks natural wherever you place it – on a night-table, dresser, shelf, desk, counter top, etc.
b. Plug the camera into a nearby outlet.

STEP 2 – IDENTIFY THE NEW CAMERA IN COMMAND CENTER
There are two choices of setup paths – a and b. So, read both before moving on with the procedure:

a. You did NOT set a custom password
If you have NOT set a custom camera password, then you do not need to do anything more. Command
Center will automatically recognize the camera within 1-2 minutes.
Once the camera appears, you can change its configuration, set a name, or adjust the picture options.
(See the chapter on Setting System Options for information on these settings.)

b. You did set a custom password
If you HAVE set a custom camera password, you need to complete a few additional tasks. This is
necessary because new cameras are shipped with no password (different from the custom password
you have set). Therefore, Command Center will not automatically identify it.
Follow these instructions to include the new camera into your Command Center system:
1) Go to the Command Center > Setup > Advanced dialog screen.
2) Click the FIND MY CAMERAS button.
3) Follow the instructions in the Find My Cameras Wizard.
Note 1: We recommend that you set a custom password because a custom camera password
provides you with security from others having access to your streaming video.
Note 2: If you receive a camera from a friend or as a used item, it may have a password stored on its
power supply. This will prevent you from linking with the camera. To remove the password, power up
the Indoor camera and wait until the camera’s top two green status lights are flashing. Then with the
end of the paper clip, gently press the reset button hidden below the reset hole near the Ethernet
cable plug.
After the camera resets, it will have no password. If necessary, you may need to repeat the steps
above to connect the Indoor camera.

15

Getting Started

User Guide

For the Outdoor Camera, take the paper clip and gently press the reset button hidden below the reset
hole on the bottom right side of the camera’s shell (near the back). You will need to use a long paper
clip to be able to reach the reset button.
For the Spy Camera, take the paper clip and gently press the reset button hidden below the reset
hole, located on the back-top of the camera.

Indoor Camera Focus and Aim
The factory default settings for the WiLife Indoor Camera work great for most applications. However, if you find
you need to adjust the focus of the Indoor camera, it only takes a few minutes. It is easiest to focus and adjust
the camera from an outlet near your computer. The WiLife Indoor Camera has two
components that allow you to adjust the camera’s viewpoint and focus: the camera
eyeball and the lens.
On the back panel, you will notice an adjustable eyeball. Use this ball to change the
angle of the Indoor camera’s lens.
To adjust the focus, gently adjust the lens clockwise or counterclockwise as necessary.
You may find it easiest to take your camera back to your PC to do this work – saving you
the trouble of walking back and forth. The following graphic illustrates how to gently
twist the camera to adjust the focus.
CAUTION: The lens should screw on easily. If it is not screwing easily, DO NOT FORCE IT. This will strip the threads of the
lens holder. Carefully unscrew the lens (counter-clockwise) and adjust the angle of the lens until it screws on easily – it will
feel as though the threads “click” into place. Then begin your clockwise rotation to screw the lens in place. If the lens
doesn’t go in easily, remove the lens and try again.

Switching Lenses on the Indoor Camera
WiLife offers optional camera lenses for your Indoor Camera — the 54Ëšlens that has a smaller field of view,
allowing the camera to view objects in the distance with more clarity; and the 120Ëš lens that is useful for
increasing the viewing area for items close to your camera.
All of our lenses are easy to install into your Indoor Camera. Follow these steps.
1) Unscrew the current lens counter-clockwise and remove it from your Camera.
Note: We recommend you place this lens in a secure place where the exposed optical surfaces won’t get
scratched.

2) Take the new lens from its packaging and gently screw it clockwise into the camera.

16

Getting Started

User Guide

HINT: Position the lens straight so that it is well-seated on the lens holder before you begin to screw it in. This
will allow it to screw easily and straight. If needed, slightly screw the lens backwards (counter-clockwise) at
first so that the threads match up.

Product Support
If you have any questions about the installation procedures, please check out the Support section of our
website for the most recent information. If you still need help, contact Technical Support via our web form at
http://wilife.custhelp.com/cgi-bin/wilife.cfg/php/enduser/std_alp.php or by phone at 888-GOWILIFE (888469-4543). For customers within the United States and Canada.

Tip of the Day
The WiLife Command Center displays a Tip of the Day
dialog window. This dialog displays each time
Command Center is started.
By default, the "Show tips at startup" is checked. You
can un-check this box so that the tips dialog window
won't display every time WiLife is restarted.
To show the Tips of the Day dialog while you are using
WiLife Command Center, right-click on the Help button
(?) in the Title Bar Controls — upper-right corner of the
Command Center system. In the list of options, click on
Tips of the Day.
There are currently approximately 30 tips that you can cycle through.

17

3

Using the Command Center Application

WiLife User Guide

Using the Command Center
Overview
The WiLife Command Center provides a powerful-but-simple interface for managing cameras, recording video,
tracking alerts, and configuring remote viewing. Once you learn a few of the basic elements, most operations
are easy and intuitive.

TWO OPERATING MODES: FULL OPERATION AND BACKGROUND
The Command Center application has two operating modes: Full Operation and Background. In Full Operation
Mode, Command Center provides you with a complete Windows interface, making it easy to monitor and
manage your video feeds.
In Background Mode, Command Center closes its Windows interface and displays a small icon in the system
tray. While running in Background Mode, Command Center continues to record video on motion, using very
little CPU. This allows you to use all of your normal applications, even on a minimally-configured machine.
Background Mode is another great feature of the WiLife system.

TWO MAIN VIEWS: LIVE AND PLAYBACK
The Command Center Windows interface has two main
views: Live and Playback. The Live View allows you to
monitor and manage the live camera feeds. The Search
View allows you to find, view, and manage recorded
video segments.
The title bar and the main feature buttons SETUP, GO
TO LIVE VIEW/GO TO PLAYBACK, and WILIFE appear in
both the Live and Search Views.

Some Application Features
Live View

Playback View

View live video

Play video clips

Arm e-mail alerts

Protect segments

Turn cameras on/off

Print images

E-mail a current image

Upload Video Clips

Digital Pan, Tilt, Zoom

Check Online Storage

Title Bar Controls
The Command Center Title Bar in the upper-right corner of the application lets you view Help, maximize into full
screen mode, minimize Command Center, or run Command Center in Background Mode.
Open Command Center
Help; Display Tips of the
Day; Access WiLife web
support.
Minimize to Taskbar

Show Video Display Panel
in Full Screen Mode.
Close – Run in
Background

When you click the X button, Command Center changes to Background Mode. A system message will let you
know that Command Center is still running and recording in the background.

SHOWING VIDEO DISPLAY IN FULL-SCREEN MODE
You can now maximize the Video Display Panel so that it displays in Full Screen Mode. To set into Full Screen
mode, simply click on the “Maximize” icon
located with the other Title Bar Controls.

18

Using Command Center Applications
The Maximize icon is active from both the
Live Screen and Playback Screen. (If you
activate Full Screen mode while on the
Playback Screen, however, there are not
any playback controls. The Playback
Controls are only available in standardsized viewing mode.)

User Guide

FULL-SCREEN MODE HOTKEYS
F11

Toggle between full-screen mode and
normal mode.

Esc, Spacebar,
or Enter

Return to normal mode.

FULL-SCREEN MODE FEATURES
While in Full-Screen Mode, enjoy these following features:
Drag/drop re-arrange video windows.
Right-click on the video windows and change camera settings.
Double-click on a video to switch between full-screen mode and normal mode.
Press the keys Alt + Tab to go to another app window. The video windows will be in the background.

Hiding Command Center Screen Controls
Press the keys Shift + F11 to toggle between "hide controls" and normal mode. Hide/Show Command Center
controls: Main Feature buttons, Digital PTZ, Clock, and Camera Activity Panel.

Main Feature Buttons
These three buttons control some of the key functions of the
Command Center application. The Setup button opens the Setup
Control Panel where you control all of the configuration options.
The Search/Live button switches between the Search View and
the Live View. (Notice that in Live View, the middle button reads
GO TO PLAYBACK, and when in PLAYBACK View, the middle
button reads GO TO LIVE – thus allowing you to easily switch back and forth.) The WILIFE button takes you to
the WiLife website, where you can login to your WiLife Online account. (See the Command Center Setup
chapter to learn more about camera and program configuration options.)

19

Using the Command Center

User Guide

Live View
The Live View is the first screen that appears when you open Command Center. From here, you can monitor
live video feeds, change screen layouts, and enable and disable cameras and e-mail alerts. This is a screen
shot of the Live View, showing the components of the screen.

Live Video Windows
Command Center can display between 1 and 6 video windows depending on your choice of Viewing Modes.
Each video window in the Live View displays live feeds from your cameras. The text in each video window
shows the camera order (C1-C6), camera name, and camera status. If the camera is recording, the status
message reads (Live/Rec) in place of just (Live).

Choose a Multiple-Camera View
Command Center allows you to select between 3 viewing modes: singlecamera, quad-camera, and six-camera. Video feeds are tiled and sized to fit in the available display area.
Quickly switch between multi- and single-camera views by clicking on the video window.

Alerts Scheduler Front Control Panel
Use the Alerts Scheduler Front Control Panel to quickly arm the next
alert event, immediately arm manual alerts, disable an active alert, or
to access the Recording and Alerts Schedule.
The Alerts Scheduler Front Control Panel is located on both the Live
and Playback screens.
WiLife Icon: System Tray Note: The context menu now includes the
same options that allow you to quickly arm or disarm alerts, both

20

Using Command Center Applications

User Guide

scheduled and manual.
Password Note: If you activate Password System Lock, then you can have the peace of mind that events can't
be armed or disarmed without your password.
Option
Alerts Not Armed

Description
When you first install WiLife Command Center, the Front Control Panel will
display "Alerts Not Armed" until 1) you have set up your email server; 2) you
have scheduled an alert event in Scheduler; and 3) you select "Arm Manual
Alerts Now" or "Arm <name of event> Early."
Note: You do not need to create an alert event to select "Arm Manual Alerts
Now." And, the manual arming of alerts is available with or without the WiLife
Platinum upgrade.

Arm Manual Alerts Now

If you select Arm Manual Alerts Now, then an alert will be sent each time there
is a qualified motion event. This overrides anything you may have set up in
your WiLife Recording and Alerts Scheduler. Once alerts are armed manually,
the Front Control Panel will display "Alerts Manually Armed."
When you select "Arm Manual Alerts Now," you can specify a delay time. This
enables you to get out of the building before alerts are actually armed. Select
a delay time of zero if you want arming to be immediate.

Arm <Name of Event> Early

The Alerts Scheduler Front Control Panel will always display the next scheduled
event in the scheduler's time-line. In the graphical image on this page, the next
scheduled event is called 'Event 6.' You simply click on the Arm Early item in
order to arm it earlier than it was scheduled. Once a scheduled event is armed
early, the Front Control Panel will display "Alerts Armed Via Schedule." As with
manual arming, you can specify a delay time before the event is actually
armed.
This Alert feature is great for quickly enabling email alerts as you leave work
earlier than usual, and want to turn alerts on early.

Disarm Manual (or <name of event>)
Event

If you want to manually turn off all alerts, simply select the "Disarm Manual
Event" or "Disarm <name of event>." Selecting this means that even if you
have qualified motion events, (and scheduled alert events), no alerts will be
sent. In other words, cancel any currently active alert event or turn off the
active manual arming.
Note: This option does not turn off future alerts. It only terminates any alert
(either manual or scheduled) that is currently active.

View Schedule

The View Schedule option opens the Recording and Alerts Schedule Screen,
allowing you to define periods of time when alerts or recording events should
happen. Each scheduled event specifies a start time, end time, days of the
week assignments, camera assignments, and a Schedule event or recording
type.
Note: Command Center does not allow you to create two scheduled events
with overlapping times. Also, creating scheduled alert events is only available
with WiLife Platinum. Creation of scheduled recording events is available with
or without Platinum.

COLOR USES FOR CAMERA CONTROL ACTIVITY PANEL
In conjunction with Scheduled Alert functionality, the Camera Control Activity Panel uses colors to identify their
status. For example, if the circle surrounding the camera's number is red, it means that qualified alerts are
armed and will be sent. If the circle is gray, it means the camera is not detected.
A tool tip will give some information as to why the particular camera is or is not armed. Here are the possible
tool tip messages:
Camera disabled

Alerts manually armed

21

Camera not detected

Using the Command Center

User Guide

Alerts manually disabled

Alerts armed by schedule

Alerts disabled (Email set up
incomplete)

Alerts armed for NO motion

Alerts disabled (action is Do
Nothing)

Alerts armed for NO motion, send
1st alert

Alerts disabled (no active
schedule item)

Use the Camera Activity Panel
The Camera Activity Panel allows you to monitor all your
cameras at a glance. It shows you which cameras are
connected, set for e-mail alerts, and recording. From this panel
you can also quickly turn cameras on and off.
There are right-click menu options available for blue and red colored circles if there is an active scheduled
alert (i.e. the circle is red). In this case, you can right-click and change the alert settings for a particular
camera for the currently-active alert.
Blue circle indicates camera is discovered
but e-mail alerts are disabled.

Red circle indicates camera is discovered
and e-mail alerts are enabled.

Gray circle shows that the camera has not
been discovered.
Green light shows camera is streaming
video.

Gray (no light) Camera is not streaming
video. Camera not recording to disk.

Red light shows Camera is recording.

ON (Black) Camera has been detected for
this camera number in the past but is not
detected now.

ON (Yellow) Camera is ON; click to turn OFF.

Camera has been disabled in Live view. (No
recording will take place.) Click to turn ON.

(BLANK) No camera exists for this number.

Switch Cameras On and Off
At times, you may want to easily turn cameras off. Perhaps you are
having a family party in the backyard and there is no reason to record
all the activity. To turn a camera On and Off, click the On/Off button
below the camera number. When the button reads On – – the
camera is operating normally. When the button reads Off –
– the
camera video feed is disabled until you click the button again.

Click On and Off
On

Off

Digital Pan-Tilt-Zoom Panel
With Digital PTZ, you can narrow in on specific areas of your WiLife cameras viewing area.
For example, zoom in on the cash register and get a close up view. The Digital Pan-Tilt-Zoom (PTZ) section
increases your monitoring capability and scope by allowing you to select a camera from the WiLife Command
Center Live View and digitally reposition the camera so that it pans left or right, tilts up or down, or zooms in on
the scene displaying.
Digital PTZ works within the viewing area of the lens used in the camera. For example, a 120 degree angle lens
has the panning and tilting range of 120 degrees; for an 80 degrees lens, an 80 degree panning radius, etc.
This also means that if you are using the zoom option, you cannot zoom out past the image range of the lens.
A completely zoomed out image for a 120 degree lens would show the full 120 degree image, with no options
to zoom out any further.

22

Using Command Center Applications

User Guide

When you zoom in, you see a subsection of the full image. From this viewpoint, you can pan and tilt to the
edges of the full image represented by the lens in the camera. The camera can zoom in or out of a picture up
to 2x in both VGA and QVGA mode.
Note: In order to use digital pan-tilt-zoom, each camera that participates must be updated with the latest
firmware. If a camera is not updated with the latest firmware, the WiLife Command Center will inform you via
a warning message when you attempt to use the feature. Simply click OK to update the camera. Upon
updating the firmware, your updated cameras will be automatically rediscovered.
The Pan, Tilt, Zoom section is located on the Live View screen. It includes numbered icons that represent each
camera; a replica of the streaming video from the camera selected; up and down tilt buttons; left and right pan
buttons; and increase/decrease zoom buttons.
The following graphic displays the components of the Digital PTZ section and applicable notes regarding how to
use them:

23

Using the Command Center

User Guide

Live Mode Right-Click Context Menus
The WiLife Command Center provides quick access to common functions through context menus on the Video
Windows and Camera Alerts buttons. To access the context menus simply right-click on the object and choose
between the various commands.
The following table describes each of the options:
Option

Description

Camera Settings

Opens the Setup > Camera dialog, allowing you to make quick edits for the
selected camera.

Motion Detection Setup

Opens the Setup > Recording dialog, allowing you to make quick edits for the
selected camera.

Email Setup

Opens the Email and Cell Phone Alerts Setup, allowing you to adjust Outgoing
Mail Server (email account) settings or to add new email and cell phone
addresses as recipients for alerts.

View Recording Schedule

Opens the WiLife Recording and Alerts Schedule calendar, allowing you to
create or edit a scheduled event.

Print Current Frame

Opens the Windows Print dialog, allowing you to select the printer you want to
print the current frame to and to print.

Save Current Frame

Opens the Windows Save File As dialog, allowing you to save the current frame
as a .jpeg, .tiff, .png, or .bmp file, select the location where you want the file
saved (default is WiLife), and rename the file from the default name.

Delete Camera

Removes the camera from the Command Center.

Change Camera Order

Allows you to change the camera number for the camera you right-clicked on.

Print or Save Live Video Frames
Using the Video Window context menu (right-click on one of the windows in the Live mode), you can choose to
print or save the current image displaying in the window.

PRINT A CURRENT FRAME
When you select Print Current Frame, the Command Center uses the Windows print interfaces, which will
automatically try to adjust the picture to match your printer’s capabilities. You may not get great results when
printing to a black and white printer. You find these options only on the live view context menu.

SAVE A CURRENT FRAME
When choosing Save Current Frame, Command Center gives you the ability to save a current frame in four
formats: JPEG, BMP, PNG, and TIFF.
If you select to save the frame in JPEG format, you have the ability
to select the quality setting by entering a quality figure (from 1 to
100%) or manually moving the quality bar, as shown in the
graphic below.
The default name of the file represents the camera name and
date. However, you can change the filename.
Command Center also remembers the last file type you selected,
the directory you saved the last image to, and the quality options
you selected. It will use these as defaults the next time you save
a current frame and let you choose the location and filename for
the image, which it stores as a JPEG.

24

Using Command Center Applications

User Guide

Change Camera Order
In the Live view, Command Center displays each camera’s “feed” in order of the camera’s number. For
example, if the Live view is set to display the feed from four cameras, then the lowest camera number (i.e.,
camera 1) would display in the upper-left corner; camera # 2 would display in the upper-right corner; camera
#3 would display in the lower-left corner; and camera #4 in the lower-right corner.
To change the camera order in Live mode, either in the 4- or 6camera window mode, right-click on the camera viewing panel and
select Change Camera Order. The Change Camera Order screen
displays. In the New Camera Number field, enter the new position
you want for this camera (i.e. 1), as shown in this graphic.
You can manually enter a number (1 to the number of cameras on
the system) or use the increase/decrease arrow buttons to select
the desired number.
The easiest way to change camera numbers is to click-and-drag a
camera’s image on top of another camera’s image. This
automatically changes the camera order.
In the graphic below, camera 2 is being dragged into the window for camera 1.

Delete a Camera
From time-to-time you may remove a camera from your system. Command Center, by default, saves the
settings and position of this camera, expecting that you may add it back to your system. In some cases you
may permanently move a camera to another location. In these cases, you may want to delete the camera from
the Command Center database.
If the camera is still connected, you can use the Live Windows context menu to delete a camera. Follow these
simple instructions:
1) Make sure the camera is not plugged in, to prevent it being rediscovered by Command Center.
2) Select the "Delete Camera" option.
Note: You can delete a camera from the Setup > Camera tab screen. Simply select the camera tab
and then press the Delete button.

25

Using the Command Center

User Guide

Live Mode Hot Key Assignments
To allow you to quickly navigate or activate features on the Live Mode, the Command Center provides keyboard
shortcuts. You will notice some of these features are only available through the keyboard controls.
Hot Key

Description

Hot Key

Description

F1

COMMAND CENTER HELP. Same as
hitting the "?" button.

F5

REFRESH. Refresh all the screens of the
Command Center application.

CTRL-SHIFT
U

UPnP Search. Sends a command to
request that the cameras announce
their presence, to aid in camera
discovery by Command Center.

CTRL-SHIFT
H

HIDE WILIFE. Hides WiLife, and optionally
password locks it.

CTRL-SHIFT
W

DEFAULT WINDOW LOCATIONS Set all
the window positions to their default
positions. (Do this if you can't find one of
the windows.)

CTRL-SHIFT
M

TOGGLE MODE. Alternates between Live and
Playback modes.

CTRL-SHIFT
R

PANIC RECORD. Starts (or adds 30
seconds to) a manual recording of all
active cameras. The countdown of
remaining time is shown in the info
window on the Command Center front
panel.

CTRLSHIFT-ALT
R

TERMINATE MANUAL RECORD.

26

Using Command Center Applications

User Guide

Playback View
Playback View allows you to find, view, and manage your recorded video segments, which Command Center
stores in a database on your computer. Your cameras create these segments according to your settings. By
default, each camera is set to record when motion is sensed. You can also set the camera to record
continuously during specific times or inhibit recording using the Recording Scheduler. (See Recording Options
in the Application Setup chapter for more details.)

Review Stored Video Segments
The Playback Navigation window provides fast access to recorded video segments using the mouse or
keyboard. The Playback Navigation window consists of the following components: Window Timescale,
Date/Time Header, and the navigation window, which displays the camera name and the recorded video
segments captured for each camera. (Video segments will display as alternating light and dark green shaded
bars to better distinguish between video segments recorded consecutively.)

27

Using the Command Center

User Guide

To navigate through the segments, use one of these operations:
Click on the desired date and time
Click and drag the red position line to the left or right, beyond the edge of the window
Click on a date in the calendar
Use Å and Æ to step forward and backward through video segments
See the section on Hot Key Assignments for more keyboard controls.

CHANGE DATE/TIME WINDOW TIMESCALE
To navigate using the Date/Time Header, left-click and drag your mouse on the header area above the timelines. (This is the area with the dates and times.) Drag the time-line left or right and the whole thing moves.
And you can even keep dragging beyond the limits of the time-line if you want
to!
The top of the Search Navigation window displays dates and times for each
time division. These divisions can be easily changed to zoom in to specific minutes of a day or zoom out to view
an entire day.
Change the time focus by clicking on the timeframe guide to select your focus. A tool tip message informs you
of the time division you have selected. Notice the position of the focus indicator (blue ball) in these examples:

4-hour time focus

30-minute time focus

1-minute time focus

5-second time focus

NAVIGATING WITH RED TIMELINE
A vertical red time-line shows the current position of playback. To navigate, click and drag on the time-line to
the left or right until you see the time and date you want to playback. Then release the mouse button.
Notes:
You may also click anywhere on the navigation window and the red time-line will go directly to that
spot.
Use CTRL-SHIFT F and CTRL-SHIFT B to step forward and back through video segments. See Hot Key
Assignments for more keyboard controls.
You can drag the red timeline beyond the left or right edge, and the displayed time window repositions
accordingly.
You should generally stop playback before trying to drag the timeline (left or right) so that the
automatic repositioning of the displayed time window (during playback) doesn’t conflict with your
manual repositioning actions.

SELECT CAMERAS TO REVIEW
When playing video segments, you can select one, several, or all cameras for review. By default, all cameras
are selected. You may wish to de-select one or more cameras if you are not interested in video from those
cameras in your current search. Also, de-selecting cameras can reduce the workload on minimally-configured
machines, thus providing improved performance. Here are a few examples:

All cameras on

Garage camera off, others on

28

Garage camera on, others off

Using Command Center Applications

User Guide

To turn on or off the video for a camera, click the green icon next to the camera name.

SEEING VIDEO SEGMENT FILE DETAILS
Press the Ctrl button or move your mouse over a video segment in the playback navigation window. The
system will display a tool tip that will name the directory the file is saved to; the filename; and the length of the
video segment. The graphic below shows this feature.

QUESTIONS
What do the colored buttons next to the camera names mean?
A green button signifies that the camera is enabled for Playback mode.
A gray button indicates the camera has been disabled for Playback mode. The green and red video
segments will not display.
These are inter-active buttons. You can turn the video for a camera On or Off from. To turn Off the video for a
camera, for example, click the green button next to the camera name.
What do the colored camera names mean?
Yellow camera names represent cameras that are enabled for Playback mode.
Gray camera names represent cameras that have been disabled for Playback mode.
The following graphic shows an example of this feature:

CHANGE REVIEW DATE
The Calendar allows you to more easily go to and look up recorded video clips from a
specific month and specific day. The Calendar works with the Stored Video Segments
window -- once you have selected a month and day, the recorded video clips will
display in that section.
The current day is circled in red. Days in which video segments were recorded appear
bold. You can click on any of those days to display all of the video segments in the time grid. You can also click
on the month or the year to change those viewing options.
The Calendar section uses arrow buttons at the top of the calendar to navigate forward or backward through
the months.

29

Using the Command Center

User Guide

Play Video with Onscreen Controls
Like any DVD player, the Playback Controls allow you to play, pause, adjust speed,
and step-through your video segments. You use the controls by clicking on each one.
If you hold your mouse over the control, Windows will display a tool tip, indicating the
name of the control. Keyboard controls exist to help you review your video.
Use the following list of icons and descriptions to help you understand how to
navigate through recorded video segments.
Button

Description

Button

Description

Click to play video

Click to pause video

Go to the start of the current segment,
or if already at the start, go to the start
of the previous segment

Go to the start of the next video
segment

Step back

Step forward

Video slow motion

Video fast motion

(turn jog dial counter-clockwise)

(turn jog dial clockwise)

Use Keyboard Playback Controls
Command Center has several keyboard shortcuts, which allow you to quickly navigate through video clips.
Some navigation features are only available through the keyboard controls.
Hot Key

Description

Hot Key

Description

CTRL-SHIFT P

TOGGLE PLAY/PAUSE. Toggles
between Play and Pause modes.

-

INCREASE
MAGNIFICATION. Increase time
line magnification (shorter time
span) (also works for - on NumPad)

+

REDUCE MAGNIFICATION. Reduce
time line magnification (longer
time span)(also works for + on
NumPad)

CTRL +

PLAY FASTER. Like rotating the
shuttle control clockwise

CTRL -

PLAY SLOWER. Like rotating the
shuttle control counter-clockwise

CTRL-SHIFT C

CENTER PLAYBACK CURSOR. Sets
timeline origin so cursor is centered

CTRL-SHIFT N

PLAYBACK TIME = "NOW." Set
cursor time to now, and centers
cursor in timeline display

CTRL-SHIFT
1-6

ENABLE/DISABLE CAM 16. Enables or disables specified
camera for playback

CTRL Å, Å,
or CTRL-SHIFT
B

PREVIOUS SEGMENT. Move cursor to
start of next earlier recorded segment

CTRL Æ, Æ,
or CTRL-SHIFT
F

NEXT SEGMENT. Move cursor to start
of next later recorded segment

SHIFT Å

SLIDE CHART EARLIER. Slide time
chart to earlier time (chart moves
right)

SHIFT Æ

SLIDE CHART LATER. Slide time
chart to later time (chart moves
left)

CTRL-SHIFT
Å

JUMP CHART EARLIER. Move timeline
one screen earlier

CTRL-SHIFT
Æ

JUMP CHART LATER. Move timeline one
screen later in time

CTRL-SHIFT S

PAUSE. Causes Pause mode (like
"Stop")

PREVIOUS DAY. Changes playback

NEXT DAY. Changes playback time
PAGE UP

to first file of next day. (These also
work with NumPad PgUp)

PAGE DOWN

30

time to first file of preceding day.
(These also work with NumPad
PgDn)

Using Command Center Applications

User Guide

When the Camera Records Events
When the camera detects motion within the specified zones,
video segments are recorded and saved to the C:\WiLife Video
folder, unless you are running in a pre-WiLife 2.0 version. Then,
recorded video is saved to C:\LukWerks Video.
Of course, if you specified a different storage file location while
completing the WiLife Install Wizard, then the WiLife Video
folder and video files will be stored at that location. (See the
graphic in this section for an example of the video storage
structure for the WiLife Command Center.)
In the graphic, you will notice multiple sub-folders included in
the WiLife Video folder. Each sub-folder represents a camera
that has been installed on the command center. Each camera
installed on the security system is given a unique MAC address.
It is this address that you see listed as the name for each sub-folder.
Video files are then stored under the folder representing the camera they were captured by.
Video files are saved in the standard Windows Media 9 Video file format (.wmv) and can be played using
Command Center’s Playback mode. You can also double-click on a .wmv file to play it using the standard
Windows Media Player.

Playback Mode Right-Click Context Menu Options
While playing through recorded video segments in Playback Mode, you can right-click on an active video
window to access the context menu.
This menu allows you to perform some operations that are not available from any other screen. These choices
include options for managing segments, uploading video segment to WiLife Online account, printing and
saving, and e-mailing.
Each of these operations applies to the current video segment. To manage a different video segment, click on
the segment in the Playback Navigation window.
Option

Description

Protect Video Segment

Protect the video segment you just right-clicked on.

Unprotect Video Segment

Unprotects the protected video clip you just right-clicked on.

Delete Video Segment

Delete the video segment you just right-clicked on.

Protect and Upload Video
Segment

Upload and store important videos recorded by your cameras on your WiLIfe Online account,
located on secure WiLife servers.

Check Online Storage

Opens the Online Storage Space window, allowing you to monitor the amount of storage
space you are using and/or have available on your WiLife Online account. The Online
Storage Space screen also gives you access to view stored videos online and purchase more
online storage.

Print Current Frame

Opens the Windows Print dialog window, allowing you to print the current frame from your
local printer.

Save Current Frame

Opens the Windows Save As dialog window, allowing you to save a current frame in one of
four formats: JPEG, BMP, PNG, and TIFF. Select the location where you want the file saved
(default is WiLife), and rename the file from the default name.

Save Current Segment

Opens the Windows Save As dialog, allowing you to save the current file to another location
on your hard drive or network.

31

Using the Command Center

User Guide

Send Email

Opens the Email Recorded Video screen, allowing you to send the current video frame, the
first portion of the video segment, or the whole segment, along with a written message, to
email recipients you can designate.

Properties

Opens the Video Properties window, allowing you to see the metadata attached to the video
file. Details include the camera number, camera name, bitrate, and whether the file has
been protected, triggered an alert, and was uploaded to your WiLife Online account. You can
also enter your own brief description or upload it to your Platinum WiLife Online storage
account.

Protect a Recorded Video Segment
The Command Center automatically deletes old files as it reaches its disk storage limit. It
does this by deleting the oldest recorded video segments to make room for the new video.
In some cases, you may have a segment that you want to protect for an extended period
of time.
To protect a segment, navigate to the segment so that it is paused in the Playback
window. Next, right-click on the video window to reveal the playback context menu and
choose Protect Video Segment. You can easily identify a protected video segment
because it will show red rather than green in the navigation window. (See
Managing Disk Usage in the chapter on Command Center Options for more
details on disk space usage.)
Note: You can protect a video segment by right-clicking on a green video
segment in the timeline and selecting Protect Video. Also, when two or
more consecutive video segments are protected, the timeline will display
them using two different shades of red, as is shown here.

Unprotect Video Segment
Command Center makes it easy for you to unprotect a protected video segment. To accomplish this, navigate
to the protected video segment in the Playback window. When the video segment is displaying in the video
window, right-click on the image representing the video clip and choose Unprotect Video Segment. The video
segment will now display in the navigation window like other unprotected video clips, colored green.

Protect and Upload Video Segments
Store important videos recorded by your cameras on secure WiLife servers on the web. In fact, call it your very
own WiLife video vault!
Command Center makes uploading video segments to your WiLife Online account easy. Literally right-click on
the video file you want to upload and select “Protect and Upload Video Segments.” That’s it! Your video file is
transferred to a safe and secure WiLife server.
Once uploaded video segments are on your WiLife Online account, you can play them from anywhere in the
world, at any time; and share them with friends, family, and even local law enforcement, if needed.
The following graphic is an example of the uploading process screen that displays each time you protect and
upload a video clip.

32

Using Command Center Applications

User Guide

Check Online Storage
Use the Check Online Storage option to monitor the amount
of storage space you are using and/or have available on
your WiLife Online account. The Online Storage Space
screen also gives you access to view stored videos online
and purchase more online storage.
To open the Online Storage Space screen, simply go to the
Playback screen, right-click on any video clip, and choose
the option “Check Online Storage.” On the right side of the
screen, a pie chart will compare the space already used up
with video clips (displayed in blue) with the space still
available. The left side of the screen displays the exact
amounts (in megabytes) of space — total amount of account
storage space (100 MB), total used (8.13 MB), and total still
available (91.8 MB), as illustrated in the graphic below.

DESCRIPTION OF ACTIVE LINKS & BUTTONS
Upgrade Online Storage

Use this option to purchase more online storage space using
the Get WiLife Service Add-ons page. Boost the storage
capability of your WiLife Online account so you can store your
most important video clips online and have them easily
accessible from anywhere in the world and at any time.

View Stored Videos

Use this option to quickly access the Video Storage page on
your WiLife Online account to view the video clips stored there.
Go to Chapter 4 and read the topic “Online Video Storage” for
instructions regarding playing your stored videos.

Close

Close the Online Storage Space screen.

33

Using the Command Center

User Guide

Print or Save Recorded Video
Printing or saving (save as) a video is simple.
1) Navigate to the segment so that it is paused in the playback window.
2) Right-click on the video window to reveal the playback context menu and choose the Print Current
Frame, Save Current Frame, or Save Current Segment option.
3) If printing, you will be asked which printer to use.
4) If saving, you will be asked to specify a location and file name for the frame or segment. If saving the
current frame, you can also specify other image file options, such as the file type, and if appropriate,
the image quality or compression method.

Deleting a Video Clip
To quickly delete a video segment that you do not want to keep in your library, Navigate to the segment so that
it is paused in the playback window.
1) Right-click on the desired video you want to delete. The Playback context menu options display.
2) Click on the "Delete Video Segment" option. The "OK to Delete?" window displays.
Note: If you have selected the Command Center option to require a password to delete video files (using Setup /
Advanced / Manage Security), you will first be asked to provide the password.

3) Click the YES button to delete the video segment.
4) Click NO to close the window without deleting the video segment.
Navigation Timeline Note: You can also right-click on a green or red colored video segment in the
timeline and select the option to delete a protected or saved video segment.
Password Note: Command Center offers password protection for the file deletion function for both
Platinum and non-Platinum users. If password functionality is set, then, when the option to delete a
file is attempted, you must enter a password.

Send E-mail
Note: The Mail Server must be configured on the on the Setup > Alerts > Email & Cell Phone Setup screen
before you can use this feature.
In the Playback mode, right-click on any video
panel and select the option “Send Email” from the
list of options. The E-mail Recorded Video window
displays. This screen allows you to distinguish
what type of e-mail you are sending and to whom
you will send it. These are your options:
Send selected still frame, first 10 seconds
of video, or the entire video segment
Select or enter which e-mail addresses to
send video
Add a comment for the e-mail
The E-mail Recipient(s) section works like the Email Alert list on the E-mail Setup screen, with
Add/Edit/Remove buttons. By default, the E-mail
recipient(s) list displays the addresses entered in
E-mail Alert list, found on the E-mail tab screen of
Setup. If you add and/or modify the list of
addresses in this dialog window, the system

34

Using Command Center Applications

User Guide

remembers it and keeps these addresses for the next time you send video via e-mail.
Note: Adding or deleting a recipient to or from this list does not alter the list of email recipients that has been
set up in the Setup > Email tab screen.

ADDING AN EMAIL ADDRESS
1) Click the ADD… button. The Add Email Recipient screen
displays.
2) Click the E-mail Address radio button.
3) Enter your e-mail address in the available field.
4) Click OK. The e-mail address is added to the list of Email/cell phone addresses.
Note: You can send a video to a cell phone by clicking the
Mobile Phone radio button and entering the cell phone
number in the appropriate text boxes.
If your cell phone provider is not shown in the drop-down
list, you can always enter your full cell phone email
address in the upper section of the form, under Email Address. For example, you could enter
[email protected]’ as the destination email address.

EDITING AN E-MAIL ADDRESS
1) In the E-mail Recipient(s) window, click on the e-mail address you want to modify.
2) Click the Edit… button. The Edit E-mail Recipient window displays, with the address you want to modify
showing in the text field.
3) Modify the address and then click OK. The modified address is added to the list.

REMOVING AN E-MAIL ADDRESS
1) In the E-mail Recipient(s) window, click on the e-mail address you want to delete, so that it is
highlighted.
2) Click the Remove… button. The e-mail address is removed from the list of e-mail recipients.

Properties Dialog Window
When the cameras record video, the video is saved as a Windows Media
Video file (.wmv). WiLife Command Center automatically applies metadata
to each video file in order to make them more self-documenting and
definable from other video clips.
Details written to the video clip include the camera name, bitrate, and
whether the file has been protected, triggered an alert, and was uploaded
to your WiLife Online account.
Though the default title of the video clip is the camera name and the
date/time it was recorded, you have the ability on this screen to enter a
new title and add unique notes about the video clip in the available
Description panel.
Many of these attributes display when the file is opened in the Windows
Media Player.
Note: Many of these metadata flags can be used as search criteria, using
the Online Search and Playback tool.

35

Using the Command Center

User Guide

Online Viewing
With WiLife Online, you can monitor nearly-live video feeds from all of your WiLife Command Center sites over
the Internet to Windows Mobile-enabled cell phones, Internet Browsers, and other devices that support
Windows Media 9 Video. You may have set up this feature when you ran the Setup Wizard. If you did not set it
up at that time, please complete these steps to activate:
1) Connect your Command Center PC to the Internet using a high-speed service like DSL or Cable
Broadband.
2) Go to Setup > Online. Click on the link that says ‘Create a WiLife Online account.’ Then follow the
steps outlined in the WiLife Setup Wizard to create a new WiLife Online account.
3) Setup the Online Viewing options on the Command Center Setup > Online dialog.
Additionally, you can register several sites – your second home, the office, and grandma’s house – with your
account. This allows you to quickly check all of your WiLife installations.
Once you have configured your PC and online account, you are ready to enjoy online viewing. Online viewing
lets you monitor your property from anywhere and at anytime.

Use Online Viewing
When you enable Online Viewing, the WiLife Command Center PC becomes a video server ready to publish
video through the secure WiLife network over the Internet to you, wherever you are. WiLife intelligently creates
the most efficient path through your local routers to your remote device. You connect to your video feed by
going to www.wilife.com and logging into your WiLife Online account – using your username and password (or
PIN for cell phones). Once connected to your account, you select the site and cameras you want to view. The
WiLife server then routes a live video feed to your device. For more information, please go to the chapter
Online Viewing.

Running in Background Mode
As mentioned earlier, Command Center has two operating modes: Full and Background. While running in Full
Mode you have full access to the complete Windows interface.
In Background Mode, Command Center runs silently in the background and displays an icon of the
Indoor Camera in the system tray.

Switching between Background and Active Screen Modes
From the active screen mode, you can also tell Command Center to run in Background Mode using one of two
methods:
1) Click the close box –

– in the upper right-hand corner of the screen

2) Click the Command Center icon in the system tray and choose Hide Command Center
In Background Mode, Command Center continues to record video, but uses
only a small amount of system resources. This allows you to use all of your
normal applications on a minimally-configured machine. Background Mode is
another great feature of the WiLife system.
From Background mode, the simple way to show Command Center is to
double-click on the WiLife icon in the system tray. You can also open the full
user interface by right-clicking on the Command Center icon and choosing the
option Show Command Center (as shown).

36

Using Command Center Applications

User Guide

SYSTEM TRAY RIGHT-CLICK OPTION DESCRIPTIONS
Option

Description

Show Command
Center

Display the WiLife Command Center for use.

Hide Command
Center

If the WiLife Command Center is displayed, this option closes the Command Center
to the system tray. The Command Center is still running in the background.

[Scheduled Alerts
Options]

You can change the current state of the Command Center alerts system from the
right-click options displayed here.
The three right-click menu options in this section will always be the same options
displaying in the Scheduled Alerts section of the Live screen in Command Center.
The options available here and they’re functions solely depend on whether you have
alerts created and whether an alert is currently armed, or whether manual alerts
are currently armed, etc.
For more information regarding these options, see the topic “Alerts Scheduler Front
Control Panel.”

Disable All
Notifications

Enable or disable all notification options.

Mute All Sounds

Enable or disable all sounds.

Exit

Close down the WiLife Command Center.

LED DESCRIPTIONS
Take a look at the WiLife icon in your system tray. The three little LEDs on the left side are dynamic, giving the
user some informative clues as to what WiLife is doing, even if it’s minimized.
Top LED

Middle LED

At least one camera is
streaming video.

You are connected to WiLife
Online, but nobody is viewing.

At least one camera is
recording video.

Some one is viewing Command
Center online.

No cameras are streaming
video.

You are not connected to WiLife
Online.

Bottom LED
This LED is always on as it
signifies that WiLife is “On.”

ICON TOOL TIPS
You can move your mouse over the WiLife icon in the system tray to see details such as
whether any cameras are streaming video, recording, connected to WiLife Online for
remote viewing, or being remotely viewed.
The graphic depicted in this section shows an example of the tool tip.

37

Using the Command Center

User Guide

Exiting Command Center
The WiLife Command Center does not, of course, record when your
computer is not running. If you shutdown your computer while
Command Center is running, you will see a message reminding you that
you are closing Command Center as well.
To exit Command Center, follow these steps:
Click on the Command Center icon in the system tray
Choose Exit from the menu
Remember that clicking the close box – – only closes the Windows interface, and Command Center will
continue to run in Background Mode.
Note: If you have a password assigned to your system, you will need to enter your password before exiting.
The following graphic is an example of this password screen.

Note: If you want to remotely view your cameras online, you MUST HAVE the WiLife Command Center running.

38

4

Using Command Center Applications

User Guide

WiLife Platinum Features
WiLife Platinum expands your already powerful video security system with innovative PC and Online features.
WiLife Platinum allows you to better protect your property, family, and employees by providing you with desktop
notifications, powerful alerts, and increased accessibility to your cameras and recorded video files on the
Internet anywhere in the world, at any time.
Power up with Platinum and increase the monitoring power of your WiLife System Command Center. With
access and power like this, you’ll never go back to monitoring the old fashioned way.
Scheduled Alerts
Use a simple calendar to schedule times to turn
email and cell motion alerts on or off. For
example, arm your system Monday through
Friday at 10:00 PM and disarm at 6:00 AM.

No-Motion Detected Alerts
Intelligently monitor an area where you expect
motion. If there is no motion, the system alerts
you. Now you can be notified immediately
whether the kids come home from school on
time.

Desktop Notifications

Password System Lock

Let WiLife notify you when there is motion on
your cameras with a popup window on your PC.
Notifications display a thumbnail image of the
event and optionally sound an alert tone of your
choice.

Keeps the snooping eyes and tampering fingers
of employees or kids off the entire Command
Center or individual features while you are away.
Lock access using your private system password.

Digital Pan-Tilt-Zoom

Online Connection Monitoring

Scan and zoom within the current viewing area of
your camera. Now you can focus in on the door,
cash register, or other home and business
targets from your WiLife Command Center.

Remotely supervise your system by receiving an
email or cell phone message if your Command
Center, PC, or cameras go offline. Now you can
take action fast.

Online Video Storage

Online Camera Management

Keep your important video safe. Store protected
video clips securely in your online account where
you have the perfect tools to review, organize,
and share.

Control cameras through WiLife Online where you
can remotely adjust options such as resolution,
motion sensitivity, and even arm/disarm alerts.

Online Search & Playback

Online Video Sharing

Go beyond live Internet viewing. Access your
recorded video at anytime, anywhere. Use easy
search tools to locate and view video by date,
time, and site - with up to the minute availability.

Share select video clips with friends, family,
employees and even local law enforcement.
Simply upload the segment and list the email
addresses for nearly instant distribution.

Whenever you attempt to use a Platinum-specific feature, the WiLife Command Center is going to display a
popup message that educates you about the Platinum feature you selected to use and displays a link where
you can get more information about Platinum and subscribe.

39

Using the Command Center

User Guide

Whenever you attempt to use a Platinum-specific
feature, the WiLife Command Center is going to
display a popup message that educates you
about the Platinum feature you selected to use
and displays a link where you can get more
information about Platinum and subscribe.
Upgrading to WiLife Platinum is easy. Simply log
in to your WiLife Online account, follow the link
to Upgrade Subscriptions, and sign up for WiLife
Platinum. Once you finish, the new features are
immediately enabled without the need to
download software or enter complex license
keys.

This chapter highlights the Platinum features found at WiLife Online.

Online Connection Monitoring
Online Connection Monitoring gives you the power to supervise your WiLife
Command Center remotely by receiving email and mobile phone messages
whenever your WiLife Command Center or cameras go offline or online.
With this feature, you can:
Have your own personal security supervisor.
Be informed of command center status via connection messages.
Get a jump start on a potential camera or site issue.
Know immediately when and why a camera or a site goes offline.

HOW IT WORKS….
1) Log in to your WiLife Online Account.
2) Click on the Connection Monitoring tab.
3) Create an E-mail or Mobile Phone alert, specifying which device
you want to be alerted when it goes offline or online – the WiLife
Command Center or a camera(s).
Note: Your ability to create alert notifications is nearly limitless. The feature allows you to create
as many alert recipients as you want. The screen lists all of the e-mail and mobile phone
recipient alert records you create.
4) Edit or delete alert recipient records.
The following graphic illustrates the functions capable with the Connection Monitoring Platinum feature:

40

Using Command Center Applications

User Guide

41

Using the Command Center

User Guide

Online Video Storage
Have you wanted an easily accessible, secure storage
facility on the Internet for your most important video
files? WiLife has made it possible! Online video
storage. Easy accessibility. Secure storage server.
Plus, uploading video files is faster than counting to
three. Literally right-click on the video file you want to
upload and select “Protect and upload.” That’s it! Your
video file is safe and secure in your very own WiLife
video vault!
Online Video Storage allows you to:
Store important videos recorded by your cameras on WiLife servers.
Play stored files from anywhere in the world, at any time.
Share selected video clips with friends, family, and even local law enforcement.
Manage the stored video files remotely.

HOW IT WORKS…..
1) From the Playback screen in your WiLife Command Center, right-click on a valuable video file and
select “Protect and Upload Video Segment.” The file is then uploaded to your online video storage
account.
2) From your WiLife Online account, remotely view all of your uploaded video files on the Storage page.
3) Click the Play icon for the desired video clip to view the whole clip.
4) Click the Share icon for the desired video clip to send it via email.
5) Delete video clips by checking the desired video clips and then clicking the Delete button.
This graphic illustrates the functions available on the Storage page.

42

Using Command Center Applications

User Guide

Online Video Sharing
WiLife Platinum gives you the ability to share video files you’ve stored
online with friends, family, employees, and even local law
enforcement. We call it Online Video Sharing and it’s so easy to do!
Online Video Sharing allows you immediate access and ability to:
Share fun videos!
Help substantiate or refute a claim.
Help solve a crime.
Create your very own security-minded community with
friends, neighbors, co-workers, etc.

HOW IT WORKS….
1) Whenever you find a must-see-and-share video on the
Storage tab, simply click on the Share button for the desired
video file.
2) Enter the e-mail addresses of the parties you want to see the
video.
3) Type an introduction for the video (up to 200 characters
long).
4) Click Send.

43

Using the Command Center

User Guide

Online Search & Playback
Go beyond live Internet viewing. You can now search for and play
video clips from your WiLife Command Center online! Thanks to
WiLife Platinum.
Access your recorded video from a site anywhere and at
any time.
Using a user-friendly search tool and numerous search
criteria options, find video by date, time, site, or
camera.
Create and save custom searches.
Play full video clips.
You can remotely view the video clips at any one of your WiLife
Command Center sites using the Online Search and Playback
page on your WiLife Online Account.
The Online Search and Playback page allows you to browse through video clips or complete a more advanced
search. The page is simple enough to use that you can wade through video until you find something interesting
to watch as you move forward or backward along the timeline of recorded video clips on each Command
Center site. The Search options are robust enough that you can locate videos of a particular interest based on
criteria you specify on a whim or using a previously saved search or quick search. It's perfect for situations
where you have a pretty good idea of what you are looking for.
Complete a quick search. The Search and Playback feature uses "smart" search functionality, allowing you to
not only save and store multiple custom searches, but change them as well. Add more search criteria to saved
searches. In fact, add flags or highlights regarding what is interesting about the video clip (unusually large size,
unusually long duration, and video on either side of such a hit).
Search using criteria based upon the start date/time & end date/time of the video clip; the length of motion;
video "rank"; whether an alert was triggered; protected clips; file size; duration of video clip; Command Center
site; and specific cameras.
Regarding searching for videos, you can search using a Quick Search or an Advanced Search.
Quick Search Options

Advanced Search Options

- Today's videos

- Start Date/Time

- This Weeks Videos

- End Date/Time

- High Motion Videos
- Larger Videos

- Amount of Motion (below
average, average, above average,
top 20%)

- Longer Videos

- Size

- Alerted Video

- Duration
- Alerted
- Protected

SEARCH FUNCTION NOTES:
The search results automatically include surrounding video clips that were recorded right before and
after the video clip resulting from the search, regardless of search results. This is true for the
camera(s) involved in the search.
You can save a search for future use. (If you save a search, you will be required to give the search a
name.)
An Automatic Update property exists so WiLife Online updates the list of video clips from your
Command Center. Choose between 5, 10, or 30 minutes, etc. updates.

44

Using Command Center Applications

User Guide

SEARCH RESULTS
Video search results can be displayed using two display modes -- text-grid view (default), which includes a
header and can be sorted by each column; or by thumbnail tile view, which includes details of the video when
you mouse-over the thumbnail. You can switch views without performing a second search.
Options available for search results displayed in
text-grid view include:

Options available for search results displayed in
thumbnail view include:

- Check box to allow multiple video clip selection.

- Thumbnail of each video (large size).

- Play button to play a single file.

- Page rankings.

- Play checked files.

- "More" icon on list retrieves text display with the duration,
size, "rank," amount of motion, date/time, alerted and
protected.

- "More" icon on list retrieves thumbnail, title,
description, or other available information about the
recording.
- "Nearby/Related Recordings" allows you to get the
next 5 and previous 5 videos (within 5 minutes),
temporarily (same camera), spatially (all/selected
cameras) or both.

- "Nearby/Related Recordings" allows you to get the next 5
and previous 5 videos (within 5 minutes), temporarily (same
camera), spatially (all/selected cameras) or both.

45

Using the Command Center

User Guide

Purchasing WiLife Platinum
To purchase WiLife Platinum:
1) Click on the “Get WiLife Platinum Now! Click Here!” button in the left panel. (This
button is accessible from any screen on your WiLife Online Account pages.) The Buy
WiLife Services page displays.
Note: You can also access the purchase page buy clicking on the “Purchase Now!” link from the Connection
Monitoring, Online Storage, or Remote Playback pages; or by clicking the “Purchase Now!” link displaying at
the end of each Platinum Feature description on your My Account page.
2) In the Choose Subscription dropdown field, select the WiLife Service you want to purchase (i.e. WiLife
Platinum). If you have more than one site, they will all be listed in the Choose Subscription section and a
dropdown field will exist for each site.

Once you choose your subscription service, the details of the purchase are printed to the cart, as shown below.
Details about the subscription purchase include: the name of the service item (WiLife Platinum), cost, renewal
date, number of Platinum upgrades, and amount of additional storage space.

3) Click “Continue to Add-ons.”
4) The Buy WiLife Services Add-ons page allows you to purchase additional storage space, upwards of 500 MB,
2 GB, or 10 GB. To purchase an add-on, click on the “Add to Cart” link representing the desired option.
For this exercise, let’s add an additional 500 MB of storage space to our order. Notice that the Cart is updated
to show the add-on, new total, and new storage amount:

46

Using Command Center Applications

User Guide

Other Cart Options
Click the Change link to change the Subscription option.
Click the Remove link to remove the Add-on item.
5) Click “Go to Billing Information” to continue.
6) Complete all of the required Payment and Billing Information fields and then click “Continue with Order.”
7) The cart now displays your billing information, displaying an Edit link that allows you to edit the information,
if you find it inaccurate.

8) Click “Complete Purchase.” A printable version of your order displays on the screen. Click “View printable
version” icon to view and print your order.
9) Click the “Return to WiLife Online” button to return to your My Cameras page.

47

5
Setting System Options
The default configuration of your WiLife Command Center provides you with all of the basic features activated
so that you have a fully-functioning video security system running in minutes. However, the Command Center
lets you change the settings to enable additional features like e-mail alerts, desktop notifications, and online
viewing. You can also upgrade to WiLife Platinum.
You find these options in the Command Center’s Setup dialog, by clicking the SETUP button from the Live or
Playback screens.

Overview of Command Center Settings
Using Setup is simple and intuitive. Simply click on the SETUP button on the main window. You find this
button next to the GO TO LIVE or GO TO PLAYBACK button. Additionally, you can right-click on one of the video
windows and choose one of the options we display. That too will take you into Setup.
Setup is like any other tabbed dialog in modern Windows applications. It consists of a title bar and various
tabs that show feature-specific fields and buttons, allowing you to set and modify camera and system settings.
Additionally, you may view information and statistics regarding the cameras, network, and system.

Command Center Setup Tabs
Setup is divided into five tabs— Camera, Recording, E-mail, Remote, and Advanced. To further introduce you to
these tabs, here is a table that describes each one:
Tab Screens

Descriptions

Camera

View and edit camera properties such as brightness and contrast for the selected
camera. Here you can perform these and other operations:
• Changing camera names
• Adjusting video quality attributes
• Deleting cameras
• Changing the camera display order

Recording

Manage camera motion detection, define fixed recording schedules, and control
and monitor disk allocation and usage.
• Set motion detection sensitivity
• Create and modify motion detection zones
• Schedule specific recording times
• View disk usage

Alerts

Setup and edit e-mail account information, define e-mail and cell phone recipients,
and activate desktop notifications for each camera.

Online

Enable Online Viewing and enter your WiLife Online user account information.

Advanced

Add a new camera to the system, display and edit advanced properties, passwords,
and view system information.
• Add a new camera to the system or get help finding undiscovered cameras
• Change your system password
• Update system software and firmware

48

Setting System Options

User Guide

Camera Tab Options
Use the Setup Camera dialog to view and modify properties for each camera— e.g. define a name, flip the
display orientation, and adjust the image quality. You will find the default image settings work for most
conditions. However, adjusting these options when conditions require is easy and straightforward.

Launch the Camera Setup Dialog
From the main Command Center screen click the SETUP button and choose the Camera tab to modify the
camera settings:
Dialog

Item

Usage

Camera
Buttons

Click the camera buttons 1-6 to select the
camera you wish to adjust.

Camera
Name

Set the name to display on the video screen
and setup camera button.

Text Color

Click to change the color of the text shown on
the video image.

Text Location

Click one of 9 positions within the box to set
the screen location for the name.

Auto
Brightness

Check to allow camera to automatically adjust
image brightness and contrast with changing
conditions.

Brightness
+/-

Slide the bubble toward + to brighten and
toward the – to darken the image.

Contrast +/-

Slide the bubble toward the + or – to adjust
image contrast.

Flip Image

Check to flip image vertically when camera is
mounted upside down.

Mirror Image

Check to flip image horizontally like a mirror.

Advanced
Options

Set advanced options for the camera. (See
the “Advanced Options” topic below for
details.)

Camera
Information

View the Powerline adapter network settings
and Powerline networking conditions for your
cameras.

Delete
Camera

Click button to remove the selected camera
from the list of active cameras in Command
Center. However, it does not delete any stored
video clips.

ADVANCED OPTIONS
The advanced camera options allow you to change camera resolution, frame rate, and other options. We
expect that you will rarely need to change these settings. Command Center writes these advanced options to
the WiLife Camera for processing. Thus, when changing Advanced Options, remember to click the Apply button.
The most common advanced option to adjust is Resolution, increasing it to 640 x 480. At the higher resolution
you get a sharper image, but remember that to use this setting with live viewing, you will need a machine that
matches or exceeds our Recommended Computer specifications. Using an underpowered PC with either higher
resolution or higher bit rates may result in video that appears jerky. With some power outlet locations (for the
camera), the higher resolution and bitrate settings may not work fully so some experimentation is sometimes
required.

49

Setting System Options

User Guide

Here is a brief review of these options:
Option

Description

Resolution

The Resolution dropdown option allows you to set VGA or QVGA resolution. By
default, your cameras are set at QVGA (320 x 240) resolution and 15 frames
per second (fps). You can experiment with your camera resolution and frame
rate to produce the ideal results given the capabilities of your PC. Choosing
higher a resolution requires a faster CPU and Video Card to smoothly render
live and stored video to the screen.

Frame rate

The Frame Rate option allows you to choose video capture speeds between 15
fps (frames per second) and 5 fps. Choosing a higher frame rate requires a
faster CPU and Video Card to smoothly render live and stored video to the
screen.

Bit rate

The Bit Rate option allows you to specify the speed at which the picture is
transferred. Higher bitrate means bigger file size and generally better video
quality while lower bitrate means lower file size but worse video quality.

Camera order

Change the order in which this camera displays in the Setup program and on
the live video feed.

Enable Motion LED

Check this box to enable the front red LED on the camera. When activated, the
red LED will blink when the camera senses motion.

Delete a Camera
Setup > Camera > Camera # > DELETE CAMERA button.
When you unplug a camera from your system, the Command Center retains the settings of the camera
(password, name, position, etc.), allowing you to move your camera to other needed locations around your
home or office. In all, the Command Center anticipates that you will return the camera to the system. If you are
permanently removing a camera from the system, you can free the camera position by deleting the camera
using the Delete Camera command.
Here are the steps:
1) Open the Setup program.
2) Click on the Camera tab.
3) Click on the camera button for the camera you want to delete.
4) Click on the DELETE CAMERA button and click the YES button to confirm delete choice.
Note: Deleting a camera will remove all of your local camera configuration options. However, it does
not delete any of the stored video clips recorded by that camera.

Recording Tab Options
The Setup > Recording tab allows you to manage the recording of live video from your cameras to your PC hard
drive. It allows you to manage motion detection, schedule recording times, and manage disk usage.

Learn About Motion Detection
By default, each camera automatically records video any time it detects any motion. Recording only motion has
the advantage of saving disk space. WiLife Cameras also allow you to change from “entire image” motion
detection, to individually defined zones. These smart cameras have the capability of detecting motion in up to
16 regions – which we call motion zones. This is useful if you want to eliminate detection along the road and
limit it to the parking lot only. Motion detection works by comparing the difference between consecutive frames
of video and calculating if any scene changes have been detected.

50

Setting System Options

User Guide

Each time the camera detects motion it alerts the Command Center software and records the event and a few
prior frames. Once motion is detected, the system records uninterrupted until 5-seconds after the motions
stops. This could create seconds or minutes of compressed video.

Review the Recording Dialog
From the main Command Center screen click the SETUP button and choose the Recording tab to modify your
recording and disk usage settings:
Dialog

Item

Usage

Camera
Buttons

Click the camera button 1-6 to select the camera
you wish to adjust.

Detection
Sensitivity

Slide the bubble toward the [–] to reduce or
toward the [+] to increase the motion sensitivity
for the selected camera.

Display of
Zones

Check to see zones on the live view of each
camera during motion detection.

Clear All
Zones

Click button to delete all motion detection zones
for the selected camera.

Clear
Selected
Zone

After clicking within one of the detection zone,
click this button to delete the chosen zone. You
can also simply press the Delete key.

Enable
Entire
Image

Click to set the entire image as one complete
zone. (Default)

Schedule
Recording
Time

Click button to open the Recording & Alerts
Schedule Screen to schedule recording times,
armed alerts, or times cameras are to be
disabled.

View Disk
Usage

Click button to review current disk usage or to
change the video storage location.

Manage Motion Detection Zones
SETUP > Recording
When you have the Setup > Recording dialog open, Command Center enters a special mode that allows you to
select and draw motion zones directly on the Live Video image. You must be in Live Mode to access the full
functionality when working with motion zones.
To manage detection zones for a camera, follow these instructions:
1) Click on the Setup button and choose the Recording tab.
Creating and deleting individual zones now is an interaction between the open setup dialog and the
live video window.
a) To create a new zone, hold down your left-mouse button on one corner of the region and drag the
mouse across the screen to the opposite corner of the zone. (If you decide that you do not like the
zone you are creating, you can hit the ESC key before you let go of the mouse.)

51

Setting System Options

User Guide

b) To delete a single zone, left-click anywhere in the zone and then press the Delete key or click the
Clear Selected Zone button.
c)

To delete all zones, click the Clear All Zones button.

d) Finally, to detect motion anywhere on the image, click the Enable Entire Image button.
Note: Remember, you can create up to 16 motion zones per camera.

Set Motion Detection Sensitivity
Setup > Recording > Motion Detection section > Sensitivity Slider.
Use the Sensitivity slider on the Setup > Recording tab to adjust the level of motion sensitivity for each camera.
The setting ranges from 0 to 100 sensitive. 100 is the most sensitivity. You can adjust the sensitivity to meet
your needs. A very low number will tell the camera to only detect the motion of large objects (a person or car). A
high number will increase the sensitivity allowing you to capture the motion of small objects like pets or even a
passing cloud.
In our graphic below, the motion detection sensitivity level is set to 50.

Schedule Recording Time
Setup > Recording > Recording section > SCHEDULE RECORDING TIME.
The Command Center allows you to schedule recording events for each camera. These events have two types:
Set Continuous Recording and Turn Cameras and Recording Off.
During Continuous recording schedules, Command Center records video from the selected camera even when
there is no motion. Turn Cameras and Recording Off schedules disable both Motion and Continuous recording,
although you can still monitor live video.
To activate the Recording Schedule dialog, click the SCHEDULE RECORDING TIME button on the Setup >
Recording tab.
See Chapter 6: Using the Scheduler for more information.

52

Setting System Options

User Guide

Manage Disk Usage
The Command Center Disk Usage dialog allows you to view and change the disk allocation rules. The
adjustable options include the Video Path and Max Allocation. You can also view the free disk space, current
usage, and discard date among other statistics. You open the Command Center Disk Usage dialog by clicking
on the VIEW DISK USAGE button on the Setup > Recording dialog.
This graphic shows a screen shot of the Disk Usage dialog. A description of each field is also included:
Dialog

Item

Usage

Video Path
(adjustable)

The path where Command Center stores video
files. The default value is C:\WiLife Video.

Browse
Button (…)

The browse button allows you to navigate and
pick another video storage directory.

Free Disk
Space

The amount of free space on the drive
Command Center is using to store video files.

Max
Allocation

The max amount of space you allow to
Command Center for storing video files. The
number is in megabytes. The gray calculations
shows the percent of the disk drive allocated
for video storage use.

Current
Usage

Current usage shows the megabytes in
current use for video files. The gray
calculation shows the percent of the
maximum allocated in use.

Discarding
From

Discarding From shows the date of the oldest
file and the one Command Center will delete if
it needs to recycle space to make room for a
new clip.

Command
Center Disk
Usage Per
Camera

Here you can review a detailed list of the
storage and files in use by each camera.

Change Video Storage Options
Setup > Recording > Recording section > VIEW DISK USAGE button.
Command Center allows you to store captured video segments in any directory you wish. Once you have
chosen a directory, Command Center allows you to specify the maximum space you want to allocate for video.
By default, when you choose a path, Command Center will guess at a reasonable maximum disk allocation,
which you can change.
To change the storage directory,
1) From the Setup dialog, click on the Recording tab.
2) Click the VIEW DISK USAGE button.
3) Either enter the path for the video files or click the browse (…) button and navigate to the path.
4) Finally, set the amount of disk space you wish to allocate to video files in this directory.
Note: If you reduce the amount of disk space allocated to video files to a number less than that currently in use,
Command Center will slowly reduce the space used as new recordings are created.

5) Click the APPLY button to apply the changes.

53

Setting System Options

User Guide

Alerts Tab Option
With the WiLife Command Center, you can receive e-mail and cell phone alerts (messages) when a camera
detects motion. You have the option of receiving one of three message types: simple text-only, text and one
frame of video, or a video clip. In any case, this e-mail alert option allows you to know when your cameras are
capturing motion.
You set e-mail alerts on the Command Center Setup > Alerts dialog, which allows you to configure e-mail alerts.
Note: For WiLife Platinum users, when an email alert message is sent to you or an email recipient, that
message includes a link that takes you to your WiLife Online account so you can see the video that triggered
the alert.
The following graphic is a screen shot of the Alerts dialog:
Dialog

Item

Usage

Camera
Buttons

Click the camera button 1-6 to select the
camera for which you are managing alerts.

E-mail & Cell
Phone Setup

Select the type of alert action you want a
camera to send when it detects motion. The
options include—do nothing; send a text
message; or send a frame of the captured
video.

Schedule
Email &
Mobile Alerts

Check to turn on e-mail alerts for the
selected camera. Uncheck to turn the alerts
off.

Set Manual
Alert
Properties

Select the type of alert action you want a
camera to accomplish during an alert event—
do nothing; send a text message; send a
frame of the captured video; or send an
excerpt from the beginning of the video
segment.
Set the minimum length of motion necessary
to trigger an alert, the minimum time
between alerts, or the maximum frequency
you want alerts to be sent.

Desktop
Notifications
(WiLife
Platinum)

54

With WiLife Platinum, activate desktop
notifications that notify you when there is
motion on your cameras. Desktop
notifications display as popups on your PC's
desktop and display a thumbnail image of
the event and play an alert tone.

Setting System Options

User Guide

E-mail and Cell Phone Alerts Setup
SEND ALERTS USING ACCOUNT
Enter the account information for the e-mail server you will use
for sending alert notifications. Information required to enable this
option is your e-mail address, account username, account
password, and outgoing mail server address.
Note: Go to Outgoing Email Server Settings for a list of the more
popular web email service providers that includes the addresses
for each. If you don't find your email service provider listed,
please contact them to get the address for the Outgoing/smtp
mail server.

SEND ALERTS TO SECTION
Enter e-mail and cell phone recipient addresses for those you
want alerts sent.

ADD/EDIT/REMOVE BUTTONS
Use the Add... button to add email and cell phone addresses as
recipients for alert notifications.
Use the Edit... button to edit the email and/or cell phone address selected in the Recipient panel.
Use the Remove button to remove email addresses from the list of e-mails.

TEST ALERTS SECTION
After you have entered the values specifying your local e-mail account information (mail server name, account
name, account password, e-mail address) and added the e-mail addresses in the Send E-mail to list, press the
TEST button to send a test message to each of the addresses.
When you click the TEST button, Command Center shows ‘Sending’ on the button’s face.
If Command Center successfully connects to your server, it displays a message asking you to check your e-mail
to see if a test message arrived successfully. If Command Center was unable to send the test message, it will
provide you with an error message indicating the type of problem.
Note: Sometimes, the process of sending and delivering the test message can take a few minutes, depending
on your e-mail provider.

Outgoing E-Mail Server Settings
In order to have your WiLife Command Center properly relay e-mail alerts and notifications to you and those
addresses you've configured to receive notifications, you need to configure the Outgoing Email Server with the
outgoing mail server address of your email provider (Hotmail, Gmail, Yahoo! Mail or else).
The following table lists the settings you can use to complete the Outgoing Email Server field:
Email Server Provider

Outgoing Email Server Address

Google Gmail

smtp.gmail.com

Yahoo! Mail

smtp.mail.yahoo.com

Hotmail

mx1.hotmail.com

MSN

smtp.email.msn.com

EarthLink

smtpauth.earthlink.net

55

Setting System Options

User Guide
Email Server Provider

Outgoing Email Server Address

Netscape

smtp.isp.netscape.com

Lycos

smtp.mail.lycos.com

Xmission

mail.xmission.com

Comcast.net

smtp.comcast.net

AOL

smtp.aol.com

CompuServe

smtp.compuserve.com

NetZero

smtp.netzero.com

SBC Global

smtpauth.sbcglobal.net

Add E-mail Addresses
Setup > Alerts > Email and Cell Phone Setup.

The WiLife Command Center makes adding email address easy. If
you want a specific email account to be notified when detection
on a camera is captured, follow these simple instructions:
1) Click the SETUP button.
2) Click the Alerts tab.
3) Click on the button "Email and Cell Phone Setup."
4) Click the ADD button. The Add Email Recipient screen
displays.
5) Click the Email Address radio button.
6) Enter the desired email address in the available field.
7) Click OK. The email address is added to the Recipients panel on the Email and Cell Phone Alerts
Setup screen.
Note: You can enter up to 10 email and cell phone addresses.

Create Cell Phone Alerts
Most modern cell phones and cell phone providers support messaging. You can send alerts to your cell phone
just like e-mail messages. The trick is determining the e-mail address for your phone. The typical format for
these e-mail addresses is ##########@yourprovidersaddress.com, where ########## is your cell phone
number. Here are a few examples for different cell phone providers.
Provider

E-mail Address

Cingular

##########@mobile.mycingular.com

Sprint

##########@messaging.sprintpcs.com

T-Mobile

##########@tmomail.net

Nextel

##########@page.nextel.com

Verizon

##########@vtext.com

AT&T

##########@mmode.com

For example, if my cell phone number is (123) 555-7890 and my cell phone provider is Sprint, my alert e-mail
address is [email protected].

56

Setting System Options

User Guide

Because of limits in many cell phone messaging systems, most will not send you video frames or video clips.
To set up the WiLife Command Center to send alerts to your cell phone, follow these easy steps:
1) Click on the SETUP button.
2) Click the Alerts tab.
3) Click on the button "Email and Cell Phone Setup."
4) Click the ADD button. The Edit Email Recipient screen displays.
5) Click the Mobile Phone radio button.
6) Enter the full cell phone number in the available fields.
7) Click the drop down arrow and select the mobile phone provider you use.
8) Click OK. The cell phone number is added to the panel of Email/cell phone addresses.
Note: You can enter up to 10 email and cell phone addresses.

Remove E-mail Addresses
Setup > Alerts > Email and Cell Phone Setup.

To remove an email address from the Recipients list, follow these tasks:
1) Click the SETUP button.
2) Click on the Alerts tab.
3) Click on the button "Email and Cell Phone Setup."
4) In the Recipients panel, highlight the email address or cell phone number you want to remove.
5) Click the REMOVE button. The email address is immediately removed.

E-mail Recorded Video
It will not surprise you that the cameras will capture humorous or entertaining video once in a while. From
WiLife, it is easy to email a clip to a friend.
In Playback mode, you can right-click on a displayed video image, and select “Send Email.”
A dialogue window displays, allowing you to:
Select what you want to send (first frame, first portion of the segment, or the whole segment).
Select who you want to send the email to -- your normal Email Alerts recipients (as before) or to
different email addresses.
Enter a personal message, such as “Hey, check out these doorbell ditchers!”
Note: Before you can use Email functions, you need to configure your email server in the Setup > Alerts tab
screen. Once you have defined an email server, and assigned email addresses, Command Center will send an
alert to the specified email addresses with video is captured.

57

Setting System Options

User Guide

Desktop Notifications
Desktop Notifications allows you to set unique PC alerts that include thumbnails of a video clip, text, and even
a distinguishing sound so that you not only see the notification but you hear it as well.
Desktop notifications display whenever an important WiLife Command Center event occurs such as a camera
was lost/found, a scheduled event was started/stopped, an online viewing session was started/stopped, or
motion was detected by a camera.
Note: You can enable/disable desktop notifications from the WiLife Command Center Software icon in the
system tray.
Desktop notifications are set up on the Advanced > Alerts tab. See Setting Desktop Notifications for details.
Here are three examples of the notifications that will appear on the desktop.
New Camera Discovered

Camera Not Detected

When a camera is discovered by your Command Center, the
notification will display and give you details such as what
type of camera was detected, the firmware version, and its
MAC address.

When a camera is no longer detected by Command Center,
the notification will display and relay the camera's name so
you know exactly which camera to check on.

Motion Detected

When a camera detects motion, the notification will display
and relay the camera's name and display a thumbnail of
the recording as well as the date/time stamp the camera
detected motion.

58

Setting System Options

User Guide

Setting Desktop Notifications
The following graphic shows and describes the fields applicable to desktop notification functionality:

59

Setting System Options

User Guide

Online Viewing Setup
Online Viewing allows you to view live video from your cameras anywhere and at anytime. If you did not set up
Online Viewing during the Setup Wizard, first create a “WiLife Online” account at www.wilife.com/register.
Learn more by reading the chapter Using Online Viewing later in this user guide.

Verify System Requirements
Before beginning the setup, confirm that your system meets our recommended requirements. Unlike a minimal
WiLife setup, remote viewing consumes more resources and requires a high-speed internet connection to
perform well.
MACHINE CONFIGURATION

For remote viewing, confirm that your machine matches or exceeds the recommended configuration.
Number of Cameras

Requirement
1

2

3

4

5

6

2.2 GHz

2.4 GHz

2.6 GHz

298 GHz

3.0 GHz

3.2 GHz

Memory (MB) **

512

512

512

768

1024

1024

Video Card (MB)

32

32

64

128

128

256

CPU Speed*

Display Resolution:
Hard Drive (MB):
Operating System:

USB:

1024 x 768 or higher, 32 bit color
150 MB for program and a minimum of 10 GB for video recording
Microsoft® Windows® Vista;
Microsoft® Windows® XP Home Edition,
XP Professional, or XP Media Center Edition
One available USB 1.1 or 2.0 port (2.0 recommended)

Media Player:

Microsoft® Windows® Media Player 9 or later

* Intel® Pentium 4 CPU speed. Dual-core and AMD processors deliver similar performance at lower clock
speeds.
** Microsoft Vista requires more memory to deliver equal performance.

NETWORK REQUIREMENTS
Requirement
Network Speed

Description
Uplink and downlink speeds of 150kpbs or faster, per installation.
For best results, a full-time broadband connection of 144K or greater.
Lower speeds will work as long as they are broadband.

Connection Type

Always-on broadband connection

Remote Viewing Using Cell Phones & Handhelds
WiLife provides remote viewing using Windows Mobile cell phones, handhelds, and web browsers. The
common requirement for a compatible web browser is support for Windows Media Player 9. The common
requirement for the cell phone is also support for Windows Media 9. Usually you can find these phones
labeled as Windows Mobile or Windows Smartphones.

60

Setting System Options

User Guide

WiLife is compatible with a wide range of Microsoft Windows Mobile cell phones and wireless handhelds. Of
course, these devices require Internet access either through a cell service provider or wireless Internet hub,
depending on your device.
Note: Cell phone users should subscribe to an unlimited data plan to ensure cost effective access.
Examples of Compatible Cell Phones
Anextek SP230

Microsoft/Flextronics "Peabody"

Asus P535, P525, P505

Motorola Q; i930; CN620; MPx, MPx100 & MPx220

Audiovox PPC 6601; PPC 5050, PPC 4100; SMT
5600

Neonode N1

Cingular 8525; 8125; 3125;

02 XDA; XPhone
Orange SPV C600; C550

Dopod StrTrk S300

Palm Treo 700w

E-ten M600; P300B

Pantech PH-S8000T

Gigabyte GSmart

Qool Labs ADA

Gotive H41

Samsung BlackJack; SCH-i730; SCH-i600; SGH-i300

GSMK Cryptophone

Sharp W-Zero3

Hitachi Pocket PC phone

Siemens SX66

HP iPAQ hw6500 series; h6300 series

Sierra Wireless Voq Phone

HTC MteoR; TyTN; Universal; Wizard; Blue Angel;
Typhoon; Amadeus; Magician

Sprint PCS Vision; Power Vision;

iMate SmartFlip; SP5; SP5m; K-JAM; JASJAR

T-Mobile Dash; MDA; SDA
Verizon XV6700

Examples of Wireless Handheld Devices:
Above-Net Top100P

Juniper Systems Archer Field PC

Acer n20 series

Lenovo ET960

Asus MyPal A730W

Mitac Mio A201

Dell Axim X51v; X51; X50v; X50; X30

MP2 Solutions MRT300

HP iPAQ hx2400 series; hx2700 series; hx3700
series; hx4700 series

Olympus "Tough Digital Assistants"
Toshiba e805; e400/e405; e750/e755; e800/e805

i-mate PDA2
Intrinsyc Carbonado;

BROWSER
Common Requirements

Windows Media Player 9 or later

Browsers

Microsoft Internet Explorer Version 6.0 and later (7.0
recommended). Firefox 2.0 and later.

61

Setting System Options

User Guide

Online Dialog Screen Options
Once you have created your WiLife Online account, you are ready to setup individual sites such as the Home,
Office, or Vacation Home. You use the Setup > Online dialog to configure the site options:
Dialog

Item

Usage

Username

Displays the username for your WiLife Online
account. Click the Change link to edit your
account settings.

Location

Displays the name for this location. You can
have many sites attached to your remote
viewing account. Click the Change link to edit
your account settings.

Connect

Only active if this site is disconnected from the
online account. Click to re-connect, allowing
you to have remote access to your camera
images from the Internet and Smart Phone.

Disconnect

Only active if this site is connected. Click to
disconnect.

Online
Status

Displays the status of your online connection
and remote streaming ability. This section has
a link to your WiLife Online Account where you
can view live video from your cameras and use
the features of WiLife Platinum.

WiLife
Platinum

The WiLife Platinum section displays the status
of Platinum and the used/available ratio of
online video storage. Click the View Stored
Videos link to access the videos you've
uploaded to your WiLife Online account.

SCREEN NOTES
In the Online Connection section, notice that the Online Status will display “Connected” when it completes the
link to the online servers. If the connection becomes broken, the Remote Viewing Status line will display a
message, such as “Disconnected—Account Unknown.” In this case, recheck your account info and review the
troubleshooting guide for possible reasons and solutions.
Here are some frequent questions that may be of help:
Will I have to pay to use online viewing?

No. The standard remote viewing functionality is a free
service.

Is there a time limit for viewing video?

It depends on your Internet capability and firewall settings.
WiLife automatically determines how to stream video to you
in the most direct way. If the Command Center cannot find
a direct path, we direct the video feed through WiLife’s
network. We call this “Relayed Mode” and there is a threeminute time limit.
If the Command Center finds a direct path, you are

62

Setting System Options

User Guide
connected via “Direct Mode.” In Direct Mode, there is no
time limit. You can view a video feed for any length of time.
Cell phone viewing is limited to 3 minutes.

There are answers to more questions available in our Knowledge Base/FAQ (http://wilife.custhelp.com/cgibin/wilife.cfg/php/enduser/std_alp.php) and Tips & Tricks
(http://www.wilife.com/Support/TipsAndTricks.aspx)

Online Connection Section Descriptions
Setup > Online tab > Online Connection Section

The Online Connection section of the Online
tab screen allows you to check the status of
your online connection and streaming
video. The following screen shot is an
example of this feature.

ONLINE STATUS INDICATORS
The Online Status field specifies whether or not you’re currently connected to our WiLife servers. For Online
status, there are four primary indicators: Disconnected, Attempting Connection, Connected, and Disconnecting.
Indicators

Descriptions

Disconnected

Command Center is currently disconnected from remote viewing.

Attempted Connection

Command Center is attempting to enable remote viewing.

Connected

Command Center is connected and available for remote viewing.

Disconnecting

Command Center is disconnecting from remote viewing.

There are also indicators that will display in the event of an error. The following table lists these indicators and
describes the meaning of each.
Indicators

Descriptions

Unknown Site

Command Center has attempted to register cameras without first registering the
site.

Account Already Exists

The specified remote viewing account already exists. Please select another
account.

Account Not Verified

This WiLife remote viewing account has not been verified. Please check your email
to verify this account.

Account Unknown

Unknown remote viewing account. Please verify that your email address and
password are correct, and remember that the password is case sensitive.
See Knowledge Base topic WiLife Online Setup for more information.

Data Error

Command Center cannot connect to WiLife at this time. Please try again later. If
this error persists, contact your network administrator. Possible causes include
firewall software, antivirus software, or a virus. Make sure you have installed all
updates and patches and that your firewalls are configured to allow Werks to
access the Internet.
See the Knowledge Base topic WiLife Online Data Error

63

Setting System Options
Communication Error

User Guide
Command Center cannot connect to WiLife at this time. Please try again later. If
this error persists, contact your network administrator. Possible causes include
firewall software, antivirus software, or a virus. Make sure you have installed all
updates and patches and that your firewalls are configured to allow Werks to
access the Internet.
See the Knowledge Base topic WiLife Online Communication Error.

Invalid Serial

The supplied serial number is invalid.

Connection Test Failed

Command Center has failed to establish a direct connection with the backend.

Service Response Camera Not
Registered

One or more of the cameras being updated has not yet been registered

Unknown Error

An unknown error has occurred. Please check your event log and/or contact WiLife.

Service-oriented indicators include Service Response Not Authorized, Service Response Expired, Service
Response No Registered Product, Service Response Disk Full, Service Response Limit Reached, Service
Response Not Implemented, etc.

STREAMING STATUS INDICATORS
The Streaming Status field specifies whether or not someone is actively viewing your cameras.
Indicators

Descriptions

Active - Direct Mode

Someone is actively/currently viewing your live cameras in Direct mode - the
streaming video feed is channeled directly to you because your system’s firewall
settings aren't blocking the stream and the Internet capability is powerful.

Active - Relay Mode

Someone is actively/currently viewing your live cameras in Relay mode - the
streaming video feed is channeled through WiLife’s network to you.

Inactive - No Client

Nobody is actively viewing your live cameras.

Create Your WiLife Online Account
Note: Skip this step if you set up Online Viewing during the Setup Wizard!
Note: To create your online account, you will need Internet access.

1) Click on the Setup button.
Note: To create your online account, you will need Internet access.
2) Click on the Online tab screen.
3) In the WiLife Online Account section, click on the link (Create a WiLife Online account).

64

Setting System Options

User Guide

4) When the WiLIfe Setup Wizard screen displays, validate that the option "Create new remote viewing
account" is selected. Click Next>.

5) Fill out the fields with basic account and site information -- first/last name and location name. Click
Next> to continue.

The next screen in the Wizard requests the details that will help you securely login in and manage your
WiLife Online account. The following table explains each field:
Field Name

Description

E-mail

Your e-mail address doubles as your account name.

Password

We recommend you create a password using at least 7 characters,
one of them being a number. Punctuation characters are allowed.

Confirm Password

Re-enter the password that you entered in the Password field.

Security Question

Create a security question that you can use to unlock your account
should you ever forget your password. For example: “my first dog’s
name.”

Security Answer

Enter the answer to your security question. For example: “Rocky.”

I want to be notified of WiLife software

Leave this checkbox marked to receive e-mail about software or

65

Setting System Options

User Guide

and product updates

camera updates. Remove the checkbox if you don’t wish to receive
any notifications.

I have read and agree to the Terms of
Use and Privacy Policy

Click this checkbox after you have read the Terms of Use page and
Privacy Page. This checkbox must be marked to complete your
registration.

6) When you have completed filling out the form, click Next>.

7) You have completed creating your online account. Click Finish.

Notice that the WiLife Online Account section of the Online tab screen is populated with your account's
username and password:

66

Setting System Options

User Guide

Disconnecting WiLife Online Viewing
Setup > Online Tab > Clicking Disconnect

To disable Online Viewing:
1) Click on the Setup button.
2) Click on the Online tab.
3) Click Disconnect.

Connecting WiLife Online Viewing
Setup > Online Tab > Clicking Connect

1) Enable WiLife by following these steps:
2) Click on the Setup button.
3) Click on the Online tab.
4) Click Connect.

67

Setting System Options

User Guide

Advanced Options
The Advanced dialog includes tools that assist you in maintaining the cameras and the application. These
tools range from changing passwords to checking for software and firmware updates. Tools would be a more
fitting title for the dialog.

Review the Advanced Options Dialog
Here we take a quick peak at the Advance dialog:
Dialog

Item

Usage

Find My
Cameras

This feature allows the application to find any newly
added cameras, even if you have set a password
for your current system.

Rediscover

Rediscover initiates a search for cameras that you
may have lost due to computer or other problems.
This feature can also be used as an alternate way
to "clean out" or delete any cameras that you no
longer have or expect to find.

Manage
Security

Keep the snooping eyes and tampering fingers of
employees or kids off the Command Center by
locking individual features or the whole system
while you are away. Lock access to stored video
files, camera & recording settings,
arming/disarming alerts, digital pan-tilt-zoom, and
more. Your private system password is the key that
locks/unlocks key features.

Check for
Updates

Search our online update service for new releases
of software or camera firmware.

Update
Camera

Update cameras with the most recent firmware
version.

Rebuild
Video List

Rebuild Video List compares the Command Center
Video database with the available video files to
ensure every file is recorded in the database. You
may want to perform this operation if you suspect
the video database is corrupt.

Find Orphan
Clips

This option looks under the currently selected video
path (e.g. the default C:\WiLife Video) for any video
files that are not currently associated with a
camera.

About

Here you can inspect the current version number
for your Command Center installation and review
system information and diagnostics. This is helpful
when contacting support.

System Info

Displays information about the configuration of
your system such as hardware configurations,
computer components, and software, including
signed drivers and unsigned drivers. Quickly find
the information that support technicians need to
resolve a system problem.

Diagnostics

Displays comprehensive configuration and status
details for your WiLife Command Center
application. Also, create a diagnostics report to
send to WiLIfe technical support.

68

Setting System Options

User Guide

Find My Cameras
SETUP > Advanced tab > FIND MY CAMERAS
The Find My Cameras Wizard automatically attempts to find all of the cameras on your network, including any
new cameras you may have just plugged in. What makes the Wizard wonderful is the fact that it also helps
walk you through situations in which Command Center cannot find a camera.
Follow these instructions to include the new camera into your Command Center system:
1) Go to the Command Center > Setup > Advanced dialog screen.
2) Click the FIND MY CAMERAS button. The Wizard displays.
3) Enter the number of cameras you expect the Wizard to find. For these instructions, we want Command
Center to find 2 cameras. In the Connection Method section, tell Command Center how your computer
is connected to your cameras. (This is usually through the WiLife USB Adapter. However, if it is
connected through a different HomePlug powerline interface, or a standard network LAN in your home,
select those options.)

4) Click Next>. The Plug In Your Cameras screen displays.

5) Click Next>. The Wizard tests the configuration of your computer such as the powerline adapter,
operational firewalls, and other network adapters. The following graphic is an example of the main
Wizard screen, in which all tests are run from.

69

Setting System Options

User Guide

6) Click Next > when the test is complete. The Search for Cameras screen displays.

Cameras that have been discovered will display with active LED marks. Un-discovered cameras will
display with gray LEDs.
7) When Command Center has successfully found the number of cameras you told it to look for, it will
display the "Name My Cameras" screen. On this screen, you can enter or edit the name of each
camera. Click Next> when you have finished naming your cameras.

70

Setting System Options

User Guide

8) When you have completed the wizard, the last screen of the Wizard displays. Click Finish to close.

71

Setting System Options

User Guide

Rediscover Cameras
Setup > Advanced > Find Camera section > REDISCOVER button.
On rare occasions, you may lose a camera due to powerline problems, bad weather, or even static electricity.
Rediscover restarts the camera search process to locate cameras on the network that have a password
matching your password (if you have set a password). This may be a convenient way to "delete" multiple
cameras from your system, since all cameras are deleted, and then those which are detected are again added
to your system.
Note: When cameras are rediscovered, they may have different camera numbers than you have previously
assigned. Remember, you can easily change these camera numbers by simply dragging the camera images to
the desired window position in Live mode.
To start this procedure, follow these simple tasks:
1) Click on the SETUP button. The Command Center Setup Program displays.
2) Click on the Advanced tab.
3) In the Find Camera section, click on the REDISCOVER button. A popup message displays.
4) Click YES if you wish the system to rediscover the cameras. Click NO to exit out of the procedure
without rediscovering the cameras.

Set or Change Your Password
Setup > Advanced > Manage Security button.
The WiLife Command Center uses passwords to secure
communications links between cameras, the USB receiver, and
the Command Center. When the Command Center has a
password, unauthorized access to your cameras and video is
prevented. This fact is especially true for apartment dwellers
whose Command Center may be sharing a power grid with other
apartments. If there are multiple Command Center systems
sharing a single powerline grid, then cameras that haven’t been
assigned a password can be picked up by other Command
Center installs that are running on the Command Center's default
password, or have been password protected.
To change the password, follow these steps:
1) Go to the Setup > Advanced dialog.
2) Click the Manage Security button.
3) Enter the current password, if you are changing the
existing password.
4) Type your new password in both the New and Re-enter
fields to confirm the password.
Note: Write this password down it is a difficult process to
clear a forgotten password. If you do forget you
password, review the Troubleshooting topic “I have
forgotten my local WiLife password” for instructions.
5) Click Accept Changes to accept the new password.

Set Password System & Feature Locks
Keep the snooping eyes and tampering fingers of employees or kids off the Command Center by locking
individual features or the whole system while you are away. Lock access to stored video files, camera &
recording settings, arming/disarming alerts, digital pan-tilt-zoom, and more. Your private system password is
the key that locks/unlocks key features.

72

Setting System Options

User Guide

The Password System Lock feature exists on the same screen as the Change Password function located on the
Setup > Advanced tab screen.
To access, click the Manage Security button.
Note: If you are not subscribed for WiLife Platinum, the Access Control section is grayed out. Thus, the “Exit
Command Center” function is the only one available under the non-Platinum running Command Center, which
requires a password --if a password is set-- to exit Command Center.
Similarly, if you are running WiLife Platinum, but no password is set, the Access Control section is also grayed
out.
If any of the settings in the Access Control section are checked, Command Center will require the user to enter
a password in order to gain access. The following table describes each setting:
Option

Description

Exit Command Center

The user will be asked for a password whenever they exit the Command Center.

Show Command Center

The user will be asked for a password when they attempt to open the Command Center
from the system tray.

Setup Options

The user will be asked for a password in order to access the Setup screens that include
functions such as the Setup forms, Disk Usage form, the E-mail Configuration form, and
Calendar. It also prohibits you from deleting cameras.

Playback Video

The user will be asked for a password when they try to enter Playback mode (from the Live
mode).

Arm/Disarm Alerts

Password lock dialog displays when user attempts manually arming or disarming alerts.

Digital Pan/Tilt/Zoom

The user will be asked for a password when they start a Pan/Tilt/Zoom session.

Deleting a Video File

The user will be asked for a password when they attempt to delete a video file.

WAIT "X" MINUTES TO LOCK
Each time the user successfully enters the password, Command Center auto-authenticates for a number of
minutes, as specified on the control panel above (“Wait X minutes to lock"). So if he has entered 10 minutes,
then he won’t be bugged for the password unless he doesn’t use Command Center for 10 minutes. Command
Center resets the 10-minute timer every time he clicks the mouse or hits a key in Command Center.
When 10 minutes of inactivity expires, an event is fired that is supposed to back out of anything that is active
that the user has protected. For example, if Playback Video is checked, it will put Command Center into Live
mode. If a camera is selected for PTZ, it will un-select it. If Setup Options is selected, it will close any of the
following forms (if open): Setup form, Disk Usage form, email configuration form, Command Center schedule
form, Camera Alert Properties form, Event Arm Early Properties form, Event Properties form, and Manual Alert
Properties form.
For example, just to be sure you understand, they won’t even be bothered to do that if they have entered their
password for some other reason, and it hasn’t timed out yet. So maybe they entered it to view the setup panel,
and then decided to go into playback. They won’t be bothered again unless it’s been idle for 10 minutes.
Also, every time you “hide’ the Command Center it automatically zeroes out the timer, so you don’t leave any
time “on the meter” so that someone else could walk in right after you hide Command Center, and find that
there’s still five minutes of time on the timer.

ACCEPT CHANGES
You can change your password, or edit any of the Access Control options, or both, by clicking “Accept
Changes.”

73

Setting System Options

User Guide

Note: If you are not subscribed for WiLife Platinum, the Access Control section is grayed out. Thus, the “Exit
Command Center” function is the only one available under the non-Platinum running Command Center, which
requires a password --if a password is set-- to exit Command Center.
Similarly, if you are running WiLife Platinum, but no password is set, the Access Control section is also grayed
out.
You can change your password, or edit any of the Access Control options, or both, by clicking “Accept
Changes.”

Check for Software Updates
Setup > Advance > Application Updates section > CHECK FOR UPDATES button.
Command Center will compare the software and firmware version dates recorded on your PC with the latest
versions available online. If your PC shows an older date for either one or both of them, Command Center will
offer to download and install the latest version using the Software Manager Wizard.
To check and download new Command Center updates:
Go to the Setup > Advanced tab and click the Update Camera button. The Software Manager Wizard opens
and checks for newer versions of the software.

If the Software Manager finds a newer version, you will be prompted to download and install the update. Click
Next > to continue with the install. To complete the update, simply follow the downloading instructions for the
Software Manager and then the install instructions for the WiLife Install Wizard.
Note: If you have Command Center running, you may be asked to shut it down before starting the installation
process.

Update Camera Firmware
Setup > Advance > Application Updates section > UPDATE CAMERA button.
This feature updates the selected camera with the most recent firmware version currently downloaded to your
PC's hard disk. Firmware versions are typically downloaded as part of an overall software update (see Check
for Software Updates topic). Command Center automatically keeps track of which camera firmware is
appropriate for different camera types such as the Indoor and Outdoor Cameras.
To download new firmware updates:
1) Go to the Setup > Advanced tab screen and click the Update Camera button. The Update Camera
Firmware screen displays.

74

Setting System Options

User Guide

2) After the system checks for new firmware updates, it will notify you if an update for your cameras is
available.
3) Check the “Select” checkboxes next to the cameras you wish to update.
4) Select the firmware file using the Browse button. We encourage you to update to the version
defaulted by the system, as that will always show the latest file.
5) Click the Update Cameras button and wait for the process to complete. While Command Center is
loading the new firmware, the Update Camera Firmware screen gives you a status of the update
process.

Note: Each time Command Center starts up, it automatically checks the firmware versions on your cameras
and the available local firmware files. If it finds that new firmware is available, it will prompt you to update your
cameras. As a result, you do not need to worry about manual checking for new camera updates.

Rebuild Video Segment List
Setup > Advanced > Video Maintenance section > REBUILD VIDEO LIST button.
This operation rebuilds your video database by examining each file in your Command Center Video Directory.
You may want to perform this operation if you suspect your video database has become corrupt by some hard
disk or computer failure. The obvious sign of a corrupt database is missing video segments in the Playback
window. This process may take a long time to complete if you select to rebuild the list for all cameras.
To rebuild your video database follow these steps:
1) Go to the Setup > Advanced dialog.
2) In the Video Maintenance section, click on the REBUILD VIDEO LIST button.
Note: Recording and Playback will halt during this operation. This procedure may take a long time.

75

Setting System Options

User Guide

3) Each camera will indicate the recommended action to be taken for the files associated with that
camera. Most commonly, it simply indicates that No Action is required. If some problems have been
discovered, Command Center may suggest that you execute a Repair or Rebuild operation. Repairs are
recommended if there are only a limited number of minor issues. Otherwise, a Rebuild will be
suggested. Repairs are relatively fast, but Rebuild operations can take a long time, especially if you
have many hundreds of thousands of files. You can change the action by right-clicking on the "Action
to Take" setting for each camera. The actions available are:

4) Click Perform Actions to start the rebuild process.
Note: Recording and Playback will halt during this operation. This procedure may take a long time if all
cameras are selected.

Find Orphan Clips
Setup > Advanced > Video Maintenance section > FIND ORPHAN CLIPS button.
This is a rarely needed and used tool. It searches the current video path (e.g. the default C:\WiLife video) for
any video files that are not currently associated with a camera. This is possible if you have recently removed or
changed cameras. If a camera has been removed from your Command Center system, the video files are still
stored on your computer's hard disk. But they can't be viewed in Playback mode unless Command Center has a
camera object to associate with these orphan video files. This function allows you to create a camera object,
even if the physical camera which captured those files is no longer in your Command Center system.
To use this tool, follow these instructions:
1) Go to the Setup > Advanced dialog.
2) Locate the Video Maintenance section and click the FIND ORPHAN CLIPS button.
If Command Center finds any of these “orphaned” video files, it reports its findings to you, prompting
you to allow Command Center to create a camera to associate with these stored video files.
If Command Center doesn’t find any orphaned video files (most common), a message displays
informing you of this fact. Click OK to close out of the message.

76

Setting System Options

User Guide

System Information
The System Information screen collects and displays information about the configuration of your system such
as hardware configurations, computer components, and software, including signed drivers and unsigned
drivers. When support technicians troubleshoot your system configuration, they require specific information
about your computer. You can use System Information to quickly find the information that these technicians
need to resolve a system problem.
System Information saves data files in a native (.nfo) format. You can also open .cab and .xml files in System
Information. When you open .cab files, you can view the contents of those files by using the Tools menu.

UNDERSTANDING SYSTEM INFORMATION
System Information is a support tool that you can use to quickly locate information about your computer and its
operating system. The category tree in the left pane contains items in a folder view that is similar to Windows
Explorer. The details pane on the right side of the window displays information about the items that you select
in the category tree.

USING SYSTEM TOOLS
The System Information screen offers tools that helps technical support troubleshoot your operating system.
These tools are accessible from the menu option Tools.
Tools

Description

Net Diagnostics

Network Diagnostics scans your system to gather information about your hardware,
software, and network connections.

System Restore

Undo harmful changes to your computer and restore its settings and performance to an
earlier time or restore point without causing you to lose recent work such as saved
documents, e-mail, or history and favorite lists.

File Signature Verification
Utility

Help maintain the integrity of your system by digitally signing critical files so that any
changes to these files can be quickly detected.

DirectX Files

This tool reports detailed information about the DirectX components and drivers installed
on your system. It lets you test functionality, diagnose problems, and change your system
configuration to work best. This tool also tests files, components, and drivers related to the
desktop display, sound, music, input, and the network.

77

Setting System Options
Dr. Watson

User Guide
A program error debugger that helps technical support troubleshoot program errors for
computers running on a Windows Operating System.

Diagnostics Summary Report
The Diagnostics Summary screen displays
comprehensive configuration and status details for
your WiLife Command Center application such as
error tests, WiLife Online status, disk usage,
powerline USB adapter, powerline performance,
bandwidth test, cameras, motion detection, and
email notifications. These details are used by WiLife
technical support staff to better troubleshooting
problems.
Also, create a diagnostics report to send to WiLIfe
technical support. Clicking the Send Info to Support
will compile the diagnostics report
(WiLIfeSupportInfo.ZIP file).
Diagnostics Compiling Note: While the diagnostics
information is being collected, video from your
cameras will be temporarily disabled.
Installation Note: Log files were created during the
installation process in order to collect
troubleshooting information. These files are included
in your system's diagnostics summary.

78

6
Scheduling Alerts &
Recording Events
Scheduling Alerts Overview
The Scheduled Alerts feature gives you the ability to easily create scheduled events which cause
recording to take place, or which arm email or cell phone alerts during selected periods of time.
Scheduled Alerts makes your Command Center a notification tool -- turn email and mobile phone alerts on or
off at certain times, day and night. Events will automatically be armed at the times you scheduled.
Alerts are created using the Recording and Alerts Schedule calendar, a simple click-drag-and-release interface,
which allows you to view your Command Center schedule and modify or create new schedule events. The
calendar displays only one week – each event scheduled occurs every week.
With Scheduled Alerts enabled, your WiLife Command Center will notify you based on the motion sensed by
your cameras, using one of three options: a simple text-only message; a text message that includes one frame
of video; or a video clip. You can also create “no motion” alerts that will notify you that an expected event did
not occur.
Functions of Scheduled Alerts also include the following:
Set a user-configurable Delay time when arming events manually, or when arming the next event early.
For example, set the "delay before activated" time at five minutes. This allows you to get out of the
building before alerts are armed.
If a recorded video clip caused an e-mail or cell phone alert, Command Center will flag the video
segment. This flag is stored in the .wmv file's metadata and can be used as a search criterion on the
Online Search and Playback page of your WiLife Online account.
A link will display in the e-mail alerts that open your WiLife Online account and allow you to view the
video that triggered the alert.

Recording and Alerts Schedule Screen Overview
The Recording and Alerts Schedule Screen allows you to create, edit, or delete recording and alert events using
a simple click-drag-and-release calendar. The calendar displays only one week – each event scheduled occurs
every week.
There are four types of recording and alert events you can schedule.
Events

Description

Arm Alerts

Create an event that arms alerts during a specified period of time, for specified cameras,
and on specific days. Email and mobile phone alerts will be sent during these time periods.

No Motion

Create an alert event in which an alert will be sent if no expected motion has occurred
during the time period. Perfect for situations that have to happen, such as the kids walking
into the house after returning home from school or an employee arriving on time to open
the store.
If this event type is selected, the user can further indicate whether he wants to be notified
by the first qualified motion event during this interval or the last.

Continuous Recording

This causes Command Center to turn recording on during the time period.

Turn Recording & Alerts Off

This selecting causes that no recording (even with motion) will occur during the time period.

79

User Guide
There will also be no alerts sent, but this would be the case anyway. It might better be
named (Turn Motion-Based Recording Off).

HOW DO I CREATE AN EVENT?
Create an event by clicking and
dragging from the start to the stop
time. This creates the event, and
opens an edit dialog where you
can view and edit the properties
of the item. You can bring up this
same dialog by double-clicking on
any existing item. And if you rightclick on an item, a context menu
allows you to edit the item or
delete the item.
You can also just click and drag
an event to move it to a different
time or date. Select the “top” or
the “bottom” of the item to
change the start or stop time by
dragging the top or bottom of the
item up or down.
Note: Command Center does not
allow you to create two scheduled
events with overlapping times.
Also, creating scheduled alert
events is only available with
WiLife Platinum. Creation of
scheduled recording events is
available with or without Platinum.

MENU OPTIONS
Use the menu options to help you quickly manage your scheduled events.
Options

Description

Save

Save all modifications to the Scheduler. The Save button will be active after you make a
change to a scheduled event.

New Event

Create a new event. Clicking on it opens the Schedule Event Properties Screen, allowing
you to set event properties such as the start/end time, day(s) of the week, the event type,
which cameras are affected, and the type of action you need each camera to accomplish
during this time period.
The New Event button will be active if you click on a time block that has not been
scheduled/assigned to an event.

Edit Event

Edit the selected event. Clicking on it opens the Schedule Event Properties Screen, allowing
you to modify event properties. The Edit Event button will be active if you click on a
previously created event.

Delete Event

Delete the selected event. The Delete Event button will be active if you click on a previously
created event.

80

User Guide
RIGHT-CLICK OPTIONS
The WiLife Recording and Alerts Schedule screen offers right-click options that make it easy for you to schedule
immediate events that only require you to set the details for the time period. Create any four event types -- Arm
Alerts, No Motion, Continuous Recording, or Recording Off.

KEY TO COLORED EVENTS
The Recording and Alerts Schedule Screen uses four colors to represent the types of events scheduled.
Colors

Event Type

Black

Recording is turned off

Red

Armed motion alert

Green

Continuous recording

Gray

No motion alert

Opening the WiLife Recording and Alerts
Schedule Screen
The quickest access to the WiLife Recording and Alerts Scheduler
screen is from the Live and Playback screens, using the Alerts
Scheduler Front Control Panel, as shown in this graphic.
Simply click on the dropdown menu and select the option View
Schedule.
You can also access the Recording and Alerts Scheduler screen through
the Setup > Alerts > Schedule Email & Cell Phone Alerts button.

Schedule Event Properties Screen Overview
The Schedule Event Properties dialog screen displays whenever you first create or edit a specific
schedule event. You can also get here by right-clicking on an event, or by double-clicking on an event, or
by selecting an event and then clicking the Edit button at the top of the schedule.
The Schedule Event Properties dialog screen allows you to change the properties of the event, such as the
start/end time, day(s) of the week, the event type, which cameras are affected, and the type of action you need
each camera to accomplish during this time period.
You can also:
Delete the Event.
Change the name of the Event.
Edit the start and stop times.
Change the day(s) for the Event.
Change which cameras are involved in the Event.
If you click “All Cameras” then the item remembers that it affects all cameras, even if you add or
delete cameras later on. If you un-check All Cameras, then you can individually select or deselect
cameras to be affected.
If the Schedule Item Type is No Motion, an additional item shows up on the dialog allowing the user to request
an alert on the first motion in this time interval.
The following graphic describes the fields and functions of the Schedule Event Properties screen:

81

User Guide

No-Show Alerts
The No-Show detection alerts feature allows you to intelligently monitor an area where you expect motion. And
if there is no motion, Command Center alerts you. This feature is perfect for situations that have to happen,
such as the kids walking into the house after returning home from school or an employee who should arrive on
time to open the store.
If this event type is selected, you can further indicate whether he wants to be notified by the first qualified
motion event during this interval or the last.
To create a No-Show Detection Event:
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
2) On the Scheduler calendar, create an item by clicking and dragging from the desired start time to a
stop time, where you release the mouse button. The Schedule Event Properties Screen displays.
3) Select "Report No Motion."

4) Select "Send alert on first motion during interval" if you want to be alerted as soon as motion is
detected. Using an example, if you were creating a "No Motion" event in order to verify the kids return
home from school, you would check this option. If you do have motion, but the box is not checked, you
will not get an alert at all.

82

User Guide
5) Specify the camera(s) you want involved with this event and set camera alert properties for each
participating camera by double-clicking on the camera line or clicking the Edit button. (The Camera
Alert Properties screen allows you to specify the type of message you want to receive, the length of
time between motion alerts, and the number of alerts.)
6) Click OK to save your new "No Motion" alert event. The Recording and Alerts Schedule Screen will
display the new event. Its color is gray.

Set Manual Alert Properties
Setup > Alerts > Set Manual Alert Properties

The Manual Alert Properties screen allows you to view, set and edit alert properties for each camera on the
network message type, length of motion filter, and frequency of alert notifications. These properties tell
Command Center how to send alert notifications when you manually activate them in the Alerts Scheduler
Front Control Panel. You can also edit camera properties by clicking on the Edit button.
Use the illustration below as a guideline for completing the screen:

Arm Event Early Properties
The "arming an event early" feature is accessible from the Live and
Playback screens via the Alerts Scheduler Front Control Panel.
Using the Alerts Scheduler Front Control Panel, you can also
immediately arm manual alerts, disable an active alert, or access the
Recording and Alerts Schedule.
If an alert has not been armed, the Front Control Panel will display
"Alerts Not Armed," as shown in the graphic on this page.
Simply select the option "Arm Manual Alerts Now" (which activates
alerts until you manually turn them off) or "Arm <name of scheduled event> Early." Alerts are now armed.
The functions you can expect from the Alerts Scheduler Front Control Panel are described below:

ALERTS NOT ARMED
When you first install WiLife Command Center, the Front Control Panel will display "Alerts Not Armed" until 1)
you have set up your email server; 2) you have scheduled an alert event in Scheduler; and 3) you select "Arm
Manual Alerts Now" or "Arm <name of event> Early."

83

User Guide
Note: You do not need to create an alert event to select "Arm Manual Alerts Now."
And, the manual arming of alerts is available with or without the WiLife Platinum upgrade.

ARM <NAME OF EVENT> EARLY
The Alerts Scheduler Front Control Panel will always display the next scheduled event in the scheduler's timeline. In the graphical image on this page, the next scheduled event is called 'Event 6.' You simply click on the
Arm Early item in order to arm it earlier than it was scheduled. Once a scheduled event is armed early, the
Front Control Panel will display "Alerts Armed Via Schedule." As with manual arming, you can specify a delay
time before the event it actually armed.
This Alert feature is great for quickly enabling email alerts as you leave work earlier than usual, and want to
turn alerts on early.

DISARM <NAME OF EVENT> EVENT
If you want to manually turn off all alerts, simply select the "Disarm <name of event>."
Selecting this means that even if you have qualified motion events, (and scheduled alert events), no alerts will
be sent. In other words, this is the master “Stop” switch for any alert that may be active.
Note: This option does not turn off future alerts. It only terminates any alert (either manual or scheduled) that
is currently active.

OTHER FEATURE RELATED NOTES
WiLife Icon: System Tray Note: The context menu now includes the same options that allow you to quickly arm
or disarm alerts, both scheduled and manual.
Password Note: If you activate Password System Lock, then you can have the peace of mind that events can't
be armed or disarmed without your password.

Camera Alert Properties
The Camera Alert Properties screen helps you specify camera settings for alert events -- message type, length
of motion required before sending an alert, and the frequency of alert notifications.
The Camera Alert Properties screen is accessible from the Schedule Event Properties Screen > Event
Properties section. Simply double-click on the camera line or click the “Edit” button to open the screen.
Use the illustration below as a guideline for completing the screen:

84

User Guide

Create a Continuous Recording Event
Continuously record for a set time and on specific days, if desired, even if there is no motion on the camera.
To create a Continuous Recording event, follow these instructions:
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
Note: The Recording and Alert Schedule Screen is also accessible through Setup > Recording tab >
SCHEDULE RECORDING TIME.
2) On the Scheduler calendar, click and drag from the desired start time to a stop time, where you
release the mouse button. The Schedule Event Properties Screen displays.
Note: You can also open this screen by right-clicking on a desired time block and select the option
"New Recording Event Off."
3) In the Name field, enter the desired name for the event.

4) Enter the Start and End times for the event.

5) Specify the days of the week you want the event to run on.

6) Select "Set Continuous Recording."

85

User Guide
7) Specify camera event properties for each camera by clicking on a camera line or clicking on the Edit
button.

8) Click the OK button to save the properties for the event. You will notice the new event displays in the
color black.

Create An Event To Turn Off Recording
Disable recording at set times and on specific days, even if there is no motion on the camera.
To create an event that turns off recording, follow these instructions:
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
Note: The Recording and Alert Schedule Screen is also accessible through Setup > Recording tab >
SCHEDULE RECORDING TIME.
2) On the Scheduler calendar, click and drag from the desired start time to a stop time, where you
release the mouse button. The Schedule Event Properties Screen displays.
Note: You can also open this screen by right-clicking on a desired time block and select the option
"New Recording Event Off."
3) In the Name field, enter the desired name for the event.

4) Enter the Start and End times for the event.

5) Specify the days of the week you want the event to run on.

6) Select "Turn Recording and Alerts Off."

7) Click the OK button to save the properties for the event. You will notice the new event displays in the
color black.

Modifying a Recording or Alert Event
From time to time, you may need to modify a recording or alert event. Changing the properties of an event are
very similar to creating one.
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
Note: The Recording and Alert Schedule Screen is also accessible through Setup > Recording tab >
SCHEDULE RECORDING TIME.
2) Double-click on the event you wish to modify. The Schedule Event Properties Screen opens.
Note: You can also right-click on the desired event and select the option "Edit Event."

86

User Guide
3) When you have made the desired modifications, click the OK button.

Deleting a Recording or Alert Event
Over time, you will need to delete a recording or alert event.
1) Click the Alerts Scheduler Front Control Panel > View Schedule. The Recording and Alerts Schedule
Screen displays.
Note: The Recording and Alert Schedule Screen is also accessible through Setup > Recording tab >
SCHEDULE RECORDING TIME.
2) Right-click on the desired event and select the option "Delete Event."
Note: You can also double-click on the desired event. This opens the Schedule Event Properties
Screen. To delete the event from this screen, simply click the button Delete Event and then click OK.

87

7

User Guide

Using Online Viewing
Using the WiLife Command Center, and your WiLife Online account, you can access live video from your
cameras anywhere in the world using a Windows Media enabled Internet browser, wireless PDA, or mobile
phone.

When you enable Remote Viewing, your WiLife Command Center becomes a video server ready to publish video
through the secure WiLife network over the Internet to you, wherever you are. WiLife intelligently creates the
most efficient path through your local routers to your remote device. You connect to your video feed by going to
online.wilife.com and logging into your My WiLife account – using a username and password you set.
Once connected to your account, you select the site and cameras you want to view. The WiLife server then
routes a live video feed to your device.
During this process, WiLife automatically determines your system’s firewall settings and Internet capability in
order to stream video to you in the most direct way possible. If the Command Center cannot find a direct path,
we direct the video feed through WiLife’s network to you. We call this mode “Relay Mode.” In this mode, there
is a three-minute time limit. If Command Center finds a direct path, you are connected via “Direct Mode.” In
Direct Mode, there is no time limit. You can view a video feed for any length of time.
The following illustration shows the remote viewing process.

Y

The Command Center Software
turns your PC into a video server.
When you log into your WiLife
Online account, Command Center
sends the secure video to you.

WiLife Online account
Z Your
is accessible by using a
compatible cell phone,
handheld, or PC, anywhere
you might be in the world,
and at anytime, day or
night.

WiLife Online account allows you to view live,
[Your
secure video feeds for your cameras at one location at
a time. You can choose to view just one camera, cycle
through all cameras, or view all cameras at once.

Cameras send live, secure
X WiLife
video feed over the electrical wires
in your home to your PC.

Remote Viewing has so many applications:

Home Security

Business Security 2nd Home Security

88

Anywhere Anytime Access
Live video from the road
Connect over the Internet
View from PC browser or Windows

User Guide
Mobile cell phone

Family Monitor

Elder Care Monitor

Pet Monitor

How Do I Access My WiLife Online Account?
You can access your WiLife Online Account using any one of these methods:
Using the WiLife Button

Online Setup Tab Link
Click Setup > Online tab.
In the Online Connection section, click on the link
http://online.wilife.com

Click the WiLife button located on both the Live and
Playback screens.
Then, click on the menu options My WiLife and select
My Cameras.

Using WiLife.Com
1) Open an Internet browser.
2) Go to http://www.wilife.com.
3) Click on the menu option My WiLife and select My
Cameras.

NOTE: Go to http://online.wilife.com to go
directly to your account.

Viewing Video in Direct vs. Relayed Mode
DIRECT MODE
If you are viewing video Direct Mode, you are in the best possible mode. However, the Internet may still block
video for a number of reasons. If you do not see video after a few minutes, consider switching to Relayed
Mode, which uses our WiLife network and requires less browser ability. To switch to this mode, you simply click
on the button SWITCH TO RELAYED MODE. You can switch back to Direct Mode at any time.
There is no viewing time limit in this mode.

RELAYED MODE
If you are viewing video in Relayed Mode, it is because your firewall or other Internet influences are preventing
direct access to your video. Relayed Mode directs the video feed through WiLife’s network to you. Because of
this, there is a time limit of 3 minutes for each viewing session. Of course, you can re-connect and receive
another 3 minutes viewing time, as many times as you want.

89

User Guide
If you would like to use Direct Mode and not be restricted to a time limit, you can enable UPnP on your router.
If you cannot enable UPnP, you can manually set ports in the router for Command Center to use. The port
addresses Command Center uses are 20570 to 20575. (Contact the manufacturer of the router or see your
firewall or router documentation for complete instructions about manually configuring ports.)
If you are using Relayed Mode, you do not have the option to switch to Direct Mode.
Mobile devices will always use Relayed mode.

Online Viewing From a PC
Note: This process assumes that you have completed the setup steps for Online Viewing.
Online Viewing is a process that consists primarily of two easy steps – logging into your WiLife Online Account
and selecting which camera or cameras you want to view. This section shows you how to accomplish those
tasks.
Our Online Viewing feature, however, offers more options that help enhance your experience. We will discuss
those in the following section as well. The layout of the section’s topics are as follows:
Log in to your WiLife Online Account
Use the My Cameras Page
View the video feed for one camera
View the video feed for all cameras
View the video feed for your cameras using the cycle feature
Using the Video Viewing Window
Viewing video in Direct or Relayed Mode

Logging into Your WiLife Online Account
online.wilife.com > My Cameras

1) Go to online.wilife.com. If you have not previously logged
in, the Please Log In page displays. These instructions
explain how to log in from this page:
2) Enter your e-mail and password. Then click Log In. You
will then be redirected to your WiLife Online page.
Hint: If you mark the “Remember me next time” check box, the
system will automatically open your WiLife Online page.
If you ever forget your password, you can come to the Log In
page and click on the link “Have you forgotten your password?”
Instructions regarding this task are found later in this chapter.

90

User Guide

Using the My Cameras Page
online.wilife.com > My WiLife > Login

The My WiLife page allows you to see all your WiLife sites and cameras on one page.
Your account page is accessed by going to online.wilife.com.
The layout of the page is designed so you can easily distinguish between sites and the cameras used for each
site. In the example below, you can see the information and options available for each site.

Here are some hints to help you better understand the links on the page:
Status LED

Active Locations
display with a green
icon.
Inactive Locations
display with a red
icon.
Active locations
without active
cameras display
with a yellow icon.

Site Name
Click on the site’s name
to open the Manage
WiLife Online page.

[On] Connection Monitoring
Is “On.” Click to turn “Off.”
[St] Go to Storage page
[RP] Go to Remote

Location Status
Displays Available
or Offline

View All
Allows you to see the live video
from all of your cameras, all in
one view.

Cycle

Manage
connections with
the Command
Center Site and
cameras

WiLife
cycles
through
each
camera’s
Camera Name
live video
Click the link to open the viewing page feed.
and view this camera’s live feed.
Click to open the viewing page and
view this camera’s live feed.

View the Video for One Camera
online.wilife.com > Camera icon or Camera's name

To view live video for just one camera, follow these steps:
1) Go to online.wilife.com.
If you previously marked the “Remember me next time” check box when you last logged in, the system
will automatically open your My Cameras page. If not, you will need to enter your login name and
password. (See Logging into Your WiLife Online Account for instructions.)
2) On the My Cameras page, click on the camera icon or the camera's name, which displays beneath the
camera icon.
The Video Viewing Window opens and the video plays in the viewing panel, as shown in this example:

91

User Guide

View the Video for All Cameras In One Image
online.wilife.com > Camera name or icon

To view live video for all cameras at a specific site, follow these instructions:
1) Go to online.wilife.com.
If you previously marked the “Remember me next time” check box when you logged in, the system will
automatically open your My Cameras page. If not, you will need to enter your login name and
password. (See Logging into Your WiLife Online Account for instructions.)
2) On the My Cameras page, click on cameras name or icon. The Video Viewing Window displays.
3) Click View All.
Because you are viewing the video feed from all of your cameras, the viewing panel will be divided up
into squares, each square displaying the video for one of the cameras. The illustration below shows
what the viewing panel displays if you have 2, 3, 4, 5, or 6 cameras:

X

Y

X

Y

Z
2-Camera View

3-Camera View

X

Y

Z

[

4-Camera View

X

Y
Z

[ \
5-Camera View

X
[ \

Y
Z
]

6-Camera View

View the Video for Your Cameras Using the Cycle Feature
online.wilife.com > Camera name or icon

The “Cycle” option allows you to view the live, secure video for all of the cameras at the selected location one
at a time. The Viewing page will rotate through each camera and will continue to do so until you turn the option
off.
To use this feature, follow these steps:

92

User Guide
1) Go to online.wilife.com.
If you previously marked the “Remember me next time” check box when logging in, the system will
automatically open your My Cameras page. If not, you will need to enter your login name and
password. (See Logging into Your WiLife Online Account for instructions.)
2) On the My Cameras page, click on the cameras name or icon. The Video Viewing Window will display.
Please wait while WiLife connects.
3) Click Cycle.

USING THE VIDEO VIEWING WINDOW
online.wilife.com > Camera name or icon

The Video Viewing Window automatically opens when you click on a camera's name or icon from the My
Cameras page.
As the following example shows, the Video Viewing Window consists of a viewing panel, additional camera
icons, options to View All or Cycle through all cameras, options to change the size of the viewing panel, and a
streaming video status bar.

Here are some additional notes about the features and options on the screen:
Components of the Viewing Window

X

Name of the location of cameras.

Y

List of cameras set up at this location. Click on a camera to view the live, secure video.

Z

View All : Allows you to see the video from all of your cameras in one view.

[

The video viewing panel displays the video.

\

The status bar shows the following information:

Cycle : Viewing panel rotates through each camera’s video.




Status of the video-- connecting, buffering, or playing.
The amount of viewing time left in the current session. Only displays if you are using Relayed
Mode.

93

User Guide


The Normal and Large options allow you to alter the size of the video. The default setting is
Normal.

Managing Your WiLife Online Account
online.wilife.com > My Account

Your My WiLife Account allows you to manage account subscriptions and billing, your online account
information, and online viewing preferences.
Here is an example of what the My Account Page looks like:

Changing Video Preferences
online.wilife.com > My Account > Video Preferences

The Video Preferences page allows you to optimize your
online viewing experience. Setting the correct data rate to
match your broadband speed for WiLife Command Center
and your download speed for your browser will give you the
best video quality and reliability.
The page allows you to specify your Internet connection
speed. The quality of streaming video varies depending on
the speed of your connection to the Internet. The higher your
Internet connection speed, the better your viewing experience will be.
The Quality and Size dropdown field allows you to specify the viewing quality you see. If you want to view your
video with the best quality, select the first option -- I prefer video quality over image size. If you want to view
the biggest possible picture, then select the second option -- I prefer Image size over video quality.
On slower connections, you may notice a reduction in video quality.

94

User Guide

Changing Your WiLife Online Password
online.wilife.com > My Account > Change Password
The Change Password option can be used when you have accidentally forgotten your original password or if
you feel the security of your password has been compromised. Besides, changing your password on a regular
basis is one way of ensuring a secure internet experience.
Change your password by following these steps:
1) Go to online.wilife.com and click on My Account.
If you are logged in, the system will automatically open your My WiLife page. If not, you will need to
enter your login name and password.

Have you forgotten your password?
If you are logged out and can't log back in because you don't remember your password, click on the
link “Have you forgotten your password?” Enter your email address and then click SUBMIT. WiLife
will send an email to you with a temporary password.
When you receive the new password, log back into your WiLife Online Account using this temporary
password.
2) Click on Change Password. The Change Password page displays, as shown in this graphic.

3) In the Current Password field, enter the temporary password.
Note: You may be changing your password for other reasons. If so, just enter your current password.

4) In the New Password field, enter a new password.
Hint: We recommend that your password is at least 7 characters long and includes a number. Punctuation
symbols are also allowed.

5) Re-enter the new password in the Confirm Password field.
6) Click CHANGE PASSWORD.
7) Now that you have changed your WiLife Online password, you
must change the password in the Command Center Software
> Setup > Online tab screen.
If you do not change the password on the Remote tab screen
in Command Center, then the Remote Viewing process will
not recognize your account. Errors you may encounter include the following:


“Unknown Remote Viewing Account.” This message displays on the Live screen, in the
message panel.



“Disconnected–Account Unknown.” This message displays on the Online tab screen, in the
Status section.

95

User Guide

Changing Your WiLife Online Login Name
online.wilife.com > My Account > Change Login

Note: When you change your login name, your account will be disabled until you complete the process, as
described below.
If the e-mail address you are using for your wilife.com login is no longer valid, please change login. A valid email address will allow you to recover a lost password and use other services.
Note: If you do change your login, DO NOT FORGET TO UPDATE your Username and Password in your WiLife
Command Center. Instructions below.
To change your login name, follow these instructions:
1) Go to online.wilife.com.
If you are logged in, the system will automatically open your My Cameras page. If not, you will need to
enter your login name and password.
2) Click on My Account.
3) Click “Change Login.”

4) In the Current E-mail field, enter your current e-mail address.
5) In the New E-mail field, enter the e-mail address that you want to use for WiLife Online.
Note: It must be an active Internet e-mail address.

6) Re-enter the e-mail address in the Confirm E-mail field.
7) Click the button CHANGE USER LOGIN. An activation e-mail will be e-mailed to you.
8) Open your e-mail account and open the e-mail that was forwarded to you by WiLife. Follow the
instructions in the e-mail.
9) Now that you have changed your WiLife Online Account login name, you must change the Email login
name in the WiLife Command Center > Setup > Online tab screen. See “Create Your WiLife Online
Account” for details.

If you do not change the E-mail on the Online tab screen in Command Center, then the Remote
Viewing process will not recognize your account. Errors you may encounter include the following:

96

User Guide


“Unknown Remote Viewing Account.” This message displays on the Live screen, in the
message panel.



“Disconnected–Account Unknown.” This message displays on the Online tab screen, in the
Status section.

10) You can now go to online.wilife.com and log into My WiLife using your new email.

Changing Settings For Personal Preferences
online.wilife.com > My Account > Personal Preferences
View and edit your personal web site preferences including your name, business name, and whether or not
WiLife may contact you with important information and new product announcements.
To update your user profile, follow these instructions:
1) Go to online.wilife.com and click on My Account.
If you are logged in, the system will automatically open your My WiLife page. If not, you will need to
enter your login name and password.
2) On the My Account page, click on Personal Preferences.

3) When you have completed filling out the form, click the Save button.

97

User Guide

Manage WiLife Online Page Overview
The Manage Sites and Cameras page is used to see details about each location and its cameras for
troubleshooting purposes and for removing a location and/or cameras from Online Viewing.
The Manage Sites and Cameras page is accessed by clicking on the Pencil icon sitting next to the site
line on the My Cameras page.
Here are some descriptions of the information and options available on this screen:
Column Name

Description

Alerts

Arm or disarm alerts schedule.

Subscription

Activate or deactivate WiLife Platinum for this site. You can also change subscription
plan.

Â…

Mark this checkbox when you want to remove a Location or a Camera.
A Location or Camera is not removed until you click the REMOVE CHECKED button.

Status

“Online” indicates that the Command Center Software system is running. “Offline”
indicates that it is not on.

Last Connection Date

The date someone connected to this location.

Command Center
Version

The version of the Command Center Software system running at this location.

MAC Address

The media access control address for the camera.

Version

The firmware version running on the camera.

REMOVE CHECKED

Removes the Locations or Cameras check marked.

Here is an example of the Manage Sites and Cameras page:

98

User Guide

Removing a Location or a Camera
Removing your location or cameras is perfectly safe and easy. The WiLife Command Center will re-register
itself and any cameras to keep your WiLife Online accurate and fully up-to-date.
To remove a location or a camera, follow these instructions:
1) Go to online.wilife.com.
Note: If you are logged in, the system will automatically open your My Cameras page. If not, you need
to Log In.
2) Pick the site you will be removing cameras for, or removing the whole site.
3) Click the wrench icon next to the site line.

The Manage Sites and Cameras page displays, as shown in the graphic below.

To remove the entire location, click the checkbox next to the location name and then click the
REMOVE CHECKED button.
To remove one or more cameras, click the checkbox next to the cameras you wish to remove, and then
click the REMOVE CHECKED button.
Note: Cameras that you don’t want to show up for Online Viewing must be removed from the
Command Center Software. As long as cameras are still assigned in the Command Center Software,
WiLife Online will recognize them and show them.

99

User Guide

Viewing Your Cameras Using a Cell Phone or Handheld
The following requirements must be met prior to viewing remotely using a cell phone or handheld:
1) Registered for a WiLife Online account? If not, please see the topic “Create Your WiLife Online
Account” for complete details.
2) Have enabled Remote Viewing in Command Center? If not, please see the topic “Enable Command
Center for Remote Viewing.”
3) Does your PDA or Cell Phone meet the system and browser requirements? To verify, please visit
http://www.wilife.com/About/Requirements.aspx and view the section titled “Cell Phones and
Handhelds.”

FIRST TIME PDA VIEWING
If you are logging into WiLife Online for the first time, you will see the
landing page. The landing page has three options:
Login link
WiLife Online button
Live Demo button
Hint: Click the LIVE DEMO button to connect to the demo site to
view live video from a WiLife test location. This option can be used
to test your handheld to make sure that it is compatible for remote
viewing.

Because this is the first time opening WiLife Online, you need to login.
1. Click the Login link or the WILIFE ONLINE button.
2. Enter the e-mail address and your password.
3. Mark the checkbox “Remember me next time.”
4. Click the LOG IN button.
Note: Now that you have logged in, the website remembers you and
will automatically direct you to the landing page. Simply click the
button WILIFE ONLINE.

100

User Guide

USING THE WILIFE ONLINE PAGE (FOR HANDHELDS)
Your WiLife Online page allows you to see your WiLife network all on one
page.
In the example on the right, you will notice the names of your locations and
cameras. You will see if a Location is Offline or Available.
Each camera name is a link that opens the Video Viewing Window and
displays live video for the camera you selected.
Active cameras appear in green and underlined text.

When you click on one of the camera links, you will see messages similar to these:
This window will display as
long as WiLife is
connecting to the
Command Center system.
With handheld devices,
there is a time limit of 3
viewing minutes. When the
time expires, you are
welcome to reconnect and
view video again.

VIEWING A CAMERA’S LIVE VIDEO ON A HANDHELD
The Video Viewing Window is used to show video from the camera you
selected.
The window consists of the following sections:
Name of the Location.
Status of the video feed (buffering, playing, stopped, etc.).
Video Viewing Panel.
Player control panel that includes the time counter, time progression
bar, percent of size of video panel, and basic player control buttons
(full screen, stop, play, and decrease/increase video size).

101

For some handheld devices,
you will see a security
message similar to this:
“Running a system
command on the item might
be unsafe? Do you wish to
continue?
Click “Yes.”

8

Troubleshooting

User Guide

Troubleshooting
We expect that you will rarely have problems with your WiLife system. However, in the event of a problem, you
will find solutions to those issues here. You can also find additional resources at www.wilife.com/support.
Below you will find specific tables directed at solving Installation, Configuration, Maintenance and other
problems. Choose the one that best fits your circumstance.
STOP – DO NOT RETURN THE CAMERA KIT TO YOUR RETAILER
We are ready to help you get the most benefit from your WiLife system! If you have any questions about setup or
operation, please visit our online support site or call our toll-free line.

If one of these solutions does not solve your problem, please contact WiLife Customer Support and we will
gladly assist you. You can contact us using our web form, available on our website at www.wilife.com/support >
Knowledge Base and Contact Support. You may also call 888-GOWILIFE (888-469-4543).

Installation Problems
Installation Problem

Setup does not automatically
run when inserting the CD

Command Center does not
automatically find my
cameras

My cameras appear for a few
seconds an then go away

Solution

• Ensure that the CD label is facing up.
• Open the CD from My Computer and double-click the autorun.exe program.
• Check the CD for scratches or flaws. If you found problems, call WiLife support for a
replacement.
• Reset the camera by unplugging the power supply and then replugging it in to the wall.
• Verify that the camera power supply and the USB receiver have power by checking if
the status lights have power.
• Verify that the camera power supply and the USB receiver are plugged directly into a
power outlet and not a power strip or UPS.
• Ensure the Ethernet cable between the camera and power supply is secure.
• Ensure the USB receiver is plugged securely into the PC.
• Verify that you have properly configured any PC firewalls by reviewing the chapter on
Configuring Your PC Firewall.
• Close other applications that may be interfering with Command Center.
• Test another outlet for your camera, perhaps one closer to your PC.
• Click the Rediscover button on the Setup>Advanced dialog.
• Verify that the camera ON/OFF button on the main window is set to ON.
• Refresh your environment. To do this, 1) restart you computer, 2) reset your USB by
removing and reconnecting the USB-to-PC cable, and 3) reset your cameras by
unplugging and re-plugging them into the power outlet.
• Verify that your powerline network has proper IP address setup. If you have been
running Command Center V1.4, this will be an IP address of 169.254.X.X. After you
have installed and run Command Center V1.5, your Command Center USB adapter
should have two network addresses: 172.X.X.X and 169.X.X.X (seen via the Advance
button in Network Connections / TCP/IP Properties of Windows Control Panel).
This problem is most commonly caused by a USB socket that is underpowered. These
sockets do not provide the electricity necessary to power the WiLife receiver. This is
most common in PC’s built prior to 2001. You have two options:
• Add a new USB 2.0 card to your PC or laptop.
• Add a powered USB hub between your USB socket and the WiLife USB receiver.

102

Troubleshooting

Installation Problem

Camera suction cup comes
free from the window

WiLife User Guide

Solution

• Clean the window to ensure an airtight fit.
• With your fingertip, place a very light layer of vegetable or olive oil around the edge of
the suction cup.
• Always use the strain relief mini-suction cup for added safety by attaching it to the
glass and cable.

Setup Problems
Setup Problem

After a few minutes or even
seconds Command Center
drops my camera

The cable connecting the
camera to the power supply is
too short
My primary camera is shown
in the second camera
position

• On older machines (pre 2001), some USB sockets may be underpowered or
incompatible with the USB 1.1 standard. Upgrade your computer by adding a USB 2.0
card or hub.
• Check your firewall settings. Some firewalls close communications after a few seconds
of operations.
• You may purchase a longer Ethernet cable or Ethernet Cable Coupler at our online
accessory store.
• Purchase a standard CAT5e Ethernet cable from you local computer accessory retailer
(up to 80 feet). (Note: crossover CAT5 cables will not work with our system.)
From the Live Mode, click on a video panel and drag it to the panel you want it to
display. This rearranges camera order.

My cameras are recording too
frequently

• Reduce camera motion Sensitivity on the Setup>Recording dialog.
• Reduce the size or number of motion zones.

My camera is not following my
recording schedule

• Ensure the camera ON/OFF button on the main screen is ON.
• Verify that your computer clock is correct.
• Check your recording schedule to validate the days-of-the-week and times. Remember
12AM is midnight, not noon.
• Check your recording schedules to ensure you do not have overlapping schedules that
conflict.
• Contact your e-mail provider for details on connecting to their SMTP server. You can
usually find this information on your e-mail provider’s Internet support page.
• Create a new e-mail account using gMail or other e-mail services that supports SMTP
(www.gmail.com).
Most e-mail providers limit the maximum size of e-mails and limit the cumulative size of
all e-mails in your system.
• Delete or archive outdated e-mails from your system.
• Contact your e-mail vendor to have them configure your account for larger e-mail
messages.
• Select a smaller alert message type. The “Send Text Message” is smallest and the
“Send Video Frame” e-mail is usually about 50KB.
Command Center sends an e-mail alert when a camera detects motion and the length of
the motion meets or exceeds your settings. To reduce the number of messages, you
can:
• Reduce recording events by reducing motion sensitivity or changing motion zones on
the Setup>Recording dialog.
• Increase the Minimum Motion time on the Setup>E-mail dialog.
• Increase the Maximum Frequency time on the Setup > E-mail dialog.

I do not know my SMTP
account information

My alert e-mails are being
rejected because of size

I am getting too many e-mail
messages

103

Solution

Troubleshooting

WiLife User Guide

Video Problems
Video Problem

My video is fuzzy

My video is too dark or too
light
My video windows are black
and do not show video

I cannot see images in low
light conditions

I cannot see the detail I need
in on-screen objects

My live video lags several
seconds behind the real
motion

My camera view is too narrow
or too wide
Live video skips and jumps

104

Solution

• Clean the lens glass with soft cloth designed for cleaning eyeglasses. This will remove
any dust or dirt.
• If your camera is pointing out a window, clean the glass inside and out.
• Focus the camera by gently turning the outer lens clockwise or counter clockwise. You
will find this easiest by plugging the camera into a power outlet near your PC. (See the
section on Focusing and Aiming the Camera in the Getting Started chapter of this
documentation for more information.)
• If you are trying to focus on an item less than 3 feet from the camera, you may want to
try a lens with a shorter focal point from our online accessory store.
• Ensure the camera has sufficient light.
• Use the Setup>Camera options to adjust the camera brightness and contrast options.
We find Auto Brightness performs best in changing light conditions.
• Upgrade your video drivers to the latest version. You can find these drivers on the
manufactures support website.
• Verify that you have installed the latest version of Windows Media Player.
• Reboot your computer to reset the video card.
• Check the Setup > Camera > Auto Brightness option to allow the smart WiLife Camera
to automatically adjust to changing lighting conditions.
• Increase the lighting of your target scene.
• Watch for our soon to be released outdoor day/night camera.
• Clean the lens glass with a soft cloth to remove any dust or dirt, being careful not to
scratch the glass.
• Focus the camera by gently turning the outer lens clockwise or counter clockwise. You
will find this easiest by plugging the camera into a power outlet near your PC. (See the
section on Focusing and Aiming the Camera in the Getting Started chapter of this
documentation for more information.)
• Change the image resolution from QVGA (320 x 240) to VGA (640 x 480) in the
Setup>Camera dialog.
• Increase the camera Bit Rate on the Setup>Camera dialog.
• Increase the lighting in the room.
• Upgrade the camera lens using one from our accessory store (www.wilife.com).
This is most commonly caused by wiring that is poor or by unusual noise on the wiring
system. An underpowered computer or video card can also cause it.
• Plug your camera into an outlet on the same circuit as your PC to test if this line noise
or poor wiring is the cause of the problem.
• Test connecting your camera and USB receiver into other outlets that may not have
the wiring or noise problem.
• Reduce the number of live video windows you have displayed.
Your WiLife Camera was shipped with a wide angle lens that should fit most
applications. If you find you have need for wider or narrower viewing angles, check out
our additional lenses at www.wilife.com.
WiLife was tuned to ensure high-quality recording first, and great live viewing second.
You may find that live video skips from time-to-time if your PC is underpowered or your
HomePlug network is overloaded. Here are a few adjustments to improve live video
viewing:
• Reduce the frames per second (fps) on the camera setup.
• Reduce the video quality to QVGA from VGA.
• Ensure you are running a PC that meets the minimum system requirements, and
preferably one that matches the recommended system requirements.
• Close unneeded applications running on your computer.
• Run virus and spyware detection software to ensure your computer is clean.
• Some power outlets are not wired well; test your camera by plugging it into a power
outlet closure to your USB Receiver (for best results, try using the same outlet for
both).

Troubleshooting

WiLife User Guide

Maintenance Problems
Maintenance Problem

My CPU is pegged at 100%

Message “Password does not
match password in powerline
adapter”

I have forgotten my local
WiLife password

Solution

• Test if Command Center.exe is using the CPU by checking Task Manager (CRTL-ALTDEL>Task Manager>Process Tab).
• If Command Center is taking the CPU do one or more of the following:
• Reduce the number of live cameras you are viewing from the 6-camera view to the 4camera view, or from 4-camera view to 1-camera view.
• Reduce camera resolution from 640 x 480 to 320 x 240.
This usually occurs when you change the USB receiver attached to your PC or you
change the PC used to run Command Center. Follow these steps in either case:
• Enter your former password into the Old Password field.
• Enter your former password (recommended) into the New Password fields.
• Validate that you can now see your cameras. If not, follow the steps for the “I have
forgotten my local WiLife password” problem and solution.
Follow these steps to reset your local WiLife password:
1. Exit Command Center from the task tray icon.
2.

Click My Computer from the Start menu.

3. In the address field, enter the path:
“C:\Documents and Settings\All Users\Application Data\WiLife\WiLife”

A friend gave me a camera
and I do not know its
password

105

4.

Select and delete the file Command Center.ini.

5.

Reset each camera by pressing the reset button on the bottom of the camera with a
paperclip while the camera is powered.

6.

Restart Command Center. Command Center will prompt you for a new password.

7.

From Command Center, enter Setup>Advanced and click the Add New cameras
button.

8.

You are now back up and running.

Remember that passwords are stored in the camera’s power supply, not the camera. If
you get a new camera & power supply from a friend or from eBay you will need to reset
the password before installing the camera. Follow these steps to clear the old password:
1.

Power-up your camera by plugging in the power supply and connecting the camera
using the Ethernet cable.

2.

Wait until the camera’s green status lights are flashing.

3.

While the camera is on, reset the camera by gently pressing a paperclip against the
reset button hidden below the small hole next to the camera’s Ethernet connector.

4.

Follow the steps in this manual for adding a new camera.

Troubleshooting

Maintenance Problem

Command Center does not
see my cameras

Command Center seems to
run slowly

My camera is not recording
motion

Command Center is not
sending e-mail alerts

106

WiLife User Guide

Solution

• Reset the camera by unplugging the power supply and then replugging it in to the wall.
• Verify that the camera ON/OFF button on the main Command Center window is set to
ON.
• Verify that the camera power supply and the USB receiver have power by checking the
status lights, some of which flash and others which are solid on.
• Verify that the camera power supply and the USB receiver are plugged directly into a
power outlet and not a power strip or UPS.
• Ensure the Ethernet cable connecting the camera with the power supply is secure.
• Ensure the USB receiver connected securely into the PC.
• Verify that you have properly configured any PC firewalls by reviewing the chapter on
Configuring Your PC Firewall.
• Close other applications that may be interfering with Command Center.
• Test another power outlet for your camera, perhaps one closer to your PC.
• Click the Rediscover button on the Setup > Advanced dialog.
• Refresh your environment. To do this, 1) restart you computer, 2) reset your USB by
removing and reconnecting it PC-to-USB cable, and 3) reset your cameras by
unplugging and re-plugging them into the power outlet.
• Reset each camera by pressing the reset button on the bottom of the camera by
gently inserting a paperclip into the small hole near the network connector.
• From the Setup>Advanced dialog, execute the Add New and Rediscover camera
operations.
Command Center is a 21st century application and is tuned for use on modern PCs.
Though we provide minimum system requirements for running Command Center, you
may find some functions operate slowly on underpowered machines.
• Ensure you are running a PC that meets the minimum system requirements, and
preferably one that meets the recommended system requirements.
• Close unneeded applications running on your computer.
• Run virus and spyware detection software to ensure your computer is clean.
Command Center uses two methods to record video: Camera Motion Detection and user
defined Recording Schedules. If you have disabled both of these options, cameras will
not record. Check the following to ensure recording is configured properly:
• Check the Setup > Recording options page for each camera and ensure the camera
has defined motion zones.
• Ensure the “Enable motion detection for camera” checkbox is checked.
• Check your camera recording schedule to ensure the cameras are turned on (not
scheduled to be Off).
• Increase your motion sensitivity settings.
Command Center requires four elements to send an e-mail alert. Check the following
items on the Setup > Alerts dialog for each detected camera:
• Ensure you have properly set the SMTP server settings and executed the Test button
operation.
• Verify your “Send E-mail to” e-mail addresses are correct.
• Choose the alert action for each camera.
• Ensure the “Enable E-mail Alerts” option is checked.
• Adjust the Minimum Motion time to meet your needs.
• Check the Spam Blocking options for your receiving e-mail account.

Troubleshooting

WiLife User Guide

Maintenance Problem

I am unable to see my site or
cameras from WiLife Online
account

Solution

To view your cameras remotely you need four items: proper Command Center
configuration, an active WiLife Online account, Internet connectivity, and a compatible
remote device. Check the following items:
• Ensure that you have created a WiLife Online account by registering at
www.wilife.com.
• Verify that your account name (e-mail address) and password match those used to
create your account.
• Test your account information accuracy by going to the Setup > Remote dialog and
clicking the Apply Changes button.
• Test your internet connection from your device by opening an Internet browser on the
device and going to the www.wilife.com site.
• Test the compatibility of your Internet Browser or Cell Phone by reviewing our
documented system requirements.

Status Lights
We incorporated Light Emitting Diodes (LEDs) as part of our design for the WiLife Camera, Power Supply, and
USB receiver to make it easy to quickly diagnose many problems.

CAMERA STATUS LIGHTS
There are six status lights (LEDs) on the camera in various locations. Point the camera lens toward you with the
three green LEDs on the right-hand side to read the following table.
LED

Description

Top Green

Flashes when the camera captures a video frame

Middle Green

Flashes when the camera encodes a video frame

Bottom Green

Flashes when the camera sends a video frame to Command Center

Front Red

On when camera has power and flashes when it detects motion. Note that you
can disable this LED from the advanced camera setup

Bottom Green

Located near the network connector, the green light is on when the camera has
successfully started its internal software

Bottom Amber

Also located near the network connector, the amber light flashes when it sends
data over the network. It flashes slowly when communicating with the power
supply only and quickly when sending data to the Command Center application

POWER SUPPLY STATUS LIGHTS
There are five status lights on the WiLife Camera power supply.
LED

107

Description

Top Green

Steady green when power supply has power

Middle Green

Steady green when the power supply is connected to the HomePlug network

Bottom Green

Flashes when sending and receiving data to the camera

Bottom Green

Located near the network connector, the green light is on when the camera has
successfully linked to the camera

Bottom Amber

Also located near the network connector, the amber light flashes when sending
and receiving data to the camera. It flashes slowly when communicating with the

Troubleshooting

WiLife User Guide
camera only and quickly when sending date between the camera and Command
Center

USB RECEIVER STATUS LIGHTS
There are three status lights on the USB Receiver. Because the USB Receiver gets its power from the USB port,
these lights will be on even when you have not plugged the receiver into an outlet.
LED

108

Description

Top Green

Flashes when it detects a collision between two network packages (normal)

Middle Green

Flashes green when sending and receiving data from the cameras

Bottom Green

Solid green when successfully linked to the computer

9

Configuring Your Firewall

User Guide

Configuring Your Firewall
Firewall Basics
Firewall configuration issues are our most common support call. In this chapter, we help you understand and
configure your firewall, saving you and us the trouble of a support call.
Simply put, a firewall is a device, software or hardware, which controls the flow of network traffic between your
computer and the outside world. Having a good firewall is important to prevent hackers and viruses from
getting access to your computer.
Many popular firewalls run directly on your PC; they include Microsoft Firewall, Symantec Internet Security,
ZoneAlarm, BlackICE, McAfee Personal Firewall, and many others. Each vendor provides a different interface
for network management and use different rules for protecting your computer. Many of them have built
screens and dialogs that automatically prompt you to allow and disable network access for specific programs.

Internet Filters
Internet filters are a different form of network firewall. They work to protect individuals and computers from
accessing potentially objectionable materials. These filters capture internet requests and either block or allow
them depending on whether they pass their internal tests. Like firewalls, Internet Filters can block
communications with your WiLife Cameras.

WiLife Firewall Requirements
Important Note: This topic is for those who must manually configure their firewall as a result of using strict
network security policies, or for general information about firewall requirements for WiLife system.
In general, most firewalls automatically prompt users to “allow” WiLife access to the network resources and
WiLife automatically configures most routers for direct remote viewing.

While firewalls are useful in protecting access to your PC, they hinder the performance of the WiLife Command
Center if not configured properly. In order for you to view cameras in your home or business and for remote
viewing access, you need to allow firewall access to WiLife Command Center. Allowing firewall access typically
involves adding rules to allow required network ports, or allowing all network traffic from a specified
application. In addition to opening necessary network ports, firewalls and content filters should be configured
to not interfere with the networking communication needed by WiLife Command Center.
The WiLife Command Center uses two networks. First, the Command Center software connects to each of your
WiLife Cameras on your HomePlug powerline network or other LAN network. When the WiLife USB HomePlug
adapter is used for the camera network, the Command Center software will use DHCP (Dynamic Host
Configuration Protocol) to give cameras an IP address. This requires you to open port 67 (inbound) and 68
(outbound) for UDP broadcast traffic on the camera network.
Communication between the cameras and the Command Center software also uses UPnP (Universal Plug and
Play), which must be allowed. Some software firewalls use a separate rule to control UPnP traffic. The other
ports used for controlling the camera and receiving video are outbound ports that must also be allowed.
(Usually, most firewalls don't block outbound traffic).
Second, the Command Center software connects to the Internet to provide you with Remote Viewing access to
your video, email notifications when motion is detected, and the ability to automatically check for updates, etc.
WiLife Command Center uses two common protocols to communicate -- HTTP and XMPP.

109

Configuring Your Firewall

User Guide

Troubleshooting Note: XMPP also happens to be used in some Instant Messaging (IM) software such as
Google Talk. If a firewall is trying to block all IM communication, it will likely also block remote viewing and
control.
WiLife Networking Protocols
Description
UPnP Discovery
UPnP Control
Video Streaming
Camera Control
DHCP
WiLife Online
Relay Remote Viewing
Direct Remote Viewing

Ports Required
UDP: port 1900
TCP: ports 50000-65000
TCP: port 22211
TCP/UDP: ports 5800-5821
UDP: port 67inbound, port 68 outbound
TCP: ports 80, 443, 5222 (outbound)
TCP: port 80 (outbound)
TCP: ports 20570-20575 (inbound)

Network
Camera
Camera
Camera
Camera
Camera
Internet
Internet
Internet

(or other custom direct mode port)
Email Notifications

TCP: port 25 (outbound)

Internet

(or other custom SMTP port such as 465 for GMAIL)

The Command Center’s ability to communicate with the Internet also effects the connection with remote
viewing, in either direct mode or relay mode. With relay mode, the video is sent to WiLife servers from which
the remote client receives the video. With direct mode, your computer is acting as a server that delivers live or
recorded video remotely directly to the client.
Direct mode gives you the best remote viewing experience. However, a computer on the Internet must be able
to directly connect with the computer running Command Center. If a UPnP-enabled router is detected, WiLife
Command Center will attempt to use UPnP NAT to automatically map a port (between 20570 and 20575) from
the router to your computer for direct remote viewing. If you do not have a UPnP-enabled router (or have UPnP
control disabled for the router), you can still use direct remote viewing, but only if you manually configure your
router.
If there are multiple routers, hardware firewalls and software firewalls in between the PC running WiLife
Command Center and the Internet, then they all must be configured to allow the traffic needed for direct
remote viewing. If your setup doesn't allow direct remote viewing, you will still be able to use relay remote
viewing.
When viewing video remotely, your system at the remote location might also need to be configured to allow the
remote video stream, especially if there is a hardware or software firewall in between the remote client and the
Internet.
There are no inbound traffic requirements, but there are some outbound traffic requirements (usually most
firewalls don't block outbound traffic). In addition, streaming video may also be blocked in some business
settings. So check with your network administrator.
Remote Viewing Web Client to Internet
Description
Relay Mode Remote Viewing
Direct Mode Remote Viewing

Ports Required
TCP: 80, 443, 554, 1755 (outbound)
TCP: 80, 443, 20570-20575 (outbound)
(or other custom direct mode port)

Network
Internet
Internet

By design, firewalls and Internet filters attempt to control communications on both the internal camera network
and your Internet connection. This is not a problem if you configure them correctly. Remember, it is common to
have more than one software firewall installed on a PC. A router also acts as a hardware firewall in between
the PC and the Internet.
Note that the outbound requirements to the Internet would mean that any software firewalls would have to
allow the traffic, as well as any and all hardware firewalls and routers on the way from the PC to the Internet.
Outbound traffic to the Internet, in general, is usually not blocked, especially for home users. (In fact, most
consumer routers don't let you configure outbound firewall rules other than filtering out specified IP addresses
or ports). However, in a corporate or business environment, it is possible that outbound traffic is blocked
except for specified ports.

110

Configuring Your Firewall

User Guide

Microsoft Firewall
Microsoft Firewall is a standard component for Windows XP, Service Pack 2 (SP2). Microsoft does a good job of
automatically asking users to allow Command Center to access the network. This automatic configuration
method is sufficient in most cases. Here we provide you with instruction for both the automatic and manual
configuration methods.

ENABLE COMMAND CENTER AUTOMATICALLY
When you first start Command Center, Microsoft Firewall will
automatically provide you with a Windows Security Alert, asking you
whether you want to block Command Center. You should always
choose Unblock when the program name is Command Center and
the publisher is WiLife.

ENABLE COMMAND CENTER MANUALLY
In some cases, Windows may not provide you with the automatic alert or you may mistakenly choose to block
Command Center. In these and other cases, you need to configure the firewall rules manually.
Follow these step-by-step instructions:
1) Open the Control Panel from the Start menu.
Next, open the Windows Firewall using one of the two examples below:
From Category View, pick Network and Internet Connections and then Windows Firewall.

In the Classic View, choose Windows Firewall.

111

Configuring Your Firewall

User Guide

If the Windows Firewall is enabled (On), select the Exceptions tab. On the Exceptions tab, check the
Command Center box to enable it for network communications. Next, click on the Edit button.

If you do NOT see Command Center in the Programs and Services list (rare), you will need to choose
Add Program… and find Command Center either in the list of programs or Browse to it at “C:\Program
Files\WiLife\Command Center.exe.

From the Edit a Program dialog, click the “Change scope…” button and then select the option “Any
computer” as shown. Finally, click OK to close each dialog.

Remember that you may have more than one firewall application running on your PC. You will need to
configure each one.

112

Configuring Your Firewall

User Guide

Norton Internet Security 2001 - 2005
Norton Firewall is a component of several Symantec security
products including Norton Internet Security, Norton Personal
Firewall, Symantec Client Security, and others. In most cases,
Norton will automatically recognize that Command Center is
attempting to access the network. It will display a quick
configuration dialog. You must follow all of these steps to
ensure Norton 2001-2005 will not block Command Center!
1) Run Command Center to allow Norton to display
Program Control dialog.
If Norton displays the Program Control dialog, choose “Permit Always”. In
any case, continue to the next steps.
Open “Norton Internet Security” from the system tray (shown) or from the
Start…All Programs menu.
On the Norton Internet Security management screen, click Personal
Firewall. (Note: the dialog may look different depending on your version of
Norton.) Next, click the Configure button under the Personal Firewall
section.

From the Personal Firewall page, click Programs tab. In the Manual Program Control window, scroll
down until you find Command Center. Here you need to set the Internet Access to “Permit All”.

113

Configuring Your Firewall

User Guide

If you do NOT find Command Center in the Program list (rare), you will need to click the Add button. On
the program dialog, enter the file name “c:\Program Files\WiLife\Command Center.exe” and click
Open. Now repeat the previous step.

Finally, click on the Advanced tab and then the GENERAL button. On the General Rules Screen, scroll
down to the rule “UPNP Port 1900 Block Rule.”
Click on the Modify button and change the rule from Block to Permit. Leave the rule checked and then
click OK to accept the change.

You have now successfully configured Norton Firewall, but remember that you may have more than
one firewall application running on your PC. You need to disable or configure each one.
Finally, you may need to exit Command Center (from the task icon) and restart for the changes to take
effect.

114

Configuring Your Firewall

User Guide

Norton Personal Firewall 2006
Norton Personal Firewall 2006 is a component of several
Symantec security products that include Norton Internet Security,
Norton Personal Firewall, Norton AntiVirus, Symantec Client
Security, and others.
While you are installing Command Center, Norton Internet
Security will automatically recognize Command Center
attempting to access the network. It will prompt you with this
Security Alert.
Leave the setting as “Always allow connections from this program on all ports.”
Click OK.
Norton Internet Security will also recognize that Command Center
is attempting to access the Internet. It will prompt you with this
Program Alert.
Leave the setting as “Allow always” and click OK.

Validate the Setup
We expect these settings will configure Command Center completely for Norton 2006. However, we
recommend that you follow these steps to ensure the settings are accurate:
1) Open “Norton Internet Security” from the system tray
(shown) or from the Start…All Programs menu.
2) On the Norton Internet Security management screen,
click Personal Firewall.
3) Click the Configure button under the Personal Firewall
section.
4) From the Personal Firewall page, click Programs tab.
5) In the Manual Program Control section, scroll down
until you find Command Center.
6) Here you need to set the Internet Access to “Permit
All.”
7) Click OK.
NOTE: IF YOU DO NOT FIND COMMAND CENTER IN THE PROGRAM LIST (RARE), YOU WILL NEED TO
CLICK THE ADD BUTTON.
ON THE PROGRAM DIALOG, ENTER THE FILE NAME “C:\PROGRAM FILES\WILIFE\COMMAND
CENTER.EXE” AND CLICK OPEN.
NOW REPEAT THE PREVIOUS STEP.

115

Configuring Your Firewall

User Guide

You have now successfully configured Norton Firewall
2006.
Note: If you may have more than one firewall
application running on your PC, you need to disable or
configure each one to run with Command Center.

Norton Internet Security 2007
Depending on the version and installation options, Norton Internet Security 2007 may not automatically
request your permission to Allow the WiLife Command Center (werks.exe) access to the network and cameras.
You may need to manually configure the firewall.
1.

After opening Norton, select the Internet Security tab

2.

Click on Personal Firewall to see the options

3.

Click Configure to open the configuration page

116

Configuring Your Firewall
4.

User Guide

Click the Add button to add the WiLife Command Center (werks.exe) to the program list.

5.
Add Werks.exe to the programs list with Allow set as the access option. Typically Werks.exe is installed
at c:\program files\WiLife Command Center\Werks.exe.
6.

Click Apply to save your change and OK to close the windows.

117

Configuring Your Firewall

User Guide

Norton AntiVirus 2007
The Norton AntiVirus firewall has an aggressive worm protection feature that blocks Command Center from
giving the cameras a DHCP address when you install Command Center Version 1.5. Even if you have set
AntiVirus to allow Command Center, AntiVirus still blocks that traffic. These instructions assist you in
temporarily disabling Worm Protection until the WiLife Cameras have received an address.
Note: This will affect you when you update the firmware after installing Command Center version 1.5. (Version 1.4 is not
affected.)

1)

Open the Norton Protection Center and click on the Norton AntiVirus tab.

2) Click on the Settings option and click on “Internet Worm Protection.”

118

Configuring Your Firewall

User Guide

3) Click on the “Turn Off” button.

4) Click OK. Command Center only needs the feature turned off temporarily.

5) In the Command Center Software, open the Setup program, click on the Advanced tab, and click on
the Find My Cameras button. Follow the instructions of the Wizard. Your camera(s) should be located
and up and running within minutes.

119

Configuring Your Firewall

User Guide

Norton 360
1) Open Norton 360.

2) From the main screen, click on the menu option Tasks and Settings.

3) In the Settings section, click Change Advanced Settings.

120

Configuring Your Firewall

User Guide

4) Click on the Firewall Protection Settings.

5) On the Firewall Program Rules tab, scroll through the list of Programs and find the WiLife Command
Center.
6) Click on it so that it is highlighted. Then, in the Access dropdown field, select Custom.
7) Click Modify… so you can update the Program Rules with these connection settings:
Direction: In/Out
Computer: Any

121

Configuring Your Firewall

User Guide

Communications: Any
Protocol: TCP and UDP.

8) After updating these settings, click Ok.
9) Exit Norton 360.

122

Configuring Your Firewall

User Guide

ZoneAlarm Firewall
Zone Labs produces several computer security packages including ZoneAlarm Pro and ZoneAlarm. Though
there are differences in the UI, they are largely the same. Like other PC firewall products, Zone Labs provides
both automatic and manual configuration interfaces. By default, ZoneAlarm will automatically prompt you to
allow Command Center.exe to both access the Internet and to act as a server. Follow these instructions to
ensure ZoneAlarm does not interfere with the operation of WiLife.

ENABLE COMMAND CENTER AUTOMATICALLY
When you first start Command Center, Zone Alarm will automatically provide you with a ZoneAlarm Security
Alert, asking you whether you want to block Command Center. You should always choose Allow when the
program name is Command Center.exe and the publisher is WiLife.
1) Run Command Center.
Check “Remember this setting” and click the Allow button on both the “New Program” and “Server
Program” dialogs.

ENABLE COMMAND CENTER MANUALLY
In some cases, you may need to manually configure ZoneAlarm. This process is not difficult. Follow these steps
to complete the manual firewall setup:
1) Open the ZoneAlarm control center either from the Start menu or by right-clicking on the ZoneAlarm
icon in the Windows Task bar.

123

Configuring Your Firewall

User Guide

On the ZoneAlarm Control page, click the Program Control option to show the Program Control Page.
Then click the Programs tab and scroll down to the Command Center program. Set each Access and
Server option to Allow (as shown).

If you do NOT find Command Center listed as a program, you will need to click the ADD button to
manually add Command Center to the list. In the Add Program dialog, enter the path to Command
Center, which by default is “C:\Program File\WiLife\Command Center.exe”. Click OPEN and repeat the
prior step.

You have now successfully configured ZoneAlarm, but remember that you may have more than one
firewall application running on your PC. You need to disable or configure each one.
Finally, you may need to exit Command Center (from the task icon) and restart for the changes to take
effect.

124

Configuring Your Firewall

User Guide

McAfee Security Center
All users with the McAfee Security Center running on their PC must follow these instructions in order for the
WiLife Command Center to run. Even if you accept to “Allow” WiLife network access at installation time, the
McAfee Security firewall will block your cameras.
Follow these instructions to ensure access.
1) Open McAfee Security Center.

2) On the Home window, click on the option "Internet & Network" and then click the Configure button.
The Internet & Network Configuration window displays.

3) Click on the Firewall Protection is Enabled option and then click on the Advanced... button.

125

Configuring Your Firewall

User Guide

4) In the Firewall panel, select the option "Program Permissions."
5) In the Program Permissions panel, locate the WiLife Command Center program name and highlight it.
If it is highlighted, details about the program will display in the Program Details panel, as shown in the
graphic above. In the Action panel, click the option "Grant Full Access."

6) From the Firewall panel, click on the option "System Services."
7) In the System Services panel, locate the option "Universal Plug and Play (UPNP) Port 5000" and click
in the checkbox so that it is marked.
8) Click OK to save your options.
9) You have finished setting firewall configurations for McAfee Security Center. Close McAfee Security
Center.

126

Configuring Your Firewall

User Guide

McAfee Personal Firewall
McAfee distributes its firewall product in several packages including Internet
Security Suite, Personal Firewall Plus, and Desktop Firewall. Though there are
differences in the UI, they are largely the same. Like other PC firewall products,
McAfee provides both automatic and manual configuration interfaces. By
default, Personal Firewall will automatically prompt you to allow Command
Center.exe to access the Internet. Follow these instructions to ensure the
McAfee firewall does not interfere with the operation of WiLife.

ENABLE COMMAND CENTER AUTOMATICALLY
When you first start Command Center, McAfee Firewall will automatically
provide you with a security notice, asking you whether you want to Grant or
Block Internet access. You should always choose GRANT ACCESS when the
program name is Command Center.exe.
1) Run Command Center
2) Check “Remember this setting” and click the Allow button on both the “New Program” and Server
Program dialogs

ENABLE COMMAND CENTER MANUALLY
In some cases, you may need to manually configure the firewall. This process is not difficult. Follow these steps
to complete the manual firewall setup:
1) Open the McAfee Security Center either from the Start menu or by right clicking on the McAfee icon in
the Windows Task bar.

2) On the McAfee Security Center page, click the Personal Firewall Plus tab to show the Firewall Control
Page. Next click the “View the Internet Application List” to show a list of managed programs.

3) From the Internet Applications page, click the “New Allowed Application” link to open the Select
Application dialog. Now enter “C:\Program Files\WiLife\Command Center.exe” in the File name field,
and click Open.

127

Configuring Your Firewall

User Guide

4) Finally, you can confirm that Command Center is in the Internet Applications list and marked as “Allow
Full Access” along with other networked applications.

5) You have now successfully configured McAfee, but remember that you may have more than one
firewall application running on your PC. You need to disable or configure each one.
6) Finally, you may need to exit Command Center (from the task icon) and restart for the changes to take
effect.

128

Configuring Your Firewall

User Guide

BlackICE Firewall
BlackICE is the least friendly of all the firewalls we review here. There are two common implementations of
BlackICE: those that have purchased a retail copy of PC Protection Firewall for personal use and those that
unknowingly have a copy installed along with either software from an ISP, VPN, or other source. The primary
difference between the two is this: The retail (full package) version of BackIce includes a user-interface for
making changes. Copies installed with other software have no user interface and require editing a file in order
to unblock traffic.
Unlike most firewalls, BlackICE does NOT automatically prompt users for permission to allow Command Center
to access the cameras and Internet.

ENABLE COMMAND CENTER WITH BLACKICE UI
If you have the full retail version of BlackICE you will have access to its somewhat crude user interface (UI). If
you do not have access to the UI, jump forward to the section on Enabling Command Center with BlackICE
Options File.
Follow these instructions when using the BlackICE UI:
1) Open the BlackICE Advanced Firewall Settings dialog by right clicking on the BlackICE icon in the task
tray (as shown).

2) On the Advanced Firewall Settings dialog, click the Add button. Next, enter the values shown (Name:
UPnP; IP Address: 169.254.0.0-169.254.255.255; Check All Ports; Type:UDP; Mode: Accept; Duration
of Rule: Forever) and click Add.

129

Configuring Your Firewall

User Guide

3) Click the Add button again. Enter the values shown: (Name: UPnP; IP Address: 172.29.0.0172.29.255.255; Check All Ports; Type:UDP; Mode: Accept; Duration of Rule: Forever) and click Add.
4) Click the Add button again. Enter the values shown: (Name: DHCP; IP Address: All Addresses; Port: 67;
Type: UDP; Mode: Accept; Duration of Rule: Forever) and click Add.

5) Click OK to close each of the open dialogs.

6) You have now successfully configured BlackICE, but remember that you may have more than one
firewall application running on your PC. You need to disable or configure each one.
7) Finally, you will need to exit Command Center (from the task icon) and restart.

ENABLE COMMAND CENTER WITH BLACKICE OPTIONS FILE
If you do not have the BlackICE user-interface (UI), you need to edit the BlackICE Options file. Follow these
instructions to update the file:

130

Configuring Your Firewall

User Guide

1) Open an explorer window by clicking on the My Computer icon and change directories to c:\program
files\ISS\BlackICE.
2) Open the file firewall.ini with Notepad by double-clicking on the file.

3)

Find the [Manual UDP low REJECT] section and add these lines:
ACCEPT, 169.254.0.0 – 169.254.255.255, 0 – 65536, UPnP, 2005-10-05, 02:44:06, PERPETUAL, 2000, unknown
ACCEPT, 172.29.0.0 – 172.29.255.255, 0 – 65536, UPnP, 2005-10-05, 02:44:06, PERPETUAL, 2000, unknown

4) Save and close Notepad.
5) Finally, shutdown and restart your computer in order for these changes to take effect.

131

Configuring Your Firewall

User Guide

Windows Live OneCare
If your PC is running the Windows Live OneCare firewall, your Command Center system may not be displaying
video, even if you placed Command Center on the Allow List. If Command Center is not displaying video, follow
these instructions to resolve it:
1. Open the Windows Live OneCare system. The Common Tasks screen displays, as shown in this graphic.

2. Click the option “View or change settings.” (See red arrow.)
3. With the Settings window open, click on the Firewall tab and then click Advanced Settings, as shown in the
graphic below.

132

Configuring Your Firewall

User Guide

4. Click on the Ports and Protocols tab.

5. In the Ports and Protocols section, locate the “Universal Plug and Play – Xbox 360 (UDP 1900) checkbox
and select it so that it is marked. Then, hit the Apply button.
The video from your cameras should show up in Command Center shortly after this.

133

Configuring Your Firewall

User Guide

Turning Off Spam Blocking for WiLife E-mails
If you are not receiving WiLife alert e-mails, it may be due to your e-mail service blocking the e-mails because it
considers them to be spam. Locate and open the SPAM folder (or Junk E-Mail, Bulk, or a similar name), if you
feel that our e-mails are being blocked.
Note: If our alert e-mails are not appearing in these locations, contact your provider to troubleshoot further.
We’ve included instructions for some of the more popular e-mail systems. These instructions assist you with
unblocking WiLife alert e-mails.
Unfortunately, these instructions do not cover every e-mail service. If your e-mail provider is not listed below,
google your mail service on an Internet browser and locate spam options in the Help or Options documentation
on the e-mail provider’s website.

AOL (AIM)
AOL places SPAM and junk mail automatically in the “SPAM” folder.
If WiLife alert messages get placed in the SPAM folder, you can move them to the Inbox by clicking on the
checkbox next to the alert message, and then clicking on the “This is Not Spam” button at the top of the
message list.

EarthLink Total Access and Web Mail
Both Total Access and Web Mail use EarthLink’s spamBlocker tool. When this is activated, spam e-mail is
placed in either the “Known Spam” or “Suspect E-mail” folders.
If WiLife alert messages get placed in either of these folders, they can be easily accepted as non-spam by
opening either folder, clicking in the checkbox next to the alert message, and going to the Checked Items
dropdown field and selecting the option “Move to Inbox & Add Contact.”

EarthLink 5.0
EarthLink has two spam filter options available for 5.0-- Standard Spam Sentry Junk Mail Filter and Aggressive
Spam Sentry Junk Mail Filter.
With Standard Spam Sentry Junk Mail Filter activated, EarthLink places SPAM in the “Junk Mail” folder.
If WiLife alert messages are not displaying in the Inbox, check the “Junk Mail” folder. To get alert messages to
display in the Inbox, add the outgoing mail server name (i.e. smtp.wilife.com) to your Address Book.
If you are not receiving any alert messages, and you don’t see a Junk Mail folder, your spam filter may be set to
“Aggressive Spam Sentry Junk Mail Filter.” Any mail sent to you that is not from e-mail addresses in your
address book is immediately destroyed. You won’t ever know the mail was sent to you.

HotMail
HotMail places SPAM in the "Junk" folder. Spam filtering is automatic. All spam-possible e-mail is automatically
sent to the Junk E-Mail folder, where it is automatically deleted after 5 days.
To set HotMail so that it sends WiLife alert mail to the Inbox folder in the future, you can complete one of these
two tasks:
1. Click Options > Mail and Junk e-mail > Allowed and Blocked Senders > Allowed Senders. In the field
“Sender or domain to allow:”, type the outgoing mail server name (i.e., smtp.wilife.com). This server name is
the same one that you specified in the Setup > E-mail tab screen > Outgoing Mail Server field.
2. Open the Junk folder and open one of the WiLife alert e-mails. Click on the option “Allow Sender.”

134

Configuring Your Firewall

User Guide

Yahoo Mail
Yahoo Mail places SPAM in the “Bulk Mail” folder. Yahoo uses a mail filtering system called SpamGuard, which
is automatically activated. The Bulk Mail folder is generated when you receive your first message that appears
to be spam. Spam is automatically deleted after 30 days.
If a WiLife alert message is placed in your Bulk Mail folder, click on the "Not Spam" button while viewing that
message.

GMail
GMail places SPAM in the "Spam" folder. All SPAM is automatically sent to the Spam folder, where it is
automatically deleted after 30 days.
If an alert message is found in the Spam folder, click in the checkbox for the alert e-mail and click the “Not
Spam” button along the top of the spam list. You can also open the alert message and click the “Not Spam”
button at the top of the message. Unmarking messages moves them to your inbox.
To prevent WiLife alert e-mail from being marked as spam, add the outgoing mail server name (i.e.,
smtp.wilife.com) as a Contact. This server name is the same one that you specified in the Setup > E-mail tab
screen > Outgoing Mail Server field.
In the Contacts list, click Add Contact. GMail always delivers messages from your contacts.

Microsoft Outlook 2003
Outlook does not have built-in SPAM control, but it can automatically block messages from appearing from
specific addresses by adding these addresses to its "Junk Senders" list.
To Unblock WiLife alert messages or to add a sender to your Safe Senders List, right-click on an alert message.
Click either Add Sender to Safe Senders List.

Microsoft Outlook Express 6
Outlook Express 6 does not have built-in SPAM control, but it can automatically block messages from
appearing from specific addresses. To Unblock WiLife alert messages, choose Tools > Message Rules >
Blocked Senders List.
Scroll through the list that appears and highlight the address representing the Outgoing Mail Server name that
you specified for Command Center alert messages (i.e. smtp.wilife.com). Then, click the Remove button, then
OK.

Eudora
Eudora places SPAM in the "Junk" folder. They call their filtering feature "Spamwatch."
To tell Eudora not to send WiLife alert mail to the Junk folder, highlight the message found in the Junk folder,
and choose “Not Junk” from the Message menu. In time, Eudora will learn that these alert messages are not
junk and will not place them in the Junk mailbox.

Mozilla Thunderbird 1.5
Mozilla Thunderbird places SPAM in the "Junk Mail" folder.
To tell Thunderbird to not send WiLife alert mail messages to the Junk folder in the future, highlight the WiLife
alert e-mail and click the “Not Junk” button in the toolbar. You can also use the keyboard keys [Ctrl] + J or
choose “Mark As Not Junk” from the Message menu.
If Thunderbird continues to consider messages from WiLife to be Junk Mail, add the outgoing mail server name
(i.e., smtp.wilife.com) to the Address Book. This server name is the same one that you specified in the Setup >
E-mail tab screen > Outgoing Mail Server field.
By default, addresses in the Address Book are not considered Junk Mail.

135

Configuring Your Firewall

User Guide

Opera M2
Opera M2 places SPAM in the “Spam” folder. To access e-mail messages in this view, toggle the Hotlist by
pressing F4, and double-click on "Spam."
To get a WiLife alert message out of this folder, right-click on the alert message and then select the "Not Spam"
option. You can also highlight the message and then select the “Not Spam” button (or highlight the message
and press “A”). This will add the sender to your contacts list so future messages from that e-mail address will
not be sent to the "Spam" folder.

136

A

Configuring Your Firewall

User Guide

Specifications
System Computer Requirements
WiLife requires these requirements for proper operation. Additionally, we recommend a more powerful
machine to achieve the best results.
Number of Cameras

Requirement
1

2

3

4

5

6

2.2 GHz

2.4 GHz

2.6 GHz

298 GHz

3.0 GHz

3.2 GHz

Memory (MB) **

512

512

512

768

1024

1024

Video Card (MB)

32

32

64

128

128

256

CPU Speed*

Display Resolution:
Hard Drive (MB):

1024 x 768 or higher, 32 bit color
150 MB for program and a minimum of 10 GB for video recording

Operating System:

USB:

Microsoft® Windows® Vista;
Microsoft® Windows® XP Home Edition,
XP Professional, or XP Media Center Edition
One available USB 1.1 or 2.0 port (2.0 recommended)

Media Player:

Microsoft® Windows® Media Player 9 or later

* Intel® Pentium 4 CPU speed. Dual-core and AMD processors deliver similar performance at lower clock
speeds.
** Microsoft Vista requires more memory to deliver equal performance.

Online Viewing Requirements
WiLife provides for remote viewing using Windows Mobile cell phones and handhelds, and Web Browsers.

CELL PHONES & HANDHELDS
WiLife is compatible with a wide range of Microsoft Windows Mobile cell phones and wireless handhelds. Of
course, these devices require Internet access either through a cell service provider or wireless Internet hub,
depending on your device.

Examples of Compatible Cell Phones:
Anextek SP230

Palm Treo 700w

Audiovox PPC 6601; SMT 5600; PPC 4100;

Motorola Q; CN620; Motorola MPx, MPx100 & MPx220;

HP iPAQ hw6500 series

Samsung SCH-i730

iMate SP5; SP5m; K-JAM; JASJAR

Siemens SX66

137

Specifications

User Guide

Example Wireless Handheld Devices:
Asus MyPal A730W

HP iPAQ hx2400 series; hx2700 series; hx3700 series; hx4700 series

Dell Axim X51v; X50v; X30v

Toshiba e805

BROWSER
Common Requirements

Windows Media Player 9 or later

Browsers

Microsoft Internet Explorer Version 5.5 or later

DVC-810i Indoor Camera
INDOOR CAMERA FEATURES
Processing Power

400 MHz DSP

Onboard Image Encoding

Windows® Media Video 9

Onboard Image Processing

Motion detection up to 16 zones, Auto brightness,

Resolution

Selectable: 320 X 240 or 640 X 480 pixels

Frame Rate

Selectable: 5, 10 or 15 frames/second

Bit Rate

Selectable: 150, 400 and 750 kbps

Color Depth

10 bits

Lens
Focus

User-adjustable

Viewing Angle

80° (diagonal)

Pan Angle

50° (manual)

Firmware Updates

Selectable: Manual or Automatic

Communications (to power supply)

Ethernet; TCP/IP

Power Consumption

15 Watts

OPERATING ENVIRONMENT
The DVC-810i Camera meets requirements for indoor use and is not qualified for outdoor or other extreme
environments.
Temperature Range
Operating

+32°F to +93°F (0°C to +34°C)

Storage

-4°F to +140°F (-20°C to +60°C)

Humidity (storage and operating)

5% to 90% (relative; non-condensing)

Voltage

102 - 132 Volts AC, 60 Hz

Power supply to Camera cabling
Included cable

CAT-5e, RJ-45 connectors, 10 feet (3 m)

User provided requirements

CAT-5e or better, RJ-45 connectors, up to 80 feet (24 m)

Connector pin out

Per IEEE 802.3

Illumination

2 lx minimum per IEC 61146-1

138

Specifications

User Guide

Property Size

Up to 8,000 square feet

PHYSICAL METRICS
Power Consumption

15 Watts

Camera Body Dimensions

Height: 5.0 inch (12.7 cm); Width 3.2 inch (8.1 cm); Depth: 1.8 inch
(4.6 cm)

Camera Weight

6.7 oz (190 g)

Power Supply Dimensions

Height: 3.8 inch (9.7 cm); Width: 2.9 inch (7.4 cm); Depth: 2.6 inch
(6.6 cm)

Power Supply Weight

5.6 oz (160 g)

DLC-810e Outdoor Camera
OUTDOOR CAMERA FEATURES
Processing Power

400 MHz DSP

Onboard Image Encoding

Windows® Media Video 9

Onboard Image Processing

Motion detection up to 16 zones, Auto brightness,

Resolution

Selectable: 320 X 240 or 640 X 480 pixels

Frame Rate

Selectable: 5, 10 or 15 frames/second

Bit Rate

Selectable: 150, 400 and 750 kbps

Color Depth

10 bits

Lens
Focus

Preset

Viewing Angle

80° (diagonal)

Pan Angle

50° (manual)

Firmware Updates

Selectable: Manual or Automatic

Communications (to power supply)

Ethernet; TCP/IP

Power Consumption

15 Watts

OPERATING ENVIRONMENT
Temperature Range
Operating

0° to 111° F (-18° to 44° C)

Storage

-4°F to +140°F (-20°C to +60°C)

Humidity (storage and operating)

5% to 95% (relative; non-condensing)

Voltage

85 - 265 Volts AC, 45 to 66 Hz

Property Size

Up to 8,000 square feet

PHYSICAL METRICS
Power Consumption

20 Watts

Camera Body Dimensions

Height: 2.0 inch (50 mm); Width 4.72 inch (120 mm); Depth: 8 inch
(200 mm)

139

Specifications

User Guide

Camera Weight

1.1 lb (500 g)

DLC-810c Spy Camera
SPY CAMERA FEATURES
Processing Power

400 MHz DSP

Onboard Image Encoding

Windows® Media Video 9

Onboard Image Processing

Motion detection up to 16 zones, Auto brightness,

Resolution

Selectable: 320 X 240 or 640 X 480 pixels

Frame Rate

Selectable: 5, 10 or 15 frames/second

Bit Rate

Selectable: 150 - 800 kbps

Color Depth

10 bits

Lens
Focus

Preset

Viewing Angle

80° (diagonal)

Pan Angle

50° (manual)

Firmware Updates

Selectable: Manual or Automatic

Communications (to power supply)

Ethernet; TCP/IP

Power Consumption

15 Watts

OPERATING ENVIRONMENT
The DVC-810i Camera meets requirements for indoor use and is not qualified for outdoor or other extreme
environments.
Temperature Range
Operating

+32°F to +93°F (0°C to +34°C)

Storage

-4°F to +140°F (-20°C to +60°C)

Humidity (storage and operating)

5% to 90% (relative; non-condensing)

Voltage

120 -240 Volts AC, 50/60 Hz

Power supply to Camera cabling
Included cable

CAT-5e, RJ-45 connectors, 10 feet (3 m)

User provided requirements

CAT-5e or better, RJ-45 connectors, up to 80 feet (24 m)

Connector pin out

Per IEEE 802.3

Network

Ethernet, TCP/IP

Illumination

2 lx minimum per IEC 61146-1

Property Size

Up to 8,000 square feet

PHYSICAL METRICS
Power Consumption

15 Watts

Camera Body Dimensions

Height: 4.0 inch (11 cm); Width 6 inch (15 cm); Depth: 2 inch (4.5
cm)

Camera Weight

1 lb (453 g)

140

Specifications

User Guide

Powerline Networking
WiLife uses powerful power-line networking technology to allow users to easily install and setup your
surveillance system.
Networking specification

HomePlug® Power-line 1.0

Data Rate

14 Mbps (maximum), 5 Mbps (typical)

Data Encryption

56 bits (standard DES)

Security Key

Coded user defined password

Networking protocol

TCP/IP

Camera discovery

Universal Plug and Play (UPnP)

IP Address Space

169.254.0.1 – 169.254.255.255, Mask 255.255.0.0

141

Specifications

User Guide

Wall and Ceiling Mount Installation
Installing the WiLife Camera Wall and Ceiling Mount is simple. Use the recommended tools and drilling
template below. As always, use caution to avoid injury.
Recommended tools: Screwdriver, electric drill.

Surface

Pilot Hole Drill Size

Pilot Hole Depth

Softwood

1.6 mm (1/16”)

1.2 cm (1/2"0

Hardwood

2.0 mm (5/64”)

1.2 cm (1/2")

Wallboard (use anchor)

5.0 mm (3/16”)

2.3 cm (7/8”)

Pre-drill pilot holes before securing the camera to the surface. For soft, hollow surfaces such as wallboard,
sheet rock and drywall, use the provided plastic anchors.

WALL MOUNTING DRILLING TEMPLATE

Drill Holes in
These Positions

The illustration is drawn to a one-to-one scale, which means it provides the exact dimensions required to
mount the unit.

142

B

License and Warranty

User Guide

Software License and Hardware Warranty
Command Center Software License
NOTICE TO USER: BE SURE TO CAREFULLY READ AND UNDERSTAND THIS END-USER LICENSE AGREEMENT
(“EULA”) BEFORE YOU INSTALL OR USE ANY WILIFE SOFTWARE, FIRMWARE, OR RELATED DOCUMENTATION.
BY INSTALLING OR USING ALL OR ANY PORTION OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF
EACH OF THE TERMS OF THIS LICENSE. YOU AGREE THAT THIS LICENSE WILL BE A LEGALLY BINDING AND
ENFORCEABLE CONTRACT LIKE ANY WRITTEN AGREEMENT SIGNED BY YOU. THESE TERMS APPLY TO YOU AND
TO ANY FUTURE USER OF THIS SOFTWARE. IF YOU DO NOT AGREE, (A) DO NOT INSTALL OR USE THE
SOFTWARE AND (B) RETURN THE COMPLETE PACKAGE WITH PROOF OF PURCHASE, INCLUDING ALL
COMPONENTS, DOCUMENTATION AND ANY OTHER MATERIALS PROVIDED WITH THE PRODUCT, TO YOUR
POINT OF PURCHASE.
SOFTWARE LICENSE
1. DEFINITIONS. "Software" means all of the contents of the associated media, electronic documentation, and
any updates for revisions to the same. "Use" or "Using" means to install, access, copy or otherwise benefit from
using the functionality of the Software. “Product” means the combination of WiLife Software and WiLife
Cameras. "WiLife" means WiLife Incorporated, a Delaware corporation, 132 East 13065 South, Suite 150,
Draper, Utah, 84020.
2. CONDITIONS OF LICENSE. This EULA comes with the following conditions.
You shall not alter or modify the Software or create a new installer for the Software.
You shall not copy the Software except as described below for backup purposes.
You shall not reverse engineer, decompile, disassemble or otherwise attempt to discover the source
code, algorithms, or architecture of the Software.
You shall not export the Software or Product in violation of United States export laws.
Using the Product for illegal purposes or intentionally using the Product contrary to community
standards is expressly prohibited.
WiLife reserves the right to modify, upgrade, and replace the Software by offering new software with or
without charge, at WiLife’s option.
3. GRANT OF LICENSE. This EULA grants the owner the following rights.
You may Use one copy of the Software on a single computer.
You may transfer the Software (including all documentation) to another party, provided that the other
party shall be bound by all of the terms of this agreement and you uninstall your copy of the Software.
You may make one backup copy of the Software.
Use of other services accessible through the Software is not covered by this EULA and may be
governed by separate terms and conditions.
4. OWNERSHIP and COPYRIGHT. The Software, including all Copyrights, Trademarks, Patents, and trade
secrets are the intellectual property of WiLife and are owned by WiLife and its suppliers. Additionally, the
source code, architecture, designs, and models used in the design and development of the Software and
Product are the intellectual property of WiLife and its suppliers. Together they are protected by copyright laws
and international treaties. WiLife reserves all of its rights not expressly granted herein.
5. LIMITED WARRANTY. WiLife Warrants that the media on which the Software is provided shall be free from
material defects for a period of ninety (90) days from date of purchase. WiLife and its suppliers provide the
Software "AS IS." WILIFE AND ITS SUPPLIERS DO NOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY

143

License and Warranty

Command Center User Guide

OBTAIN BY USING THE SOFTWARE. FURTHER, WILIFE MAKES NO REPRESENTATION (EXPRESS OR IMPLIED) AS
TO MATTERS OF NONINFRINGMENT, CONDITION OF TITLE, MERCHANTABILITY, INTEGRATION, SATISFACTORY
QUALITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. WILIFE PRODUCTS AND SOFTWARE ARE DESIGNED
AND SOLD ONLY TO ASSIST WITH AUTOMATED MONITORING AND CONTROL. THEY ARE NOT A SECURITY
SYSTEM AND ARE NOT INTENDED TO WARN, NOTIFY, OR PROTECT AGAINST INTRUSION OR SERVE OTHER
SECURITY FUNCTIONS. WILIFE DISCLAIMS ANY LIABILITY THAT MAY ARISE FROM THE USE OR INABILITY TO
USE ITS PRODUCTS IN LIEU OF A SECURITY SYSTEM.
THE ENTIRE RISK ARISING OUT OF THE USE OR PERFORMANCE OF THE SOFTWARE IS WITH YOU.
7. LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW, YOU HEREBY RELEASE WILIFE AND ITS
SUPPLIERS FROM ANY AND ALL LIABILITY TO YOU FOR ANY DAMAGES, CLAIMS OF COST, OR ANY LOST
INCOME OR SAVINGS ARISING FROM OR RELATED TO THE SOFTWARE OR ITS USE. THESE LIMITATIONS AND
EXCLUSIONS APPLY TO THE EXTENT PERMITTED BY THE APPLICABLE LAWS. If you do not wish to accept the
Software under these terms, do not install the Software.
8. U.S. GOVERNMENT RESTRICTED RIGHTS. The Software, Product, and documentation are Commercial Items
and are provided with restricted rights. The Use by the U.S. Government is subject to the terms and conditions
stated herein.
9. GOVERNING LAW. This License and your rights regarding any matter it addresses are governed by the laws
of the State of Utah, without reference to conflict of laws principles. THIS LICENSE SHALL TERMINATE
AUTOMATICALLY if you fail to comply with the terms of this License.
10. QUESTIONS. If you have any questions regarding this license and its conditions, rights, warranties, or
limitations, contact WiLife Customer Support at [email protected] or 888-GOWILIFE (888-469-4543).

144

License and Warranty

User Guide

Limited Product Warranty
WiLife, Inc. ("WiLife") warrants to the original purchaser that its hardware products will be free from defects in
materials and workmanship for a period of one (1) year from the date of original purchase ("Warranty Period"),
as further described below.
If a valid claim is received by WiLife for a covered defect within the Warranty Period, at its option, WiLife will (1)
repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with
a product that is new or which has been manufactured from new or serviceable used parts and is at least
functionally equivalent to the original product. WiLife owns all parts removed from repaired products.
WiLife warrants replacement products or parts provided under this warranty against defects in materials and
workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the
original product's warranty, whichever provides longer coverage.
EXCLUSIONS AND LIMITATIONS
Software distributed by WiLife under the WiLife brand name is not covered under this Limited Warranty. Refer
to WiLife's Software License Agreement for more information.
WiLife is not liable for any damage to or loss of any programs, data, or other information stored on any media
used by our products. Recovery or reinstallation of programs, data or other information is not covered under
this Limited Warranty.
This limited warranty does not cover damage due to external causes, including accident, abuse, misuse,
problems with electrical power, servicing not authorized by WiLife, usage not in accordance with product
instructions, use in contravention of applicable laws and regulations, or if any WiLife serial number has been
removed or defaced.
TO THE MAXIMUM EXTENT PERMITTED BY MANDATORY PROVISIONS OF APPLICABLE LAW, THIS WARRANTY
AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED. WILIFE SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IF WILIFE CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED
WARRANTIES UNDER APPLICABLE LAW, THEN TO THE EXTENT POSSIBLE ANY CLAIMS UNDER SUCH IMPLIED
WARRANTIES SHALL EXPIRE ON EXPIRATION OF THE WARRANTY PERIOD. No reseller, agent, or employee is
authorized to make any modification, extension, or addition to this warranty.
WILIFE PRODUCTS ARE DESIGNED AND SOLD ONLY TO ASSIST WITH AUTOMATED MONITORING AND
CONTROL. THEY ARE NOT A SECURITY SYSTEM AND ARE NOT INTENDED TO WARN, NOTIFY, OR PROTECT
AGAINST INTRUSION OR SERVE OTHER SECURITY FUNCTIONS. WILIFE DISCLAIMS ANY LIABILITY THAT MAY
ARISE FROM THE USE OR INABILITY TO USE ITS PRODUCTS IN LIEU OF A SECURITY SYSTEM.
WILIFE PRODUCTS EMPLOY STANDARDIZED COMMUNICATIONS TECHNOLOGY INCLUDING WIRED AND
WIRELESS ETHERNET AND CELLULAR TELEPHONE COMMUNICATIONS. DEPENDING ON THE CUSTOMER'S USE
OF THE PRODUCTS, THEY MAY TRANSMIT DATA OR VIDEO OVER THE INTERNET OR BY CELLULAR TELEPHONY.
SUCH TRANSMISSIONS RELY ON SECURITY STANDARDS ADOPTED BY THIRD PARTIES INCLUDING THE
CUSTOMER'S OPERATING SYSTEM SOFTWARE PROVIDER, YOUR INTERNET SERVICE PROVIDER AND YOUR
CELLULAR SERVICE PROVIDER. WHILE INDUSTRY STANDARDS IN THESE TECHNOLOGIES ASSURE SOME
DEGREE OF SECURITY, THEY ARE NOT 100% SECURE AND THE DEGREE OF SECURITY MAY DEPEND ON THE
CUSTOMER'S PERSONAL CHOICES REGARDING SECURITY CONFIGURATIONS. ACCORDINGLY, WILIFE DOES
NOT ENSURE OR WARRANT THE SECURITY OF ANY DATA, INCLUDING VIDEO, TRANSMITTED BY OR THROUGH
ITS PRODUCTS AND THE CUSTOMER USES SUCH PRODUCTS AT HIS OR HER OWN RISK.
TO THE MAXIMUM EXTENT PERMITTED BY MANDATORY PROVISIONS OF APPLICABLE LAW, WILIFE IS NOT
RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY
BREACH OF WARRANTY OR CONDITION, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING ANY COSTS OF
RECOVERING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE WILIFE PRODUCT,
AND ANY FAILURE TO MAINTAIN THE CONFIDENTIALITY OF DATA.
FOR CONSUMERS WHO HAVE THE BENEFIT OF MANDATORY CONSUMER PROTECTION LAWS OR REGULATIONS
IN THEIR DOMICILE OF PURCHASE OR, IF DIFFERENT, THEIR DOMICILE OF RESIDENCE, THE BENEFITS

145

License and Warranty

Command Center User Guide

CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH
CONSUMER PROTECTION LAWS AND REGULATIONS. TO THE EXTENT THAT LIABILITY UNDER SUCH CONSUMER
PROTECTION LAWS AND REGULATIONS MAY BE LIMITED, WILIFE'S LIABILITY IS LIMITED, AT ITS SOLE OPTION
TO REPLACEMENT OR REPAIR OF THE PRODUCT.
OBTAINING WARRANTY SERVICE
Please review the customer support resources referred to in the accompanying documentation before seeking
warranty service. If the product is still not functioning properly after making use of these resources, access the
online website: www.wilife.com/support for instructions on how to obtain warranty service. If limited warranty
service is required, WiLife will issue a Return Material Authorization Number. You must ship the products back
to WiLife in their original or equivalent packaging, prepay shipping charges, and insure the shipment or accept
the risk of loss or damage during shipment. WiLife will ship the repaired or replacement products to you freight
prepaid if you use an address in the continental United States, where applicable. Shipments to other locations
will be made freight collect.

146

C

User Guide

Regulatory and Safety
Regulatory Information
RADIO FREQUENCY INTERFERENCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device must be installed and used in strict accordance with the manufacturer’s instructions as described
in the user documentation that comes with the product. Users of this equipment are cautioned that changes or
modifications to this equipment not expressly approved by WiLife Inc. void the user’s authority to operate this
equipment.

INDUSTRY CANADA NOTICE
Complies with IC: ICES-006 and ICES-003: en conformité avec IC: NMB-006 et NMB-003

LEAD CONTENT
This equipment complies with Sections 25249.5 – 25249.13 of the California Health and Safety Code. The
rubberized items of this equipment, which the user would come in frequent contact (cables/cords, suction
cups, etc.), have lead content no greater than 0.03% (300 ppm).

Safety Information
Please read the information in this section carefully and make sure you understand it completely. Make certain
that all warnings and instructions in this manual and marked on the system components are carefully followed.

CLEANING
Unplug this system from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning. Make certain the components are completely dry before inserting into the wall outlet after
cleaning.

147

Regulatory and Safety

User Guide

ELECTRIC SHOCK HAZARD
When properly installed and configured, the WiLife equipment is designed to protect users from exposure to
hazardous voltage levels. This system should only be operated from the type of power source indicated in this
guide and on the system’s label. If you are not sure of the type of power supplied to your home or building,
consult your local power company. There are no user serviceable components within any of the equipment
enclosures. Users should not attempt to repair WiLife equipment. Malfunctioning equipment should be
serviced using the guidelines found in this manual. If an enclosure does accidentally come open, remove the
power to the unit before handling it in any way.
Lightning also presents a real, but unlikely source of hazardous electric shock. As with all electrical equipment,
it is best to unplug the WiLife components during an electrical storm. This is especially recommended for
WiLife Cameras mounted on exterior windows. If the WiLife equipment is installed in an area subject to
frequent electrical storms, equipment damage and user exposure to hazardous voltages can be minimized by
the proper installation of lightning rods and lightning arrestors. Please contact a licensed electrician for further
assistance.
Unplug the system from the wall outlet and refer servicing to a qualified service facility under the following
conditions:
When the AC plug is damaged
If liquid has been spilled into the system
If the system has been exposed to rain or water
If the system does not operate normally by following the operation instructions
If the system has been dropped or the enclosure has been damaged
If the system exhibits a distinct change in performance
If the system emits smoke or odors
If the system emits any audible sound

PROTECTION AGAINST PHYSICAL SHOCK
Reasonable care should be taken to minimize the possibility of WiLife components experiencing physical
shock. Because of its many mounting configurations, the WiLife camera is particularly vulnerable to damage by
falling. Use the following guidelines to protect the WiLife Camera:
Do not place the camera in an area where it will be exposed to solvents, caustic gasses, or strong air
currents.
Do not place the camera in an area where it can become dislodged by bumping, knocking, striking, or
other physical forces.

WINDOW MOUNT (SUCTION CUPS)
Place suction cup only on a flat, clean, dry window, or glazed surface.
Ensure the camera cable is routed in such a way as to preclude its accidental pulling the camera off
the window.

DESKTOP/SHELF MOUNT
Place the mount on a stable, flat, clean, dry surface, well away from any edge.
Ensure the camera cable is routed in such a way as to preclude accidental pulling the camera off the
desk or shelf where it is placed.

WALL/CEILING MOUNT
Affix the mount to the wall or ceiling using the instructions provided in this manual.
Ensure the camera cable is routed in such a way as to preclude accidental pulling the camera off the
wall or ceiling.

148

Regulatory and Safety

User Guide

If, after falling, the camera exhibits degraded performance, has ceased operating, shows visible cracks or if
there is evidence that internal components have come loose, disconnect the camera from its cable and follow
the instructions in this manual for obtaining service repair.

EXPOSURE TO MOISTURE
The WiLife Indoor and Spy cameras are designed to be used only in dry, indoor environments. Do not use them
near water; for example, near a bath tub, washbowl, kitchen sink, or laundry tub, in a wet basement, or in or
near a swimming pool. Exposure to rain, mists, excessive humidity and liquid emersion will likely cause
significant degradation in system performance and utility. If any WiLife component has been exposed to
moisture, immediately unplug all components from power outlets and allow the components to dry completely
before attempting to reinstall the equipment. If, after drying, the system exhibits degraded performance,
disconnect the system from all power sources and follow the instructions in this manual for obtaining service
repair. The WiLife Outdoor Camera, on the other hand, is weatherproof and protected against water and
temperature extremes.

FIRE HAZARDS
Care should be taken to keep WiLife equipment and packing material away from open flames and
temperatures in excess of 34°C (93°F). Care should be taken to keep electrically conductive objects from
falling between the WiLife camera power supply and the WiLife HomePlug®/USB Bridge and the wall plug,
potentially shorting out the AC power and causing a fire. If the case of any WiLife equipment becomes open,
cracked or broken in any way disconnect the power source to the component and refer to the service repair
section of this manual.

SHARP EDGES
Under normal circumstances WiLife system components are safe to handle. If the WiLife components are
exposed to significant physical shocks, the WiLife enclosures could break open exposing sharp enclosure
edges and sharp internal component edges. In the event of enclosure breakage, carefully remove affected
components from their power source and follow the service procedures of this manual.

CHOKING, SUFFOCATION AND STRANGULATION HAZARDS
Care should be taken to keep WiLife equipment and packing material away from small children and persons
with diminished mental capability. Specifically, the camera lens might be unscrewed and accidentally
swallowed. The wall/ceiling mount screws and anchors could be accidentally swallowed. The WiLife cables
could also be accidentally swallowed or become wrapped about a neck. If the WiLife components are exposed
to significant physical shocks, the WiLife enclosures could break open and small internal components could
come loose and become a choking risk. Plastic packing material may present a suffocation hazard to small
children and persons with diminished mental capability. Please properly dispose of all packing material.

USE WITH THIRD PARTY DEVICES
Do not plug the WiLife cables into any device other than the intended WiLife components. Doing so could
damage the equipment and expose the user to fire and electrical shock hazards. The WiLife equipment is
specifically NOT compliant with “power over Ethernet” standards such as IEEE 802.3af.

VENTILATION
Keep the area around WiLife components free of materials that may obstruct airflow and proper ventilation of
the components. This system should never be placed near or over a hot radiator or heat register. This system
should not be placed in a built-in installation unless proper ventilation is provided.

ENVIRONMENTAL HAZARDS
Please properly dispose of WiLife packing materials. Cardboard, paperboard and plastic packing material can
be recycled. Please consult your local recycling center for details. Burning this material is not recommended as
it may release harmful chemicals into the environment.

149

Regulatory and Safety

User Guide

PROLONGED USE OF EQUIPMENT
As with all equipment, care should be taken to minimize the risk of repetitive motion injuries, muscle fatigue,
prolonged muscle inactivity and eye strain. Repetitive motion injuries may be caused by common WiLife
activities such as typing and computer mouse use. Avoid spending excessive time viewing live or recorded
video. Command Center software can be configured to notify you remotely when an event happens so constant
personal surveillance is unnecessary. Recorded playback can be time selected, skipped to or fast-forwarded to
quickly reach a point of interest. Make sure your PC workstation (including chair) is comfortably configured and
properly illuminated. Place your PC’s keyboard, mouse and display at a comfortable, strain minimizing height.
Adjust the brightness and contrast of your PC’s display to a comfortable level.

STATIC ELECTRICITY
All electronic equipment contains components that can malfunction, suffer reduced reliability or be damaged
in the presence of static electricity. While this equipment has been designed to minimize performance
degradation due to effects of static electricity, please use the following procedures when handling this
equipment:
Do not wear clothing that readily generates static electricity (synthetic materials generate large
amounts of static electricity). Cotton or cotton blend fabrics, for example, are good because they are
not as likely to store electrostatic charges.
Keep all plastic items away from any area where this equipment is handled. Any plastic item is a
potential static generator. This includes candy wrappers, foam cups, synthetic carpet, foam cushions,
etc.
Avoid activities that produce static such as wiping feet or putting on coats when in the vicinity of this
equipment.
Always discharge any static charge your body might have built up before touching any part of this
equipment. To do this, touch and hold a grounded metal object for a minimum of two seconds.
If storing this equipment for a prolonged period of time, return it to its original shipping container.
If this equipment ceases operation suddenly and static electricity exposure is suspected, unplug all
connections for at least five seconds and then reinstall these connections. If this does not restore equipment
operation, consult the troubleshooting section of this manual.

Use with Power Conditioning Equipment
The WiLife cameras and USB receiver should not be used with any type of power conditioning equipment such
as surge protectors (commonly found in ‘power strips’), AC line filters, AC line conditioners, voltage converters,
frequency converters, uninterruptible power sources (UPS), spike protectors, AC line voltage regulators and
motor-generator sets. Such equipment will likely block power-line network signals and render the WiLife system
inoperable.

Powerline Network Limitations
This equipment will not operate during a power outage.
For best performance, limit your HomePlug network to 15 total devices. The presence of electric motors,
fluorescent lights, halogen lamps, switching power supplies and dimmer switches on your network may
diminish HomePlug® network performance. Avoid the use of extension cords with your HomePlug® devices.
HomePlug® signals will not reliably pass through transformers or between different phases of a multi-phase
power circuit. Operation between two legs of split phase power circuit should be satisfactory. If you have any
questions about your specific electrical wiring topology, please consult a licensed electrician.
If your HomePlug®/USB Bridge is unable to connect to a WiLife Camera, or if camera performance is
unsatisfactory, try moving the camera’s power supply module to a different electrical outlet.
If you suspect non-WiLife equipment may be interfering with the operation of the WiLife system (i.e. the WiLife
system only operates when the other equipment is turned off) placing a low-pass power line filter between the
AC line and the non-WiLife equipment may resolve the problem.

150

Regulatory and Safety

User Guide

To protect your privacy, be sure to set a unique password via the WiLife software. Doing this encrypts your
camera data and makes the output unreadable by neighboring HomePlug® systems which may be able to
detect your signals.

151

User Guide

152

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close