Punto

Published on December 2016 | Categories: Documents | Downloads: 54 | Comments: 0 | Views: 516
of 298
Download PDF   Embed   Report

Comments

Content

Downloaded from www.Manualslib.com manuals search engine

Dear Customer,
Thank you for selecting Fiat and congratulations on your choice of a Fiat Punto.
We have written this handbook to help you get to know all your new Fiat Punto features and use it in the best possible
way.
You should read it right through before taking the road for the first time.

Y

ou will find information, tips and important warnings regarding the driving of your car to help you derive the
maximum from your Fiat Punto technological features.

Y

ou are recommended to read carefully the warnings and indications, marked with the respective symbols, at the end
of the page:
personal safety;
the car’s wellbeing;
environmental protection.

The enclosed Warranty Booklet lists the services that Fiat offers to its Customers:


the Warranty Certificate with terms and conditions for maintaining its validity
❒ the range of additional services available to Fiat Customers

Bestregards and good motoring!

This Owner Handbook describes all Fiat Punto versions. As a consequence, you should consider only the
information which is related to the engine and bodywork version of the car you purchased.

Downloaded from www.Manualslib.com manuals search engine

MUST BE READ!
REFUELLING

K

Petrol engines: only refuel with unleaded petrol with octane rating (RON) not less than 95.
Diesel engines: only refuel with diesel fuel conforming to the European specification EN590. Using other products or mixtures may damage the engine beyond repair and cause the forfeiture of the warranty
cover for caused damages as a consequence.

ENGINE STARTING
Petrol engines: make sure that the handbrake is engaged; set the gearshift lever to neutral; fully depress
the clutch without pressing the accelerator, then turn the ignition key to AVV and release it as soon as
the engine has started.
Diesel engines: turn the ignition key to MAR and wait for the Y and m warning lights to go off; turn
the ignition key to AVV and release it as soon as the engine has started.
PARKING ON FLAMMABLE MATERIAL



While working, the catalyst develops a very high temperature. Do not park the car over grass, dry leaves,
pine needles or any other inflammable materials: risk of fire.

RESPECTING THE ENVIRONMENT
A system for continuously monitoring emission system components to ensure greater environmental
protection is fitted in your car.

Downloaded from www.Manualslib.com manuals search engine

ELECTRICAL ACCESSORIES
If, after buying the car, you decide to add electrical accessories (that will gradually drain the battery), visit
a Fiat Dealership. They can calculate the overall electrical requirement and check that the car’s electric
system can support the required load.

CODE card
Keep the code card in a safe place, not in the car. You should always keep the electronic code written
on the CODE card with you in case you need to carry out an emergency start-up procedure.

SCHEDULED SERVICING
Correct maintenance of the car is essential for ensuring it stays in tip-top condition and safeguards its safety features, its environmental friendliness and low running costs for a long time to come.

THE OWNER HANDBOOK CONTAINS…
…information, tips and important warnings regarding the safe, correct driving of your car, and its maintenance. Pay particular attention to the symbols " (personal safety) # (environmental protection) ! (the
car’s wellbeing). Should the reconfigurable multifunction display show the message “See Handbook”, refer
to section “Warning lights and messages” in this Handbook.

Downloaded from www.Manualslib.com manuals search engine



CRUISE CONTROL ............................................................

86

INSTRUMENT PANEL .......................................................

6

CEILING LIGHTS..................................................................

89

SYMBOLS ...............................................................................

11

CONTROLS...........................................................................

91

THE FIAT CODE SYSTEM .................................................

11

INTERIOR FITTINGS...........................................................

93

CORRECT USE
OF THE CAR

DASHBOARD
AND CONTROLS

5

THE KEYS ..............................................................................

13

SUNROOF..............................................................................

96

IGNITION SWITCH............................................................

16

DOOR ....................................................................................

98

INSTRUMENTS .....................................................................

18

POWER WINDOWS .........................................................

100

DIGITAL DISPLAY................................................................

22

BOOT ......................................................................................

101

MULTIFUNCTION DISPLAY ............................................

24

BONNET ................................................................................

107

RECONFIGURABLE MULTIFUNCTION
DISPLAY .................................................................................

28

ROOF RACK/SKI RACK ....................................................

109

SEATS.......................................................................................

56

HEADLIGHTS........................................................................

111

HEAD RESTRAINTS ............................................................

59

ABS SYSTEM .........................................................................

113

STEERING WHEEL...............................................................

60

ESP SYSTEM ..........................................................................

115

REARVIEW MIRRORS .........................................................

60

EOBD SYSTEM .....................................................................

119

HEATING/CLIMATE CONTROL
SYSTEM ...................................................................................

SOUND SYSTEM ..................................................................

120

62

CELLULAR PHONE SET-UP..............................................

123

HEATING AND VENTILATION......................................

65

ACCESSORIES PURCHASED BY THE OWNER .........

125

MANUAL CLIMATE CONTROL SYSTEM ...................

68

“DUALDRIVE” ELECTRIC POWER
STEERING SYSTEM .............................................................

126

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

SAFETY
DEVICES

DASHBOARD ......................................................................

WARNING
LIGHTS AND
MESSAGES

DASHBOARD AND CONTROLS

AUTOMATIC TWO-ZONE CLIMATE
CONTROL SYSTEM (DUALZONE) ...............................

71

PARKING SENSORS ...........................................................

128

EXTERNAL LIGHTS.............................................................

78

AT THE FILLING STATION ..............................................

130

WINDOW WASHING ......................................................

81

PROTECTING THE ENVIRONMENT ............................

133

4

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

DASHBOARD

1. Side swivel vent - 2. Side fixed vent - 3. Oddment compartment - 4. Horn - 5. Instrument panel - 6. Central swivel
vent - 7. Central fixed vent - 8. Central controls - 9. Glovebox - 10. Hazard light switch - 11. Controls for heating,
ventilation and climate control - 12. Cigar lighter - 13. Ashtray - 14. Ignition switch - 15. Steering wheel adjustment
lever - 16. Front passenger air bag - 17. Bonnet opening lever.

INDEX

F0I0098m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The presence and the position of the instruments and warning lights may vary according to the versions.

5

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

INSTRUMENT PANEL

SAFETY
DEVICES

Punto 1.28V - 1.3 Multijet versions
(A) - Fuel level gauge with reserve
warning light

CORRECT USE
OF THE CAR

(B) - Speedometer (speed indicator)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

(C) - Engine coolant temperature gauge
and excessive temperature
warning light

6

Downloaded from www.Manualslib.com manuals search engine

(D) - Digital display

F0I0246m

m c warning lights fitted on
1.3 Multijet version only

DASHBOARD
AND CONTROLS

ACTIVE, SOUND, DYNAMIC,
CLASS versions
(A) - Speedometer (speed indicator)

SAFETY
DEVICES

(B) - Fuel level gauge with reserve
warning light

(D) - Rev counter
(E) - Multifunction display
F0I0008m

m c warning lights fitted on diesel versions

F0I0011m

Versions with indications in miles for certain markets

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Left-hand drive versions

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

(C) - Engine coolant temperature gauge
and excessive temperature
warning light

7

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

(C) - Engine coolant temperature gauge
and excessive temperature
warning light

CORRECT USE
OF THE CAR

(D) - Rev counter

(A) - Speedometer (speed indicator)
(B) - Fuel level gauge with reserve
warning light

(E) - Reconfigurable multifunction
display
t warning light fitted on Speedgear or
F0I0009m

Left-hand drive versions

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

8

F0I0012m

Versions with indications in miles for certain markets

Downloaded from www.Manualslib.com manuals search engine

Dualogic versions
m warning light fitted on diesel versions

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

EMOTION versions

DASHBOARD
AND CONTROLS

SPORTING version
(A) - Speedometer (speed indicator)

SAFETY
DEVICES

(B) - Fuel level gauge with reserve
warning light

(D) - Rev counter
(E) - Reconfigurable multifunction
display
t warning light fitted on Speedgear or

Left-hand drive versions

F0I0013m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Dualogic versions
m warning light fitted on diesel version only

F0I0010m

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

(C) - Engine coolant temperature gauge
and excessive temperature
warning light

Versions with indications in miles for certain markets

9

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

(C) - Engine coolant temperature gauge
and excessive temperature
warning light

CORRECT USE
OF THE CAR

(D) - Rev counter

(A) - Speedometer (speed indicator)
(B) - Fuel level gauge with reserve
warning light

(E) - Reconfigurable multifunction
display
F0I0247m

Left-hand drive versions

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

HGT version

F0I0248m

Versions with indications in miles for certain markets

10

Downloaded from www.Manualslib.com manuals search engine

m warning light fitted on diesel versions
t warning light fitted on Speedgear or
Dualogic versions

DASHBOARD
AND CONTROLS

SYMBOLS

SAFETY
DEVICES

Special coloured labels have been attached near or actually on some of
the components of your Fiat Punto. These labels bear symbols that
remind you of the precautions to be taken as regards that particular
component.

CORRECT USE
OF THE CAR

The plate summarising the symbols used can be found under the bonnet.

THE FIAT CODE SYSTEM

WARNING
LIGHTS AND
MESSAGES

To further protect you car from theft, it has been fitted with an engine
immobilising system. This system is automatically activated when the
ignition key is removed.

The code is sent only if the Fiat CODE system control unit has
recognised the code transmitted from the key.
Each time the ignition key is turned to the STOP position, the Fiat CODE
system deactivates the functions of the engine electronic control unit.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Each time the car is started turning the ignition key to MAR, the Fiat
CODE system control unit sends a recognition code to the engine
control unit to deactivate the inhibitor.

F0I0073m

INDEX

OPERATION

IN AN
EMERGENCY

An electronic device, in fact, is fitted in each ignition key grip. The device
transmits a radio-frequency signal when the engine is started through a
special aerial built into the ignition switch. The modulate signal, which
changes each time the engine is started, is the password by means of
which the control unit recognises the key and enables to start the engine.

11

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

In this case, the key should be moved to the STOP
position and then back to MAR; if the lock continues,
possibly try again with the other key provided with the
car. If it is still not possible to start the car, follow the
instructions given in chapter “In an emergency” and
then contact a Fiat Dealership.
IMPORTANT Every key has its own code, which must
be memorised by the system control unit. To
memorise new keys, up to a maximum of eight, apply
to Fiat Dealership.

Warning light Y coming on when driving

❒ If the warning light Y turns on, this means that
the system is running a self-test (for example for a
voltage drop). At the first stop, turn the ignition key
to STOP and then to MAR again: if no failure is
detected warning light Y will not come on.

❒ If the warning light Y stays on, repeat the
procedure described previously leaving the key at
STOP for over 30 seconds. Should the
inconvenience persists, contact a Fiat Dealership.

❒ If the warning light Y stays on this means that the
code has not been recognised. In this case, the key
should be moved to the STOP position and then
back to MAR; if the lock continues, possibly try
again with the other key provided with the car. If it
is still not possible to start the car, follow the
instruction given in chapter “In an emergency” and
then contact a Fiat Dealership.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

At starting, if the code has not been recognised
correctly, the warning light Y will come on.

The electronic components inside the key may be damaged if the key is submitted to sharp knocks.

12

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

THE KEYS
CODE CARD

U.K. VEHICLES ONLY
At the behest of the motor Insurance Companies the CODE card for
emergency starting and remplacement of keys is not provided. If you
need assistance please contact your nearest Fiat Dealership or telephone
Free Phone 0800 717000.

All the keys and the CODE card must be handed over to the new owner when selling the car.

WARNING
LIGHTS AND
MESSAGES

IMPORTANT In order to ensure perfect efficiency of the electronic
devices contained inside the keys, they should never be exposed to direct
sunlight.

IN AN
EMERGENCY

Make sure you have the electronic code (A) with you at all times in the
event you have to perform an emergency start-up.

F0I0036m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

❒ the mechanical key code (B) to be given to the Fiat Dealership when
ordering duplicate keys.

INDEX

❒ the electronic code (A) to be used for emergency starting (see
“Emergency starting” in section “Correct use of the car”)

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The car is delivered with two copies of the key and the CODE card
which bears the following:

13

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

❒ the door and boot locks;

Key (A) (or (C) in alternative), delivered in two copies when the car is
not fitted with remote control, controls the following:
❒ the ignition switch;
❒ the fuel filler cap locking/unlocking (versions with fuel filler cap with
keylock);
F0I0038m

Key (B) (or (D) in alternative), delivered together with key (A) or (C)
when the car is fitted with remote control, controls the following:
❒ the ignition switch;
❒ the door and boot locks;

IN AN
EMERGENCY

❒ the fuel filler cap locking/unlocking (versions with fuel filler cap with
keylock);
F0I0267m

Downloaded from www.Manualslib.com manuals search engine

❒ the switch to deactivate the passenger’s air bag (where provided).
Button (F) operates remote door locking/unlocking.
Led (E-where provided) comes on when sending the control to the
system receiver.
When unlocking the doors, the internal lights will come on for a preset
length of time.
IMPORTANT Certain radio devices outside the car (e.g. mobile phones,
HAM radio systems) could disturb the remote control frequency. In this
case the remote control could malfunction.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

14

❒ the switch to deactivate the passenger’s air bag (where provided).
KEY WITH REMOTE CONTROL (where provided)

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

KEY WITHOUT REMOTE CONTROL

F0I0039m

DASHBOARD
AND CONTROLS

Replacing the battery of the key with remote control
If when pressing the remote control button, the led on the key flashes
briefly only once, the battery should be replaced with an equivalent one
that can be purchased at common stores.

F0I0040m

❒ close the plastic case.
Request for additional remote controls

Used batteries are harmful to the environment. They should be disposed of as specified by law in
the special containers provided, or take them to a Fiat Dealership, which will deal with their
disposal.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The system can recognise up to 8 keys with incorporated remote
control. Should a new key with remote control be necessary, contact a
Fiat Dealership, taking with you the CODE card, a personal identity
document and the car’s ownership documents.

WARNING
LIGHTS AND
MESSAGES

❒ remove the run-down battery (B) and insert the new one respecting
the polarity;

IN AN
EMERGENCY

❒ open the plastic case by inserting a screwdriver in recess (A);

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Battery replacement:

15

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

IGNITION SWITCH
The key can be turned to 4 different positions:

SAFETY
DEVICES

❒ STOP: engine off, key can be removed, steering column locked.
Certain electrical devices (e.g.: sound system, power windows, etc.)
can work.

CORRECT USE
OF THE CAR

❒ MAR: driving position. All electrical devices are powered.
F0I0035m

❒ AVV: engine starting.
❒ PARK: engine off, parking lights on, steering column locked. To turn
the key to PARK, press button (A).

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

The ignition switch is fitted with a safety mechanism that, in the event the
engine is not started, turns back the ignition key to STOP before epeating
the starting operation.

WARNING

WARNING

If the ignition device is tampered with (e.g.: attempted theft), have it checked over
by a Fiat Dealership.

When getting out of the car, always remove the key to prevent any occupants
from accidentally activating the controls. Remember to engage the
handbrake. If the car is parked on uphill slope to engage the first gear. If the
car is facing downhill, engage the reverse gear. Never leave unsupervised
children in the car.

16

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

STEERING COLUMN LOCK
Engaging

Disengaging
Rock the steering wheel slightly as you turn the ignition key to MAR.

WARNING

Never remove the ignition key while the car is moving. The steering wheel would
automatically lock as soon as you try to turn it. This also applies when the car is
being towed.

It is absolutely forbidden to carry out whatever after-market operation involving
steering system or steering column modifications (e.g.: installation of anti-theft
device) that could badly affect performance and safety, cause the lapse of
warranty and also result in non-compliance of the car with homologation
requirements.

INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0035m

CORRECT USE
OF THE CAR

SAFETY
DEVICES

When the key is to STOP or PARK remove the key and turn the steering
wheel until it locks.

17

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

INSTRUMENTS
Instrument background and type can change according to versions.

F0I0229m

18

Downloaded from www.Manualslib.com manuals search engine

REV. COUNTER
The rev. counter shows engine rpm. The needle pointed to the danger
area (red on certain versions) indicates excessive high engine speed. Do
not drive for long periods with the needle in this area.
IMPORTANT The electronic injection control system gradually shuts off
the flow of fuel when the engine is “over-revving” resulting in a gradual
loss of engine power.
When the engine is idling, the rev counter may indicate a gradual or
sudden highering of the speed.
This is normal as it takes place during normal operation, for example
when activating the climate control system or the fan. In particular a slow
change in the speed preserves the battery charge.
FUEL LEVEL GAUGE

F0I0042m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

SPEEDOMETER (SPEED INDICATOR)
It indicates the car speed.

The needle indicates the amount of fuel left in the tank.The reserve
warning light (A) turns on (on certain versions together with the message
shown on the reconfigurable multifunction display) to indicate that 5 to 7
litres of fuel are left in the tank.
E - tank empty.
F - tank full (see contents of “At the filling station” paragraph in this
chapter).
Do not travel with the fuel tank almost empty: the gaps in fuel delivery
could damage the catalyst.
IMPORTANT If the needle reaches the (E) with warning light (A) flashing
this means that there is a failure. Contact a Fiat Dealership.

F0I0041m

DASHBOARD
AND CONTROLS

ENGINE COOLANT TEMPERATURE GAUGE
This shows the temperature of the engine coolant fluid and begins
working when the fluid temperature exceeds approx. 50°C.

H - excessive engine coolant temperature.
F0I0041m

If the needle reaches the red area, stop the engine immediately and contact a Fiat Dealership.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

The turning on of the warning light (B) (on certain versions together with
the message shown on the reconfigurable multifunction display) indicates
that the coolant fluid temperature is too high; in this case, stop the
engine and contact a Fiat Dealership.

WARNING
LIGHTS AND
MESSAGES

C - low engine coolant temperature.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Under normal conditions, the needle should hover around the middle of
the scale according to the working conditions.

19

Downloaded from www.Manualslib.com manuals search engine

7

¯

DASHBOARD
AND CONTROLS

To use the information the “Digital display”, “Multifunction display” and
“Reconfigurable multifunction display” are able to give (with the ignition
key at MAR), you should firstly familiarise with the control buttons on
the right and left side of the instrument panel and on the top of the right
stalk (for the “Trip computer” function) (where provided) using them as
described below.

¯

SAFETY
DEVICES

CONTROL BUTTONS

0

ŸΔ

F0I0063m

The left-hand side of the instrument panel features two buttons (A and B)
for adjusting the headlight beam according to the transported load.
Buttons can be operated with ignition key at MAR and dipped beam
headlights on. See paragraph "Headlights" in this section for further
details.

IN AN
EMERGENCY

F0I0245m

Downloaded from www.Manualslib.com manuals search engine

Trip button
To show on the display: total and trip km/miles.
Press briefly: to switch between total and trip km/miles.
Press for over 2 seconds: to reset trip km/miles.
h button
Set clock.
Multifunction display (where provided)
+/– button

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Digital display (where provided)

Button +: set clock (to increase minutes)
F0I0244m

20

Before doing anything you are also advised to read this chapter
thoroughly.
Headlight beam adjusting device

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

1

Button – : set clock ( to decrease minutes)

DASHBOARD
AND CONTROLS

Reconfigurable multifunction display (where provided)
+/– buttons

WARNING
LIGHTS AND
MESSAGES

Press for less than 2 seconds (pulse) indicated with Q in the following
diagrams, to confirm the option required and/or move to the main menu
(same option), or access the menu.

IN AN
EMERGENCY

Press for over 2 seconds, indicated with R in the following diagrams, to
exit the set-up menu without confirming the selections being set.
TRIP button (for multifunction display and reconfigurable
multifunction display)
Press for less than 1 second (pulse) indicated with % in the following
diagrams, to scroll the Trip computer display.

F0I0043m

INDEX

Press for more than 2 seconds indicated with & in the following
diagrams, to reset the Trip computer and start a new mission.

CORRECT USE
OF THE CAR

F0I0242m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

MODE button

SAFETY
DEVICES

To scroll the menu and the related options upwards/downwards or to
increase/decrease the value displayed, to adjust, with sidelights turned on,
the dimmer and the instrument panel and automatic two-zone climate
control system (where provided) display/index (if pressed with “Set-up
menu” off).

21

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

DIGITAL DISPLAY (where provided)

SAFETY
DEVICES

❒ Clock (B) (always displayed, also with key removed and front doors
closed).

DISPLAY INFO
❒ Headlight aiming position display (only with dipped beams on) (A)

2
F0I0210m

INDEX

22

Downloaded from www.Manualslib.com manuals search engine

With ignition key removed, when opening one of the front doors the
display comes on showing the clock and the odometer indication.
If the “Follow me home” function is on (see paragraph “Follow me
home” in this section), the display will show the time the function is on
instead of the mileage recorder indication (see figure).

D

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

❒ Total (C) and partial (D) odometer.
F0I0209m

F0I0222m

DASHBOARD
AND CONTROLS

Warning light check function
The instrument panel performs a check on the following warning lights:
❒ handbrake on/low brake fluid level;

SAFETY
DEVICES

❒ ABS and EBD system;
❒ ESP system on/failure;

F0I0223m

WARNING
LIGHTS AND
MESSAGES

When the initial check is over, the message LEd Error will flash on the
display for about 10 seconds to warn the driver that a failure has been
detected (on one or more warning lights).
SET CLOCK

IN AN
EMERGENCY

Press button h. Each pulse on the button will obtain increase by one unit.
Automatic fast increase is obtained by keeping the button pressed for few
seconds. When you are near the required value, release the button and
complete adjustment with single presses.

INDEX

F0I0245m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Warning light check is performed automatically when turning the ignition
key to MAR and during normal operation if a failure is detected.

CORRECT USE
OF THE CAR

❒ “Dualdrive” (where provided) electric power steering failure.

23

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

INFORMATION ON STANDARD SCREEN

The “Multifunction display” shows all the useful information necessary
when driving, more particularly:
❒ Total odometer (A).
❒ Clock (B).
F0I0031m

If the “Follow me home” function is on (see paragraph “Follow me home”
in this section), the display will show the time the function is on instead of
the mileage recorder indication (see figure).

IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

24

Downloaded from www.Manualslib.com manuals search engine

With ignition key removed and front doors closed the display is off.
With ignition key removed, when opening one of the front doors the
display comes on showing the clock and the odometer indication.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

MULTIFUNCTION DISPLAY (where provided)

INFORMATION ABOUT CAR CONDITIONS (at event)
❒ Trip computer information.
F0I0030m

❒ Headlight aiming position display (with dipped beam headlights on) (C).

DASHBOARD
AND CONTROLS

TRIP COMPUTER
Pressing button {, the “Trip computer” function gives is displayed,
information relating to the operating status of the car. This function is
resettable.

SAFETY
DEVICES

F0I0164m

(*) When the Instant consumption value is displayed, the word TRIP will
not be displayed.
F0I0165m

WARNING
LIGHTS AND
MESSAGES

To start a new journey, with the key to MAR, press button { with
mode & (see paragraph “Control buttons”).
IMPORTANT “Range to empty” information cannot be reset.
F0I0166m

Average speed

F0I0167m

Trip time

F0I0168m

INDEX

Average/instant
consumption (*)

IN AN
EMERGENCY

Start of journey procedure (reset)

Distance travelled

CORRECT USE
OF THE CAR

Range to empty

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Values displayed are: Range to empty, Distance travelled, Average
consumption, Instant consumption, Average speed, Trip time (driving
time). Value selected will be displayed until a new information is
requested.

Downloaded from www.Manualslib.com manuals search engine

25

DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

Trip time = time elapsed from the start of the new
mission (*).

❒ range lower than 50 km;

– “manual” reset is performed by the driver by
pressing the relevant button (see paragraph
“Control buttons”)

❒ car parked with engine running for long time; when
restarting range indication will be displayed again
Distance travelled = shows the km (or miles)
covered from the start of the new mission (*).
Average consumption = shows the average
consumption calculated from the start of the new
mission (*); this value can be expressed in km/l or
l/100 km or in mpg.
Instant consumption = shows fuel consumption
variation, this value is updated constantly. If the car is
parked with engine running the display will show
“- - - -”. When restarting the car, the instant
consumption indication will be displayed again.
Average speed = shows the average speed of the
car in relation with total time elapsed from the start of
the new mission (*).

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Range to empty = = shows the distance in km (or
miles) that the car can still cover before needing fuel,
assuming that driving conditions are kept unvaried.
The display will show “- - - -” in the following cases:

26

Downloaded from www.Manualslib.com manuals search engine

(*) New mission = starts from last reset:

– “automatic” reset is performed when the Distance
travelled reaches 3999.9 km or when Trip Time
reaches 99:59 (99 hours and 59 minutes)
– after reconnecting the battery.
IMPORTANT Lacking information, Trip computer
values are displayed with “- - - -”. When restoring
normal operating conditions after a failure, calculation
will restart regularly without resetting either previous
displayed values or the start of a new mission (*).
IMPORTANT After disconnecting/reconnecting the
battery, certain displayed values will be equal to
“- - - -” until significant data for recalculation are
available.

DASHBOARD
AND CONTROLS

WARNING LIGHT CHECK FUNCTION
The instrument panel performs a check on the following warning lights:
❒ handbrake on/low brake fluid level;

SAFETY
DEVICES

❒ ABS and EBD system;
❒ ESP system on/failure;

WARNING
LIGHTS AND
MESSAGES

F0I0032m

SET CLOCK

IN AN
EMERGENCY

To adjust the time, press button (+) to increase minutes, button (–) to
decrease minutes. Every press on the button increases or decreases by
one unit. Keeping the corresponding button pressed obtains automatic
fast increase or decrease. When you are near the required value, release
the button and complete adjustment with single presses.

INDEX

F0I0244m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Warning light check is performed automatically when turning the ignition
key to MAR and during normal operation if a failure is detected. When
the initial check is over, the message LEd Err will flash on the display for
about 10 seconds to warn the driver that a failure has been detected (on
one or more warning lights.

CORRECT USE
OF THE CAR

❒ “Dualdrive” (where required) electric power steering failure.

27

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

RECONFIGURABLE MULTIFUNCTION
DISPLAY (where provided)

INFORMATION ON STANDARD SCREEN
❒ Date (A).
F0I1000g

❒ External temperature (D).
❒ Speedgear or Dualogic info display (where provided) (F).
With ignition key removed and front doors closed the display is off.
With ignition key removed, when opening one of the front doors the
display comes on showing the clock and the odometer indication.

IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

28

Downloaded from www.Manualslib.com manuals search engine

❒ Total odometer (B).
❒ Clock (C).

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The “Multifunction display” shows all the useful information necessary
when driving, more particularly:

F0I1001g

If the “Follow me home” function is on (see paragraph “Follow me
home” in this section), the display will show the time the function is on
(see section “Warning lights and messages”).
INFORMATION ABOUT CAR CONDITIONS (at event)
❒ Scheduled maintenance programme intervals.
❒ Trip computer information.
❒ Light adjustment of graphics/index/instrument cluster display and twozone climate control system (where provided).
❒ Display of failure/warning/function activation messages.

❒ CONSUMPTION UNIT

SET-UP MENU

❒ TEMPERATURE UNIT

The number of items in the menu depends on the car
settings.

❒ BUZZER VOLUME

❒ LANGUAGE

When travelling, only the “Speed limit” indication is
enabled.

❒ BUTTON VOLUME

The “Set-up Menu” enables to perform the following
adjustments and/or settings using the control buttons
(see previous pages):

❒ EXIT MENU

❒ SPEED LIMIT
❒ TRIP B ON/OFF
❒ SET CLOCK

(●) “Audio Rpt.” menu item is present only if the car
is fitted, as standard, with sound system.

DASHBOARD
AND CONTROLS
INDEX

❒ CLOCK MODE

❒ SERVICE

SAFETY
DEVICES

❒ DISTANCE UNIT

CORRECT USE
OF THE CAR

❒ SPEEDLOCK (where provided)

WARNING
LIGHTS AND
MESSAGES

There is also a menu enabling to perform the following
adjustments and/or settings using the control buttons
(see previous pages):

❒ AUDIO REPETITION (where provided) (●)

IN AN
EMERGENCY

❒ Repetition of audio info.

❒ SET DATE

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

❒ Headlight aiming position display (with dipped beam
headlights on) (E).

29

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

Turning the ignition key to MAR, the multifunction display shows the message “Check active”: the diagnostic phase
of all the electronic systems on the car has started. This lasts few seconds: if no faults are detected, when the engine
has started, the display shows the “Check OK” message. See section “Warning lights and messages” if faults are
found.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

INITIAL CHECK

WARNING
LIGHTS AND
MESSAGES

If the display shows a failure message,
see details in section “Warning lights
and messages”.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Is the engine
started?

YES
If no failures are
present

NO
or

Standard
screen display
The “Service schedule” includes vehicle maintenance every 20,000 km (or 12,000 mi) or every year; this is shown automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 miles) or 30 days from this deadline and it is shown again every 200 km (or 124 mi) or 3
days. For 1.3 Multijet versions, see “Care and Maintenance” in section “Service schedule to change engine oil and filter and air cleaner. Below
200 km service indications are proposed at shorter intervals. Below 200 km service indications are proposed at shorter intervals. Service intervals will be displayed in km or mi according to the unit set. When a programmed maintenance interval (coupon) is near to come, turning
the ignition key to MAR, will display the message “Service” followed by the number of km, or days to go before car servicing. “Scheduled servicing” message is displayed in km, miles or days according to the approaching service interval. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” or “Annual inspection plan”, and to reset the display.

30

Downloaded from www.Manualslib.com manuals search engine

Example:

Español
Nederlan

Year

Français
Português

TRIP B
SPEED LIM.

CLOCK ADJUST.
CLOCK MODE

Example:

Q

AUDIO RPT.

KEYS VOLUME

DOOR LOCK

BUZZER VOL

DIST. UNIT

LANG. ENGLISH
TEMP. UNIT

CONSUMP.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

DATE ADJUSTM.

SERVICE

IN AN
EMERGENCY

EXIT MENU

INDEX

Q

Month

CORRECT USE
OF THE CAR

Day

English

WARNING
LIGHTS AND
MESSAGES

Deutsch
Italiano

SAFETY
DEVICES

The menu comprises a series of functions arranged in a “circular fashion” which can be selected through buttons +
and - for access to the different select operations and settings (see examples “Lang.” and “Date adjustm.” below); for
further details, also refer to “Access to menu screen” on next page.

DASHBOARD
AND CONTROLS

MENU DESCRIPTION

31

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

After the “Initial check”, it is possible to access the menu screen pressing the button Q.
To surf the menu press buttons + or –.
IMPORTANT If after entering the menu no setting/adjustment is performed within 60 seconds, the system exits the
menu automatically and returns to previously displayed screen. In this case the last selected but not confirmed
setting (through button Q) is not stored and therefore the operation shall be repeated (this stands valid also when
quitting the Menu by pressing the R button).
When the car is running, it is possible to access only the reduced menu (for setting “Speed limit”).
When the car is stationary access to the whole menu is enabled.
The following diagram shows the cases described.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

ACCESS TO MENU SCREEN

32

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

See
“Initial check”

Speed Lim.
Exit Menu
Reduced menu screen

INDEX

Extended menu screen

CORRECT USE
OF THE CAR

YES

Speed Lim.
Trip B
Clock Adjust.
Clock Mode
Date Adjustm.
Audio Rpt.
Door Lock
Dist. Unit
Consump
Temp. Unit
Lang.
Buzzer Vol
Keys Volume
Service
Exit menu

WARNING
LIGHTS AND
MESSAGES

Example of standard
screen

IN AN
EMERGENCY

Is the car
moving?

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Q

SAFETY
DEVICES

NO

33

Downloaded from www.Manualslib.com manuals search engine

With this function it is possible to set the car speed limit which, if exceeded, automatically sounds a buzzer and
makes the warning light è with the special message on the display (see “Warning lights and messages” section) come
on to alert the driver. To set the speed limit, proceed as follows:
See “Initial check”
and “Access to
menu screen”

R
Q

+


Return to previously
displayed
screen, e.g.:

R

Menu screen

+ Use buttons +/– to select ON/OFF.
– Set selection flashes.

Return to menu
screen

Return to menu
screen

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND CONTROLS

SPEED LIMIT (Speed Lim.)

34

Downloaded from www.Manualslib.com manuals search engine

Q

Q
Q

R

Use buttons +/- to set the speed required (during the setting operation the value flashes on the screen). The possible setting is
between 30 and 250 km/h or between 20 and 155 mph dependingon the unit set previously (see “Distance Unit” paragraph
described later). Every press (pulse) of the button +/–
increases or decreases by five units. Keeping button +/– pressed
obtains the automatic fast increase or decrease. When you are
near the required setting, complete adjustment with single presses.

R
Q
Q

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Menu screen

R
Return to menu screen

Return to menu screen

Q
R

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q

INDEX

Q

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

+ Use buttons +/– to select ON/OFF.
Set selection flashes.


IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

R
Q

+


CORRECT USE
OF THE CAR

SAFETY
DEVICES

Through this option it is possible to activate (ON) or deactivate (OFF) the Trip B (partial trip) which show “partial
mission” information corresponding to: Trip Dist. B, Avg. Consump. B, Avg. Speed B, Time B. For further
information see “General trip - Trip B”.

DASHBOARD
AND CONTROLS

TRIP B ON/OFF (Trip B)

35

During setting, the clock is displayed in 24h mode regardless of the set clock mode (12h/24h).
To set the clock (hours - minutes) proceed as follows:

SAFETY
DEVICES

DASHBOARD
AND CONTROLS

SET CLOCK (Clock Adjust.)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Return to previously
displayed
screen, e.g.:

R
Q

+

Menu screen

+


Q
Q

R

R
+


Q
Q

R

Return to menu
screen
Every press (pulse) on button +/– increases or decreases
by one unit. Keeping button +/– pressed obtains automatic
fast increase or decrease. When you are near the required
setting, complete adjustment with single presses.

36

Downloaded from www.Manualslib.com manuals search engine

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Menu screen

R
Return to menu screen

Return to menu screen

Q
R

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q

DASHBOARD
AND CONTROLS
INDEX

Q

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

+ Use buttons +/– to select 12 h or
24 h mode.
– Set selection flashes.

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

R
Q

+


SAFETY
DEVICES

This function is used to set the clock in the 12h (12 hour) or 24h (24 hour) mode. To adjust proceed as follows:

CORRECT USE
OF THE CAR

CLOCK MODE (Clock Mode)

37

To correct the date (year - month - day ) proceed as follows:

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND CONTROLS

SET DATE (Date Adjustm.)

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Return to previously
displayed
screen, e.g.:

R
Q

+

Menu screen

+


R
Q

R
Q
Q

+


Every press (pulse) on button +/– increases or decreases
by one unit. Keeping button +/– pressed obtains
automatic fast increase or decrease. When you are near
the required setting, complete adjustment with single
presses.

38

Downloaded from www.Manualslib.com manuals search engine

R

+


Q
Q

R

Return to menu screen

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed screen, e.g.:

Return to menu
screen

Return to menu screen

+ Use buttons +/– to select ON/OFF.
– Set selection flashes

Q
Example of audio
repetition

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q
R

Q

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

R

INDEX

Menu screen

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

R
Q

+


CORRECT USE
OF THE CAR

SAFETY
DEVICES

With this function the display repeats information relevant to the Radio (selected radio station frequency or RDS
message, automatic tuning or AutoSTore), audio CD (track number), MP3 CD (track number), CD Changer (CD
number and track), and Tape (operating mode).

DASHBOARD
AND CONTROLS

AUDIO REPETITION (Audio Rpt.) (where provided)

39

DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

This function:
❒ when activated (ON) locks automatically the doors when the car speed exceeds 20 km/h;
❒ when deactivated (OFF) doesn’t perform automatic door lock when the car speed exceeds 20 km/h
See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

R
Q

+

Menu screen

R
Return to menu screen

Return to menu screen

+ Use buttons +/– to select ON/OFF.
– Set selection flashes.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

SPEEDLOCK (Door Lock) (where provided)

Q

40

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q
R

Q

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Menu screen

R
Return to menu screen

Return to menu screen

Q
R

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q

DASHBOARD
AND CONTROLS
INDEX

Q

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

+ Use buttons +/– to set the required
distance units (km or mi).
– Set selection flashes.

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

R
Q

+


SAFETY
DEVICES

The display gives information according to the set unit (km or mi). To select the required distance units, proceed
as follows:

CORRECT USE
OF THE CAR

“DISTANCE UNIT” (Dist. Unit)

41

DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

This function enables to select the unit of measure for fuel consumption (km/l, l/100 km or mpg) according to the
previously set distance unit (km or mi, see previous paragraph “Distance unit”). To set this function proceed as
follows:
Menu screen
See “Initial check”
and “Access to
menu screen”

Return to
previously displayed
screen, e.g.:

R

Return to menu
screen

Return to menu
screen

+ Use buttons +/– to set the
fuel consumption unit km/l or l/100km.
– Set selection flashes

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE
INDEX

R
Q

+


If setting km

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

“CONSUMPTION UNIT” (Consump.)

Q

Q

Q
R

R
If setting mi

42

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q

DASHBOARD
AND CONTROLS

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Return to menu screen

Return to menu screen

+


Use buttons +/– to select
the required temperature unit (°C or °F).
Set selection flashes.

Q

Q
R

Q
R

Q

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

R

INDEX

Menu screen

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

R
Q

+


SAFETY
DEVICES

To select temperature unit (°C or °F), proceed as follows:

CORRECT USE
OF THE CAR

“TEMPERATURE UNIT” (Temp. Unit)

43

Downloaded from www.Manualslib.com manuals search engine

Display messages can be shown in different languages (Italian, Dutch, English, Spanish, French, Portuguese, German).
To select the required language proceed as follows:

See “Initial check”
and “Access to
menu screen”

Menu screen

R


IN AN
EMERGENCY





Q



INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Return to previously
displayed
screen, e.g.:

R
Q

+


WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND CONTROLS

LANGUAGE (Lang.)

44

Downloaded from www.Manualslib.com manuals search engine





Q

Return to menu
screen

See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

Return to menu screen

Return to menu screen

+ Use buttons +/– to adjust
the buzzer volume.
– Set selection flashes.

Q

Q
R

Q
R

Q

DASHBOARD
AND CONTROLS
TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

R

INDEX

Menu screen

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

R
Q

+


SAFETY
DEVICES

The volume of the buzzer accompanying any failure/warning indication can be adjusted according to 8 levels. The
buzzer can be adjusted and, in certain cases, it cannot be excluded. To adjust the volume proceed as follows:

CORRECT USE
OF THE CAR

BUZZER VOLUME (Buzzer Vol)

45

Downloaded from www.Manualslib.com manuals search engine

The volume of the roger-beep accompanying the activation of certain buttons can be adjusted according to 8 levels.
The roger-beep can be adjusted and excluded. To adjust the volume proceed as follows:
See “Initial check”
and “Access to
menu screen”

Return to previously
displayed
screen, e.g.:

R
Q

+

Menu screen

R
Return to menu screen

Return to menu screen

+ Use buttons +/– to adjust
the roger-beep volume.
– Set selection flashes.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND CONTROLS

BUTTON VOLUME (Keys Volume)

Q

46

Downloaded from www.Manualslib.com manuals search engine

Q
R

Q
R

Q

See “Initial check”
and “Access to
menu screen”

WARNING
LIGHTS AND
MESSAGES

or

Menu screen

R

Return to previously
displayed
screen, e.g.:

R
Use buttons + or – to select displaying
in km/days or mi/days according to the
“unit” set.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

+


IN AN
EMERGENCY

Return to menu
screen

Return to menu
screen

Q

R

R

Q
continues
on next
page

INDEX

R
Q

+


CORRECT USE
OF THE CAR

Return to previously
displayed
screen, e.g.:

DASHBOARD
AND CONTROLS

Through the “Service” function it is possible to receive information connected with correct vehicle maintenance.

SAFETY
DEVICES

SERVICE (Service)

47

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

Q
continues
from
previous
page

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Return to menu
screen

WARNING
LIGHTS AND
MESSAGES
INDEX

Return to previously
displayed
screen, e.g.:

R
Q

IN AN
EMERGENCY
TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

R

Return to menu
screen

The “Service schedule” includes vehicle maintenance every 20,000 km (or 12,000 mi) or every year; this is shown automatically, with the ignition key at MAR, starting from 2,000 km (or 1,240 miles) or 30 days from this deadline and it is shown again every 200 km (or 124 mi) or 3
days. For 1.3 Multijet versions, see “Car Maintenance” in section “Service schedule to change engine oil and filter and air cleaner. Below 200
km service indications are proposed at shorter intervals. Service intervals will be displayed in km or mi according to the unit set. When a programmed maintenance interval (coupon) is near to come, turning the ignition key to MAR, will display the message “Service” followed by the
number of km, or days to go before car servicing. “Scheduled servicing” message is displayed in km, miles or days according to the approaching service interval. Contact a Fiat Dealership to carry out any service operation provided by the “Service schedule” or “Annual inspection
plan”, and to reset the display.

48

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

EXIT MENU (Exit Menu)

See “Initial check”
and “Access to
menu screen”

+


R

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Use button – to return to Speed Lim.
screen (first Menu item).

WARNING
LIGHTS AND
MESSAGES

Menu screen

IN AN
EMERGENCY

Return to previously
displayed
screen, e.g.:

CORRECT USE
OF THE CAR

SAFETY
DEVICES

This is the last function that closes the circular setting cycle listed in the initial menu screen.

49

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS
SAFETY
DEVICES

The “General trip” displays the figures relating to Range, Distance, Aver. Consumpt., Curr. consumpt., Avg. speed,
Traveltime. “Trip B” displays information concerning Distance B, Aver. Consump. B, Avg. speed B, Traveltime B
(driving time). The “Trip B” function can be excluded. Value selected will be displayed until new information is
requested.

{ on right steering

Reset GENERAL TRIP
End of complete mission - Start of new mission

Reset General Trip
End of complete mission - Start of new mission

˙

INDEX

To start a new journey monitored by the “General trip”, with the key to MAR, press button
column stalk with mode & (see “Control buttons”).

GENERAL TRIP
Reset TRIP B

TRIP B
End of partial mission
Start of new partial mission

˙

End of partial mission
Start of new partial mission

˙

Reset TRIP B
End of partial mission
Start of new partial mission

Reset TRIP B

TRIP B

˙

˙

TRIP B

˙

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Start of journey procedure (reset)

˙

50

The “Trip computer” displays information relating to the operating status of the car. This function comprises the
“General trip”, concerning the complete mission of the car and “Trip B”, concerning the partial car mission. This
function (as shown in the graph below) is contained within the complete mission. Both functions are resettable.

˙

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

TRIP COMPUTER

Reset TRIP B
End of partial mission
Start of new partial mission

The reset operation in the presence of the screens concerning the “General trip” makes it possible to reset also the
“Trip B”. The reset operation in the presence of the screens concerning only the “Trip B” makes it possible to reset
only the information associated with this function.
IMPORTANT The “Range” information cannot be reset.

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

“Trip computer” information are displayed according to the following diagram:

%

%

Previously displayed
screen, e.g.:

%

%
(*)

(*)

(*)

continued from previous page

(*)

(*)
“Reset General trip” and “Trip B” excluding
& = “Range
to empty” (see paragraph “Reset General trip”).

The two screens concerning a trip item
alternate three times, then the second
one stays on fixed on the display.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

(*)

%

%

INDEX

%

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

(*)

CORRECT USE
OF THE CAR

SAFETY
DEVICES

See “Initial check” and
“Access to menu screen”

51

Downloaded from www.Manualslib.com manuals search engine

continued from previous page

Trip B ON?

NO

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND CONTROLS

Return to previously
displayed screen, e.g.:

%
(*)

%
(*)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

YES

52

Downloaded from www.Manualslib.com manuals search engine

“Reset Trip B”
& = (see
paragraph “Reset Trip B”).

%

%
(*)

(*)

DASHBOARD
AND CONTROLS

“Reset General trip” and “Trip B”
& = (excluding
“Range to empty”).

& = “Reset Trip B”

INDEX

Reset TRIP B

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Reset GENERAL TRIP

SAFETY
DEVICES

After resetting “Trip” by pressing the button with & mode, the following functions are displayed:

53

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND CONTROLS

Trip time = time elapsed from the start of the new
mission (*).

SAFETY
DEVICES

❒ range lower than 50 km. In this event “- - - -” are
preceded by message “Warning Limited Range” (this
message will be displayed even if not in Trip
Computer mode);

– “manual” reset is performed by the driver by
pressing the relevant button (see paragraph
“Control buttons”)

❒ car parked with engine running for long time; when
restarting range indication will be displayed again.
Distance travelled = shows the km (or miles)
covered from the start of the new mission (*).
Average consumption = shows the average
consumption calculated from the start of the new
mission (*); this value can be expressed in km/l or
l/100 km or in mpg.
Instant consumption = shows fuel consumption
variation, this value is updated constantly. If the car is
parked with engine running the display will show “- - -“. When restarting the car, the instant consumption
indication will be displayed again.
Average speed = shows the average speed of the
car in relation with total time elapsed from the start of
the new mission (*).

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Range to empty = shows the distance in km (or
miles) that the car can still cover before needing fuel,
assuming that driving conditions are kept unvaried.
The display will show “- - - -” in the following cases:

54

Downloaded from www.Manualslib.com manuals search engine

(*) New mission = starts from last reset:

– “automatic” reset is performed when the Distance
travelled reaches 9999.9 km or when Trip Time
reaches 99:59 (99 hours and 59 minutes)
– after reconnecting the battery.
IMPORTANT Lacking information, Trip computer
values are displayed with “- - - -”. When restoring
normal operating conditions after a failure, calculation
will restart regularly without resetting either previous
displayed values or the start of a new mission (*).
IMPORTANT After disconnecting/reconnecting the
battery, certain displayed values will be equal to
“- - - -” until significant data for recalculation are
available.

With this function it is possible to adjust the lighting (dimming/brightening) of the instrument cluster, and two-zone
climate control display (where required).

+


+


IN AN
EMERGENCY

See “Initial check”
and “Access to
menu screen”

WARNING
LIGHTS AND
MESSAGES

Use buttons +/– to carry out required
light adjustment.

Previously
displayed
screen, e.g.:

CORRECT USE
OF THE CAR

SAFETY
DEVICES

To adjust proceed as follows:

DASHBOARD
AND
CONTROLS

INSTRUMENT PANEL, DISPLAY AND BUTTON LIGHTING ADJUSTMENT
(LIGHT RHEOSTAT)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Automatic return to standard screen
after few seconds or by
pressing button Q

F0I0243m

55

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

SEATS
FRONT SEATS

Lift the lever (A) (on seat internal side) and push the seat forwards or
backwards: in the driving position the arms should rest on the rim of the
steering wheel.
F0I0044m

Seat height adjustment (where provided)
Move the lever (B) upwards or downwards to achieve the required
height.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Moving the seat backwards or forwards

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

IMPORTANT Adjustment must be carried out only seated in the driver’s
seat.

56

Downloaded from www.Manualslib.com manuals search engine

Back rest angle adjustment
Turn the knob (C).
F0I0045m

Lumbar adjustment (where provided)
To adjust, turn the knob (D).

DASHBOARD
AND
CONTROLS

Seat warming (where provided)
Press button (A) to switch the seat warming on/off.

WARNING

Only make adjustments when the car is stationary.

Once you have released the lever, check that the seat is firmly locked in the
runners by trying to move it back and forth. Failure to lock the seat in place
could result in the seat moving suddenly and the driver losing control
of the car.

INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0049m

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The led on the button will light up when the function is on.

57

Downloaded from www.Manualslib.com manuals search engine

To gain access to the rear seats, pull the handle (A) upwards, the back
rest folds and the seat is free to run forwards.
When resetting the back rest, the seat returns to its original position
(mechanical memory).

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

Tilting the back rest (3-door versions)

A

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Always check that the seat is firmly locked in the runners by trying to
move it back and forth.

58

Downloaded from www.Manualslib.com manuals search engine

F0I0075m

DASHBOARD
AND
CONTROLS

HEAD RESTRAINTS
FRONT SEATS
To raise or lower the head restraint, press button (A) then move it to
the required position until hearing the locking click. Make sure it is
properly locked in place.
F0I0074m

According to versions, two or three head restraints can be provided.

WARNING
LIGHTS AND
MESSAGES

To remove the head restraints, first remove the rear parcel shelf (see
paragraph “Extending the boot”), press button (A) set aside the two
supports and take them out.

A
F0I0136m

WARNING

Remember that the head restraints should be adjusted to support the back of
your head and not your neck. Only in this position do they exert their
protective action.

WARNING

To optimise head restraint protective action, adjust the seat back upright and
keep your head as close as possible to the head restraint.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Certain versions are fitted with three head restraints and central seat
with seat belt with three anchoring points and reel.

INDEX

REAR SEATS (where provided)

CORRECT USE
OF THE CAR

SAFETY
DEVICES

According to versions they can be fixed or adjustable in height.

59

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

STEERING WHEEL
A

On certain versions the steering wheel can be adjusted in height.
Proceed as follows:

SAFETY
DEVICES

❒ move lever (A) to position (1);
❒ adjust the steering wheel;

CORRECT USE
OF THE CAR

❒ refit the lever to position (2) to stop the steering wheel.
F0I0046m

WARNING
LIGHTS AND
MESSAGES

REARVIEW MIRRORS
DRIVING MIRROR

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

The mirror is fitted with a safety device that causes it to be released in
the event of a violent crash.
Using the lever (A) it can be moved to two different positions: normal or
antiglare.
F0I0047m

WARNING

WARNING

Any adjustment of the steering wheel position must be carried out only with the
car stationary and the engine turned off.
It is absolutely forbidden to carry out whatever after-market operation involving
steering system or steering column modifications (e.g.: installation of anti-theft
device) that could badly affect performance and safety, cause the lapse of
warranty and also result in non-compliance of the car with homologation
requirements.

60

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

DOOR MIRRORS
Manual adjustment

Electrical adjustment (where provided)
F0I0048m

This operation can be only performed with ignition key to MAR.
Proceed as follows:

WARNING
LIGHTS AND
MESSAGES

❒ use switch (B) to select the mirror required (left or right);
❒ to adjust the mirror move (A) in the four directions;

As the driver’s door mirror is curved, it may slightly alter the perception of distance.

INDEX

F0I0212m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

IMPORTANT Any adjustment of the mirror position must be carried out
only with the car stationary and handbrake engaged.

When driving the mirrors shall always be in position (1).

CORRECT USE
OF THE CAR

SAFETY
DEVICES

From the passenger compartment, use knob (A) to make the required
adjustments. When required (for example when the mirror causes
difficulty in narrow spaces) it is possible to fold the mirror moving it from
position (1) to position (2).

61

Downloaded from www.Manualslib.com manuals search engine

Version with central dashboard unit

Version with central tunnel unit

F0I0217m

A - Fixed side vents - B - Adjustable side outlets - C Fixed upper vent - D - Fixed central vent - E - Lower
vents

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

HEATING/CLIMATE CONTROL SYSTEM

62

Downloaded from www.Manualslib.com manuals search engine

F0I0189m

A - Fixed side vents - B - Adjustable side outlets - C Fixed upper vent - D - Fixed central vent - E - Lower
vents - F - Lower vents for rear seats

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
F0I0196m

F0I0250m

SIDE OUTLETS AND VENTS
(A) - Adjustable outlet: press in the direction of the arrow as required.

INDEX

(B) - Fixed vent for side windows.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Versions without automatic two-zone climate control system
(A) - Air flow opening/closing control.

CORRECT USE
OF THE CAR

CENTRAL VENTS
Versions with automatic two-zone climate control system
(A) - Fixed vent.
(B) - Swivel vents.
(C) - Control for adjusting air flow:
O vent open
ç vent closed
(D) -Control for directing air flow:

F0I0050m

Downloaded from www.Manualslib.com manuals search engine

63

(C) - (D) Fixed vents for conveying air to the footwell.
C

F0I0051m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

LOWER VENTS

64

Downloaded from www.Manualslib.com manuals search engine

F0I0232m

DASHBOARD
AND
CONTROLS

HEATING AND VENTILATION
CONTROLS

SAFETY
DEVICES

(A): Air temperature knob (mixing hot and
cold air)
(B): Air recirculation on/off button

CORRECT USE
OF THE CAR

(C): Fan knob
(D): Air distribution knob.

outlets;
μ to warm the feet and keep the face cool
(“bilevel” function)
w to speed up passenger compartment
warming;
≤ to warm the passenger compartment and
at the same time demist the windscreen;
Z to demist and defrost the windscreen and

side front windows.

F0I0195m

HEATING
Proceed as follows:
❒ rotate knob (A) (pointer on -) completely to the right;
❒ turn knob (C) to the required speed;
❒ move knob (D) to:
≤ to warm the feet and at the same time demist the
windscreen;
μ to warm the feet and convey cooler air from central vents
and dashboard outlets;
w for quick heating.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

¥ air flow from central vents and side

INDEX

Knob (D) directs the air inside the passenger
compartment according to five levels:

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CLIMATIC COMFORT

65

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

Preventive demisting procedure

Proceed as follows:
❒ turn knob (A) to -;

In the event of considerable outside moisture and/or
rain and/or considerable differences in temperature
inside and outside the passenger compartment,
perform the following preventive demisting procedure:

❒ turn knob (C) to 4 -;

❒ slider (B) at Y;

❒ turn knob (D) to w.

❒ turn knob (A) to -;

❒ close all dashboard vents;

QUICK WINDSCREEN AND FRONT SIDE
WINDOW DEMISTING/DEFROSTING
(MAX-DEF function)
Proceed as follows:

❒ turn knob (C) to 2;
❒ turn knob (D) to Z or to ≤ if the windows do not
mist up.

❒ turn knob (A) to -;

REAR WINDOW AND DOOR MIRROR
DEMISTING/DEFROSTING (where required)

❒ turn knob (C) to 4 -;

Press ( to turn this function on.

❒ turn knob (D) to Z;

Activation is indicated by the turning on of the warning
light ( on the instrument panel.

❒ slider (B) at Y.
After demisting/defrosting, operate the controls to
restore the required comfort.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

QUICK HEATING

66

Downloaded from www.Manualslib.com manuals search engine

This function is timed and switches off automatically
after 30 minutes. To cut out this function press again
button (.
IMPORTANT Do not apply stickers on the inside of
the rear window over the heating filaments to avoid
damage that might cause it to stop working properly.

❒ open completely central vents and side outlets;

This function is particularly useful when the outside air
is heavily polluted (in a traffic jam, tunnel, etc.).
However, it is better not to use it for long periods,
especially if there are several people in the car.

❒ turn knob (A) to the blue sector;
❒ slider (B) at Y;
❒ turn knob (C) to the required speed;

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

❒ turn knob (D) to ¥.

IMPORTANT The inside air recirculation system
makes it possible to reach the required “heating” or
“cooling” conditions faster. Do not use the air
recirculation function on rainy/cold days as it would
considerably increase the possibility of the windows
misting inside.

DASHBOARD
AND
CONTROLS

Move slider (B) to T.

SAFETY
DEVICES

Proceed as follows:

CORRECT USE
OF THE CAR

RECIRCULATION

WARNING
LIGHTS AND
MESSAGES

FAN SPEED ADJUSTMENT

67

Downloaded from www.Manualslib.com manuals search engine

w to speed up passenger compartment

warming;
≤ to warm the passenger compartment and
at the same time demist the windscreen;
Z to demist and defrost the windscreen and
side front windows.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

MANUAL CLIMATE CONTROL SYSTEM (where provided)

68

A

B

C

D
F0I0131m

CONTROLS
(A): Air temperature knob (mixing hot and cold air);
(B): Air recirculation on/off button;
(C): Fan knob and climate control system on/off;
(D): Air distribution knob.
CLIMATIC COMFORT
Knob (D) directs the air inside the passenger compartment
according to five levels:
¥ air flow from central vents and side outlets;
μ to warm the feet and keep the face cool (“bilevel” function)

Downloaded from www.Manualslib.com manuals search engine

HEATING
Proceed as follows:
❒ rotate knob (A) (pointer on -)
completely to the right;
❒ turn knob (C) to the required speed;
❒ move knob (D) to:
≤ to warm the feet and at the same time
demist the windscreen;
μ to warm the feet and convey cooler air
from central vents and dashboard
outlets;
w for quick heating.

❒ turn knob (D) to μ.

❒ turn knob (A) to -;

QUICK WINDSCREEN AND FRONT SIDE
WINDOW DEMISTING/DEFROSTING
(MAX-DEF function)
Proceed as follows:

❒ turn knob (C) to 2;
❒ turn knob (D) to Z or to ≤ if the windows do not
mist up.

❒ turn knob (A) to -;

REAR WINDOW AND DOOR MIRROR
DEMISTING/DEFROSTING (where required)

❒ turn knob (C) to 4 -;

Press ( to turn this function on.

❒ turn knob (D) to Z;

Activation is indicated by the turning on of the warning
light ( on the instrument panel.

❒ slider (B) at Y.
After demisting/defrosting, operate the controls to
restore the required comfort.

IMPORTANT Do not apply stickers on the inside of
the rear window over the heating filaments to avoid
damage that might cause it to stop working properly.

INDEX

IMPORTANT Climate control system is very useful to
speed up demisting since it dehumidifies the air. Set
controls to demisting function as described previously
and switch on the climate control system by pressing
knob (C).

This function is timed and switches off automatically
after 30 minutes. To cut out this function press again
button (.

DASHBOARD
AND
CONTROLS

❒ slider (B) at Y;

SAFETY
DEVICES

❒ turn knob (C) to 4 -;

❒ close all dashboard vents;

CORRECT USE
OF THE CAR

❒ turn knob (A) to -;

In the event of considerable outside moisture and/or
rain and/or considerable differences in temperature
inside and outside the passenger compartment,
perform the following preventive demisting procedure:

WARNING
LIGHTS AND
MESSAGES

Proceed as follows:

IN AN
EMERGENCY

Preventive demisting procedure

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

QUICK HEATING

69

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

CLIMATE CONTROL (cooling)

Proceed as follows:

Proceed as follows:

❒ open completely central vents and side outlets;

❒ turn knob (A) to the blue sector;

❒ turn knob (A) to the blue sector;

❒ turn knob (C) to 4 -;

❒ slider (B) at Y;

❒ slider (B) at T;

❒ turn knob (C) to the required speed;

❒ turn knob (D) to ¥;

❒ turn knob (D) to ¥;

❒ press knob (C).

RECIRCULATION

Cooling adjustment

Move slider (B) to T.

Proceed as follows:

This function is particularly useful when the outside air
is heavily polluted (in a traffic jam, tunnel, etc.).
However, it is better not to use it for long periods,
especially if there are several people in the car.

❒ slider (B) at Y;

IMPORTANT The inside air recirculation system
makes it possible to reach the required “heating” or
“cooling” conditions faster. Do not use the air
recirculation function on rainy/cold days as it would
considerably increase the possibility of the windows
misting inside.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

FAN SPEED ADJUSTMENT

70

Downloaded from www.Manualslib.com manuals search engine

❒ Turn knob (A) to the right to raise temperature;
❒ Turn knob (C) to the left to reduce the fan speed.
LOOKING AFTER THE SYSTEM
During the winter, the climate control system must be
turned on at least once a month for about ten
minutes. Before summer, have the system checked at a
Fiat Dealership.

DASHBOARD
AND
CONTROLS

AUTOMATIC TWO-ZONE CLIMATE CONTROL SYSTEM (DUALZONE)
(where provided)

SAFETY
DEVICES

DESCRIPTION

CORRECT USE
OF THE CAR

The car is fitted with a two-zone climate
control system which makes it possible to
separately adjust the air temperature on the
driver’s side and on the passenger’s side.
CONTROLS

(C): Passenger compartment temperature
sensor
(D): MAX-DEF function button (front window
fast defrosting/demisting)

F0I0053m

(E): Air recirculation on/off button

(H): Knobs for adjusting fan speed

(F): Button for aligning the temperature set
on the passenger’s side with that on the
driver’s side (MONO) and knob to adjust
temperature on passenger side

(I): Climate control compressor on/off button

INDEX

(G): Two-zone climate control on/off button

(L): Button for selecting the system automatic mode (AUTO) and
knob to adjust temperature on driver side

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

(B): Display showing climate control system
data

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

(A): Air distribution selection button

71

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

HOW TO USE THE AUTOMATIC
FUNCTION (AUTO)

The system can be started in different ways, but it is
advisable to set the temperatures required on the
display; then press button AUTO.

Press button AUTO; the system will automatically
adjust:

It is possible to personalise required temperatures
(driver and passenger) with a maximum difference of
7°C.

❒ air distribution in the passenger’s compartment;

The climate control system compressor works only
with the engine running and outside temperature over
4°C.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SWITCHING THE CLIMATE CONTROL
SYSTEM ON

❒ air inlet in the passenger’s compartment;
thus cancelling all the previous manual adjustments.
When the climate control system is working
automatically, FULL AUTO is displayed. It is possible
to personalise the choices made automatically by the
system intervening manually on the following controls:
❒ fan speed adjustment knob;

IN AN
EMERGENCY

❒ air distribution selection button;
❒ inside air recirculation on/off ;

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

❒ climate control compressor button.

WARNING

It is inadvisable to use the inside air recirculation feature with low outside
temperature as the windows might mist over quickly.

72

Downloaded from www.Manualslib.com manuals search engine

❒ max fan speed = all bars lit
❒ min fan speed = one bar lit.
The fan can be cut off (all bars off) only if the climate
control compressor has been switched off pressing
button ò.
To restore automatic fan speed control, after a manual
adjustment, press button AUTO.
AIR TEMPERATURE ADJUSTMENT KNOBS
Turning knobs (L) or (F) clockwise or counterclockwise, respectively highers or lowers the air
temperature on driver’s side (knob L) or passenger’s
side (knob F). The temperatures set are shown on
the display.

HI function takes air distribution to Z and fan speed as
set by the system.
IMPORTANT This function is inadvisable with the
engine cold to prevent admitting air that is not warm
enough to the passenger compartment.
To switch the system off, simply turn the ring of knob
(L) or (F) of the temperature set value below 32°C;
the display shows 32°C.
Pressing the AUTO key the display will show a
temperature of 32°C and returns to an operating
condition with automatic temperature adjustment.

DASHBOARD
AND
CONTROLS
INDEX

Turning knobs clockwise or counter-clockwise until
they reach the extreme selections HI or LO, the
maximum heating or cooling functions are respectively
engaged.

This function can be engaged when requiring to heat
the passenger compartment as quickly as possible. All
manual settings are however possible with this
function on.

SAFETY
DEVICES

The 12 selectable speeds are shown by the lighting up
of the bars on the climate control system display:

CORRECT USE
OF THE CAR

This is turned on setting on the display a temperature
above 32°C and can be activated independently from
the driver’s or passenger’s side or both; this setting
brings the system to the “monozone” mode, the
display will show HI.

WARNING
LIGHTS AND
MESSAGES

Press button p to adjust the fan speed.

IN AN
EMERGENCY

HI function (maximum heating power)

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

FAN SPEED ADJUSTMENT

73

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

This is turned on setting on the display a temperature
below 16°C, the display will show LO.
This function can be engaged when requiring to cool
the passenger compartment as quickly as possible.
The function cuts off air heating, engages inside air recirculation (to prevent admitting hot air to the
passenger compartment) and the climate control
compressor, takes air distribution to E and fan speed
as set by the system.
All manual settings are however possible with this
function on.
To switch the function off, simply turn knob (L) or (F)
of the temperature set on a value above 16°C; the
display will show 16°C.
Pressing the AUTO key the display will show a
temperature of 16°C and returns to an operating
condition with automatic temperature adjustment.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

LO function (highest cooling power)

74

Downloaded from www.Manualslib.com manuals search engine

FAST FRONT WINDOW
DEMISTING/DEFROSTING
(MAX-DEF function)
Pressing button - the climate control automatically
activates timed operation of all the functions required
to quicken demisting/defrosting of the windscreen and
front side windows, i.e.:
❒ switches on climate control compressor if outside
temperature exceeds 4°C);
❒ switches off air recirculation, if previously on,
(button T led off);
❒ switches on heated rear window (- button led on)
and door mirror coils (where required);
❒ sets max air temperature;
❒ activates proper air flow;
❒ sets min. fan speed.
IMPORTANT Press button T to obtain outside air
inlet into passenger compartment.

❒ automatic control, indicated by button T led off;
❒ forced switching off (inside air recirculation always
off with air inlet from outside) (T button led off;
❒ forced switching on (inside air recirculation always
on with air inlet from outside)(T button led on).

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Pressing button OFF, the climate control system turns
on automatically the inside air recirculation function
(T button led on). In these conditions it is however
possible to take air from the outside (and vice versa)
pressing button T (button led off).

SAFETY
DEVICES

Inside air recirculation is controlled by three operating
logics:

CORRECT USE
OF THE CAR

Press button T.

IMPORTANT The inside air recirculation system
makes it possible to reach the required “heating” or
“cooling” conditions faster. It is however inadvisable to
use it on rainy/cold days as it would considerably
increase the possibility of the windows misting inside,
especially if the climate control system is off.
It is advisable to turn on the inside air recirculation
system in queues or tunnels to avoid admitting
polluted air from outside. The prolonged use of this
function should however be avoided, especially with
several persons on board, to avoid the possibility of
the windows misting inside.

WARNING
LIGHTS AND
MESSAGES

RECIRCULATION

75

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

CLIMATE CONTROL
COMPRESSOR ON/OFF

Pressing button MONO automatically aligns the
temperature on the passenger’s side with that on the
driver’s side.

Press button ò to switch on the climate control
compressor.

Turn the knob AUTO or MONO to raise/reduce the
temperature between the two zones by the same
value.

Compressor on

Press again MONO or turn the knob to disable the
function.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

MONO BUTTON FOR THE ALIGNMENT OF
SET TEMPERATURES

76

Downloaded from www.Manualslib.com manuals search engine

❒ ò button led on;
❒ symbol ò lit on display.
Compressor off
❒ ò button led off;
❒ symbol ò off the display.
With the climate control compressor off, it is not
possible to admit air to the passenger compartment
with a temperature below the outside temperature; in
this case the warning light ò flashes on the display.
To restore automatic control for switching on the
climate control compressor, press button ò or
AUTO: in which case, however, the other manual
settings set will be cancelled.

Air flow towards the front and rear lower parts of
the passenger compartment. This type of distribution allows heating of the passenger compartment in the shortest time.

E
Q
Z

Air flow to the dashboard centre and side outlets
(passenger’s body).
Splitting of the air flow between feet vents and
windscreen and front side window demisting/defrosting vents. This type of air distribution allows
satisfactory heating of the passenger compartment
while preventing possible misting of the windows.

Splitting of the air flow between feet vents (warZE mest air) and the dashboard centre and side ou-

SWITCHING THE CLIMATE CONTROL
SYSTEM OFF
Press button OFF. With climate control system off,
OFF button and T button leds are off.

DASHBOARD
AND
CONTROLS
INDEX

tlets and the rear outlet (coolest air).

To restore automatic air distribution control after a
manual selection, press button AUTO.

SAFETY
DEVICES

Z

IMPORTANT To switch the system on again, press
button OFF.

CORRECT USE
OF THE CAR

Air flow to the windscreen and front side window
vents to demist or defrost them.

WARNING
LIGHTS AND
MESSAGES

Q

IN AN
EMERGENCY

Pressing one or more buttons Q/E/Z it is possible to
choose manually 5 of the possible air distributions to
the passenger compartment:

IMPORTANT For operation of the climate control
system, at least one of buttons Q/E/Z shall be
activated. Deactivation of all Q/E/Z buttons is
therefore not enabled by the system.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

AIR DISTRIBUTION SELECTION

77

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

EXTERNAL LIGHTS
The left-hand stalk controls the external lights and the direction
indicators.

SIDELIGHTS
F0I0065m

DIPPED BEAM HEADLIGHTS
Turn the knurled ring to 2.
The warning light 3 on the instrument cluster will come on.

IN AN
EMERGENCY

With dipped beam and front fog lights on, turning on the main beam
headlights will turn off automatically the dipped beam headlights.
MAIN BEAM HEADLIGHTS
F0I0066m

Downloaded from www.Manualslib.com manuals search engine

When the knurled ring is at 2 push the lever towards the dashboard
(stable position).
The warning light 1 on the instrument cluster will come on.
Pulling the lever towards the steering wheel again, the main beams are
turned off and the dipped beams on.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

78

Turn the knurled ring to 6.
The warning light 3 on the instrument cluster will come on.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The external lights can only be switched on when the ignition key is at
MAR.

F0I0067m

DASHBOARD
AND
CONTROLS

FLASHING THE HEADLIGHTS
Pull the lever towards the steering wheel (unstable position) regardless of
the position of the knurled ring.

SAFETY
DEVICES

Instrument panel warning light 1 will turn on.
DIRECTION INDICATORS

F0I0068m

❒ down (position 2): engage the left-hand direction indicator.

WARNING
LIGHTS AND
MESSAGES

Warning light Î or ¥ will come on flashing on the instrument cluster at
the same time.
Indicators are switched off automatically when the steering wheel is
straightened.

IN AN
EMERGENCY

If you want the indicator to flash briefly to show that you are about to
change lane, move the stalk up or down without clicking into position
(unstable position). When released the stalk will return to its home
position.

INDEX

F0I0069m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

❒ up (position 1): engage the right-hand direction indicator;

CORRECT USE
OF THE CAR

Push the lever to stable position:

79

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

“FOLLOW ME HOME” DEVICE
This function allows the illumination of the space in front of the car.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Activation

80

Downloaded from www.Manualslib.com manuals search engine

With the ignition key at STOP or removed, pull the left-hand stalk
towards the steering wheel and operate it within 2 minutes from when
the engine is turned off.
F0I0068m

At each single movement of the stalk, the staying on of the lights is
extended by 30 seconds up to a maximum of 3,5minutes, then the lights
are switched off automatically.
Each time the lever is operated, the instrument panel warning light 3
turns on and the display will show the function activation time.
The warning light 3 will turn on the first time the stalk is operated and
it will stay on until the function is automatically deactivated. Each stalk
operation will just extend the staying on of the lights.
Deactivation
Keep the stalk pulled towards the steering wheel for more than 2
seconds.

DASHBOARD
AND
CONTROLS

WINDOW WASHING
WINDSCREEN WASHER/WIPER

SAFETY
DEVICES

This device can only work when the ignition key is at MAR.
The stalk can be moved to five different positions:

CORRECT USE
OF THE CAR

(A): windscreen wiper off
(B): flick wipe: on certain versions, turning the knurled ring (F), four
possible intermittent speeds are obtained (slowest to fastest).

= very slow intermittent
= slow intermittent

■■■

= intermittent medium

■■■■

IN AN
EMERGENCY

■■

= fast intermittent

(C): continuous slow;
(D): continuous fast;
(E): fast temporary (unstable position).

INDEX

Operation in position (E) is limited to the time the lever is held in this
position. When the lever is released, it returns to position (A)
automatically stopping the wiper.

F0I0096m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE



WARNING
LIGHTS AND
MESSAGES

With the stalk in position (B), turning the knurled ring (F), four possible
intermittent speeds are obtained:

81

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

“Smart washing” function
Pulling the stalk towards the steering wheel (unstable position) operates
the windscreen washer; indeed, the latter comes into action
automatically if the stalk is pulled for more than half a second.

,

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The wiper stops working three strokes after releasing the stalk. On
certain versions a further “cleaning stroke”, after a few seconds,
completes the wiping operation.
Operating the stalk quickly and repeatedly (for less than half a second) it
is possible to wet the windscreen several times without operating the
wiper.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0159m

Never use the window wiper to remove ice or snow from the windscreen.
In these conditions, the wiper is submitted to excessive effort that results in motor protection
cutting in and wiper operation inhibition for few seconds as a consequence. If operation is not
restored contact Fiat Dealership.

82

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

RAIN SENSOR (where provided)

The sensor has a range of adjustment that gradually varies between wiper
stationary (no wiping) when the windscreen is dry, to wiper at first
continuous speed (continuous slow) with heavy rain.
F0I0077m

Activation

WARNING
LIGHTS AND
MESSAGES

Move the right-hand stalk downwards by one position.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The rain sensor is behind the driving mirror in contact with the
windscreen and has the purpose of automatically adjust, during the
intermittent operation, the frequency of the windscreen wiper strokes as
to the rain intensity.

The activation of the rain sensor is signalled by a control acquisition
“stroke”.
IMPORTANT Keep clean the glass in the sensor area.

IN AN
EMERGENCY

Turning the knurled ring (F) it is possible to increase the sensitivity of the
rain sensor, obtaining a quicker change from stationary (no wiping) when
the windscreen is dry, to first continuous speed (continuous, slow).

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The increase of the sensitivity of the rain sensor is signalled by a control
and acquisition “cycle”.

INDEX

Operating the windscreen washer with the rain sensor activated the
normal washing cycle is performed at the end of which the rain sensor
resumes its normal automatic function.

F0I0096m

83

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

Turn the ignition key to STOP.
At the following starting operation (key at MAR), the
sensor will not be reactivated even is the stalk is on
(B). In this event, to activate the rain sensor, you have
to move the stalk to (A) or (C) and then again to (B).
When the rain sensor is again activated in this way, at
least one windscreen wiper stroke occurs, even if the
windscreen is dry.

The rain sensor is able to recognize and automatically
adjust itself in the presence of the following particular
conditions:
❒ impurities on the controlled surface (salt, dirt, etc.);
❒ straks of water caused by worn wiper blades;
❒ difference between day and night.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Deactivation

Do not activate the rain sensor when washing the car in an automatic washing station.

In the event of ice on the windscreen, make sure to have disconnected the device.

WARNING

Make sure the device is off when cleaning the windscreen.

84

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

REAR WINDOW WASH/WIPE FUNCTION
This device can only work when the ignition key is at MAR.

On certain versions the rear window and windscreen wiping strokes are
synchronised.
“Smart washing” function
F0I0157m

IN AN
EMERGENCY

,

HEADLIGHT WASHERS
They are activated automatically when the windscreen washer is
operated with dipped beam headlights or main beam headlights on.

F0I0158m

IMPORTANT Regularly check that the spray jets are intact and clean.

INDEX

Never use the rear window wiper to remove ice or snow
from the rear window. In these conditions, the wiper is
submitted to excessive effort that results in motor
protection cutting in and wiper operation inhibition for few
seconds as a consequence. If operation is not restored
contact Fiat Dealership.
F0I0207m

Downloaded from www.Manualslib.com manuals search engine

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The wiper stops working three strokes after releasing the stalk. On
certain versions a further “cleaning stroke”, after a few seconds,
completes the wiping operation.

WARNING
LIGHTS AND
MESSAGES

On certain versions, pulling the stalk towards the dashboard, with just
one movement it is possible to operate the washer jet and the wiper at
the same time; indeed, the latter comes into action automatically if the
stalk is pulled for more than half a second.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

To switch the rear window wiper on, turn the knurled ring from O to
'. To wash the window push the stalk towards the dashboard.

85

Î

DASHBOARD
AND
CONTROLS

CRUISE CONTROL (where provided)
It is a device able to support the driver, with electronic control, which
allows driving at speed over 30 km/h on long and straight dry roads (e.g.:
motorways), at a desired speed, without pressing the accelerator pedal.
Therefore it is not suggested to use this device on extra-urban roads
with traffic. Do not use it in town.

OFF

Î

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

ON

86

Downloaded from www.Manualslib.com manuals search engine

DEVICE ENGAGEMENT
F0I0156m

Turn knurled ring (A) to ON.
The device may only be engaged in the 4th or 5th or 6th gear. Travelling
downhill with the device engaged, the car speed may increase more than
the memorised one.
When the device is activated, the warning light Ü on the instrument
cluster turns on together with the message on the reconfigurable
multifunction display (where provided) (see section “Warning lights and
messages”).

❒ turn the knurled ring (B) to (+) for at least three
seconds, then release it. The car speed is
memorised and it is therefore possible to release
the accelerator pedal.
In the case of need (when overtaking for instance)
acceleration is possible simply pressing the accelerator
pedal; later, releasing the accelerator pedal, the car
will return to the speed memorised previously.

❒ accelerate gradually until reaching a speed
approaching the one memorised;
❒ engage the gear selected at the time of speed
memorising (4th or 5th or 6th gear);
❒ press the RES button (C).
TO INCREASE THE MEMORISED SPEED
The speed memorised can be increased in two ways:
❒ pressing the accelerator and then memorising the
new speed reached;
or
❒ momentaneously turning the ring (B) to (+).

DASHBOARD
AND
CONTROLS
INDEX

Each pulse of the ring will correspond to a slight
increase in speed (about 1 km/h), while pressing
continuously will correspond to a continuous speed
increase.

SAFETY
DEVICES

❒ turn the knurled ring (A) to ON and press the
accelerator pedal to the required speed;

CORRECT USE
OF THE CAR

If the device has been disengaged for example pressing
the brake or clutch pedal, the memorised speed can
be reset as follows:

WARNING
LIGHTS AND
MESSAGES

Proceed as follows:

IN AN
EMERGENCY

TO RESET THE MEMORISED SPEED

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

TO MEMORISE SPEED

87

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

DEVICE DISENGAGEMENT

The speed memorised can be increased in two ways:

Turn the ring (A) to OFF or the ignition key to STOP.
The device is automatically deactivated also in one of
the following cases:

❒ disengaging the device and then memorising the new
speed;
or
❒ keeping the ring (B) pressed at (–) until reaching the
new speed which will be memorised automatically.
Each pulse of the ring will correspond to a slight
reduction in speed (about 1 km/h), while pressing
continuously will correspond to a continuous speed
reduction.

❒ pressing the brake or clutch pedal;
❒ ESP or ASR systems cut-in (where provided);
❒ gearshifting in versions with Dualogic automatic
transmission (where provided);
❒ unvoluntarily moving the Dualogic lever (where
provided) to (N).

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING

When travelling with the device on, do not put the gearbox lever in neutral and do
not shift the Dualogic gearbox lever (where provided) to (N).

INDEX

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

TO REDUCE MEMORISED SPEED

WARNING

In the event of device malfunction or failure, turn the knurled ring (A) to OFF and
contact a Fiat Dealership after checking the protective fuse integrity.

88

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

CEILING LIGHTS
FRONT CEILING LIGHT

The light will come on automatically when a front door is opened and go
out when the door is closed.
F0I0088m

WARNING
LIGHTS AND
MESSAGES

With map reading lights
Press switch (A) to switch the light on and off.
Switch (B) operates the map reading light.

With switch (A) pressed to the left, lights (C) and (D) are off and they
will not come on when doors are opened.
With switch (A) pressed to the right, lights (C) and (D) will come on
regardless of the position of the doors.
On certain versions, lights come on/off gradually.
With light off, switch (B) turn on the following lights:
❒ map reading light (C) if pressed to the left;
❒ map reading light (D) if pressed to the right.
IMPORTANT Make sure that both switches are in central position
before getting out of the car. This ensures that lights go out when the
doors are closed preventing the battery from running down.

F0I0089m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

With switch (A) in central position, lights (C) and (D) will come on/off
when doors are opened/closed.

INDEX

Press the short side of the lens to switch the light on and off when the
doors are closed, as shown in the figure.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

With toggling lens

89

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

Timing for getting out of the car

Two timing strategies are available on certain versions,
in order to facilitate getting in and out of the car,
especially at night in dark areas.

The ceiling lights will come on as follows when the key
is removed from the ignition switch:

Timing for getting into the car
The ceiling lights will come on as follows:
❒ for about 10 seconds when the front doors are
unlocked;
❒ for about 3 minutes when one of the side doors is
opened;
❒ for about 10 seconds when a door is closed (within
the three minutes).
Timing will be stopped when the ignition key is turned
to MAR.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Ceiling light timing

90

Downloaded from www.Manualslib.com manuals search engine

❒ for about 10 seconds within two minutes after
stopping the engine;
❒ for about 3 minutes when one of the side doors is
opened;
❒ for about 7 minutes when a door is closed (within
the three minutes).
The timeout will automatically end when the doors are
locked.

DASHBOARD
AND
CONTROLS

CONTROLS
HAZARD LIGHTS

Press button 5; to activate these lights it is necessary to have the
side/taillights switched on and warning light 5 on the cluster come on.
Press the button again to turn these lights off.
REAR FOG LIGHT
Press button 4; to activate this light it is necessary to have the dipped
beam headlights switched onand warning light 4 on the cluster come on.
Press the button again to turn these lights off.
HEATED REAR WINDOW
Press button ( to turn it on. The device is automatically switched off
after about 20 minutes.

WARNING

The use of hazard lights is governed by the Road Traffic Code of the country you
are in. Keep to the rules.

WARNING
LIGHTS AND
MESSAGES

FRONT FOG LIGHTS (where provided)

IN AN
EMERGENCY

F0I0076m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Press the switch again to turn the lights off.

INDEX

When the device is on, the switch is flashing and warning lights Î and ¥
on the cluster come on.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

They come on when switch r is pressed regardless of the position of
the ignition key.

91

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

FUEL CUT-OFF SWITCH (FIS)
It is located under the dashboard on the front right-hand door pillar and
it comes into operation in the case of an accident to block the supply of
fuel thereby stopping the engine.

SAFETY
DEVICES

Carefully inspect the car to find fuel leaks, e.g. in the engine
compartment, under the car or near the tank.

CORRECT USE
OF THE CAR

If no fuel leaks are found and the car can be started again, press button
(A) to reset the fuel system and the lights.
After a crash, remember to turn the ignition key to STOP to prevent
battery run-down.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0081m

WARNING

If, after a crash, you smell fuel or see leaks from the fuel system, do not reset the
switch to avoid fire risk.

92

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

INTERIOR FITTINGS
GLOVE COMPARTMENT

F0I0079m

WARNING
LIGHTS AND
MESSAGES

COIN TRAY

MAGNETIC CARD/TICKET SLOTS

Do not travel with the glove compartment
open: risk of passengers’ injury in case of
accident.

INDEX

WARNING

F0I0086m

F0I0087m

Downloaded from www.Manualslib.com manuals search engine

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

A coin tray may be found on the dashboard on the central tunnel
according to the versions.

The slots for holding magnetic cards and tickets (phone card, toll slips,
etc.) can be found on the central tunnel unit.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Operate handle (A) as shown by the arrow to open the compartment.

93

DASHBOARD
AND
CONTROLS

CIGAR LIGHTER
Press button (A) with ignition key at MAR.

IMPORTANT Always check that the cigar lighter has turned off.
IMPORTANT The cigar lighter gets very hot. Handle it with care and
make sure that it is not used by children: danger of fire and/or burns.
F0I0197m

ASHTRAY
For front passengers

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

After approx. 15 seconds it will return to its initial position and is ready
for use.

Pull the flap towards yourself. Remove the ashtray (B) by pulling it
upwards as shown by the arrow for emptying it.

For rear passengers there is a concealed ashtray set on the central
console.
F0I0080m

94

Downloaded from www.Manualslib.com manuals search engine

Pull it as shown by the arrows for use and removal.
IMPORTANT Do not use the ashtray as waste paper basket: it might set
on fire in contact with cigarettes stub.
Non smokers can remove both the front and rear ashtrays and use the
handy oddment compartment which results.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

For rear passengers

F0I0052m

DASHBOARD
AND
CONTROLS

SUN VISORS
They are located at the sides of the driving mirror. They can be adjusted
forwards and sidewards (this last adjustment is not possible on versions
fitted with Front window bag).
On some versions, the driver’s sun visor is fitted on the back with a
courtesy mirror: Lift the lid (A) to use the mirror.
F0I0082m

The windows open outwards:

WARNING
LIGHTS AND
MESSAGES

❒ move the lever as shown in the figure;
❒ push the lever outwards to open the window completely;
❒ push the lever back until it clicks.

IN AN
EMERGENCY

To close the windows, pull the lever to the opposite direction until it
clicks.

INDEX

F0I0083m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

REAR SIDE WINDOWS (three door versions)

CORRECT USE
OF THE CAR

SAFETY
DEVICES

A courtesy mirror is applied to the back of the passenger’s side sun visor.

95

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

SUNROOF (where provided)
It is controlled electrically and it will only work when the ignition key is
at MAR.

SUNROOF OPENING
Full opening
Press switch to (A) (symbol).
“Spoiler” position
Press switch to (B), this is only possible when the roof is closed.
SUNROOF CLOSING

A sliding sunshade is fitted to lessen the effect of sun rays in the
passenger compartment.

INDEX

IN AN
EMERGENCY

F0I0084m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Sunroof is controlled by a switch. When you release it the roof locks in
the position it is at that moment.

96

Downloaded from www.Manualslib.com manuals search engine

Press switch to (B). Press to (A) (symbol) when the roof is in spoiler
position.

DASHBOARD
AND
CONTROLS

EMERGENCY OPERATION
If the switch does not work, the sunroof can be operated manually as
follows:
❒ insert the screwdriver provided into (C);
❒ when fully open, turn the screwdriver half a turn back until it clicks,
then remove the screwdriver.

Do not open the sunroof if there is snow or ice on it: it could be damaged.

WARNING

When leaving the car, the ignition key should be removed to prevent the sunroof
from being operated inadvertently and harming anyone remaining in the car.
Improper use of the sunroof can be dangerous. Before and during its operation
ensure that any passengers are not at risk from the moving roof either by
personal objects getting caught in the mechanism or by being injured by it
directly.

INDEX

F0I0094m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0085m

CORRECT USE
OF THE CAR

SAFETY
DEVICES

❒ remove (A) operating from points (B) shown by the arrows;

97

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

CENTRAL DOOR LOCKING SYSTEM
From the outside
With the doors closed, fit and turn the key in one of
the front door locks.
From the inside
With the doors closed, press (to lock) or lift (to
unlock) one of the front door knobs.
The rear door knobs will lock or unlock only the
specific door.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

DOORS

98

Downloaded from www.Manualslib.com manuals search engine

IMPORTANT If one of the doors is not shut properly
or there is a failure in the system, the central locking
feature will cut out and after some attempts the device
stops working for about two minutes. In these 2
minutes, the doors can be locked or unlocked
manually. After the two minutes, the control unit is
ready to receive commands once more.
If the cause of the failure is removed, the device will
start working properly.

DASHBOARD
AND
CONTROLS

CHILD LOCK (5-door versions)
To prevent opening the rear doors from the inside.
This device can be engaged only with doors open:

The device is engaged even if the doors are unlocked by the centralised
system.
IMPORTANT Always use the lock when transporting children.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

IMPORTANT After engaging the lock, check by trying to open a rear
door with the internal handle.

F0I0129m

WARNING
LIGHTS AND
MESSAGES

❒ position 2 - disengaged (door openable from inside).

CORRECT USE
OF THE CAR

SAFETY
DEVICES

❒ position 1 - engaged (door locked);

99

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

POWER WINDOWS (where provided)
CONTROLS

SAFETY
DEVICES

Power windows are controlled by two switches located on the
dashboard when the key is at MAR:
(A): to open/close the front left-hand window;

CORRECT USE
OF THE CAR

(B): to open/close the front right-hand window;
F0I0154m

WARNING
LIGHTS AND
MESSAGES

❒ to open/close front windows within about 2 minutes with key at STOP
or removed (with side doors closed);
❒ to press button (A) for longer than half a second to activate the
automatic operation of the driver’s window: the window will stop
when it reaches the end of its travel or until the button is pressed
again.

IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

On certain versions the following is also possible:

WARNING

Improper use of the electric windows can be dangerous. Before and during their
operation ensure that any passengers are not at risk from the moving glass either
by personal objects getting caught in the mechanism or by being injured by it
directly. Always remove the ignition key when you get out of the car to prevent the
electric windows being operated accidentally and constituting a danger to the
people left in the car.

100

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

BOOT
TAILGATE OPENING

SAFETY
DEVICES

To open the tailgate from outside, turn the ignition key in the lock.
To open the tailgate from the inside, pull lever (A) next to driver’s seat.
Tailgate opening is facilitated by side gas shock springs.

F0I0198m

INDEX

F0I0090m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

On certain versions, opening the boot, the interior boot ceiling light will
come on.

CORRECT USE
OF THE CAR

IMPORTANT Do not operate the lever (A) when the car is travelling.

101

Downloaded from www.Manualslib.com manuals search engine

To close, lower the tailgate until the lock clicks.

If the boot is not shut properly the warning light ´
comes on together with the message on
reconfigurable multifunction display (where provided)
(see “Warning lights and messages” chapter).

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

TAILGATE CLOSING

The addition of objects (speakers, spoilers, etc.) on the rear shelf or boot lid, except those
envisaged by the manufacturer, may prevent the gas filled struts at the sides of the boot from
working properly.

WARNING

WARNING

When using the boot, make sure the loads you are carrying do not exceed the
permitted weight (see section “Technical specifications”). Also make sure the items
in the boot are arranged properly to prevent them being thrown forwards and
injuring passengers should you brake sharply.

Never travel with objects on the rear shelf to prevent them being thrown forwards
and injuring passengers in case of accident or sharp braking.

102

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

EXTENDING THE BOOT

WARNING
LIGHTS AND
MESSAGES

Split rear seat back (where provided)
The boot can be extended completely or partially.
For partial extension fold the required seat side; proceed as follows:

IN AN
EMERGENCY

❒ remove the parcel shelf (see next paragraph);
❒ press the button by the side of the two supports and remove the head
restraints by pulling them upwards;
❒ check that the webbing (A) of each of the two side seat belts is
inserted into the respective belt guiding tongue (B);

F0I0137m

INDEX

❒ release the seat back moving lever (C), then tilt it.

CORRECT USE
OF THE CAR

F0I0268m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Proceed as follows:
❒ fasten the seat buckles to the tabs on the seat back (as shown by
arrows);
❒ check that the webbing (A) of each of the two side seat belts is
inserted into the respective belt guiding catch (B);
❒ release the seat back moving the levers (C) as shown by the arrow.
Tilt it to make a single loading surface with the boot floor.

SAFETY
DEVICES

Single rear seat

103

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

To fold the whole seat, lift the cushion and then tip the seat backs as
described for the rear single seat.
The central three-point seat belt and reel mechanism (where fitted) can
be removed as follows:

SAFETY
DEVICES

❒ press the black button on the buckle (A) if the seat belt is fastened;

CORRECT USE
OF THE CAR

❒ take the central belt slowly to the loop retainer (B) on the upper part
of the seat back and remove the second tongue (C) from the loop
retainer;
❒ remove the first tongue (D) from the loop retainer and fasten it to the
specific pin (E) on the rear pillar panel;

WARNING
LIGHTS AND
MESSAGES

To restore conditions for use:
❒ release the first tongue (D) from pin (E);

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

❒ insert the first tongue (D) in loop retainer (B) without twisting the
belt. Make notch (F) on the belt tongue coincide with the respective
groove on the loop retainer and insert the second tongue (C) in the
loop retainer;

104

Downloaded from www.Manualslib.com manuals search engine

F0I0192m

❒ pull the belt gently through loop retainer (B), and fasten the first
tongue (D) in buckle (A) (grey with black button). Make the two
yellow dots (one on the tongue and one on the buckle) coincide.

DASHBOARD
AND
CONTROLS

REAR WINDOW SHELF REMOVAL
Proceed as follows:

❒ release the shelf eyelets (B) from their recesses (C);
❒ move the shelf towards the inside and turn it as shown in the figure to
remove.
F0I0091m

WARNING
LIGHTS AND
MESSAGES

Once removed, the shelf can be placed sideways between the backs of
the front seats and the cushion of the rear seat that has been tipped
down.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

❒ release the upper ends (A) of the two tie-rods by removing the
eyelets;

INDEX

F0I0092m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

IMPORTANT If there is a fairly heavy load in the boot and you are
travelling at night, it is a good idea to check and adjust the height of the
dipped beam headlights (see “Headlights” in this section).

F0I0093m

Downloaded from www.Manualslib.com manuals search engine

105

DASHBOARD
AND
CONTROLS

RESTORING THE USE OF THE REAR SEAT
Versions with single seat

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Perform operations in a reverse order with respect to what previously
described for the boot extension operation. To prevent buckles from
remaining positioned below the cushion, check whether the buckles are
always coupled to the respective tongues located on the seat back.
Versions with split seat
F0I0091m

WARNING
LIGHTS AND
MESSAGES

Perform operations in a reverse order with respect to what previously
described for the boot extension operation. To prevent buckles from
remaining positioned below the cushion, couple buckles to the respective
side belt branches.

IN AN
EMERGENCY

For versions with lap belt, couple the belt to its buckle and keep it raised
as the cushion is set back to its normal use position.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

For versions with central three-point belt with reel, set the belt back to
use conditions (see previous pages), paying attention that the buckles are
ready for use.

When refitting the parcel shelf, fasten the two side tie-rods (A) passing them on the inside of the
struts.

106

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

BONNET
TO OPEN THE BONNET
❒ pull lever (A) in the direction of the arrow;
❒ press lever (B) as shown by the arrow;
❒ open the bonnet and release the rod (C) from its clip at the same
time. Insert the end of the rod in its recess (D) on the bonnet.

F0I0095m

F0I0236m

D

INDEX

C

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

IMPORTANT Before opening the bonnet, check the windscreen wiper
arms are not lifted from the windscreen.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Proceed as follows:

F0I0056m

Downloaded from www.Manualslib.com manuals search engine

107

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

Proceed as follows:

IMPORTANT Always check that the bonnet is closed
properly to avoid its opening while the car is travelling.

❒ hold the bonnet up with one hand and, with the
other, remove rod (C) from recess (D) replace it in
its clip;
❒ lower the bonnet at approx. 20 cm from the engine
compartment and then let it drop, ensuring that it is
fully closed and not just held in position by the
safety catch. If the bonnet does not close properly
do not push it down but open it again and repeat
the above procedure.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

TO CLOSE THE BONNET

WARNING

For safety reasons the bonnet shall always be perfectly closed when travelling.
Always check for proper bonnet locking. If the bonnet is left inadvertently open,
stop the car immediately and close the bonnet.

WARNING

The bonnet might fall violently if the support rod is not positioned properly.

WARNING

Perform the above operations when the car is stationary.

108

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

ROOF RACK/SKI RACK
FASTENERS

SAFETY
DEVICES

3-door versions

CORRECT USE
OF THE CAR

Move the seal aside in the points shown in the figure to reach the
fasteners.
The rear fasteners are in the areas indicated by the printed Oreference
mark O on the rear side windows.

INDEX

F0I0070m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

To make use of the presetting couplings, remove the retainer (A) by
operating on the relevant catch as shown in the figure.

109

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

5-door versions
Move the seal aside in the points shown in the figure to reach the
fasteners.

SAFETY
DEVICES

The rear fasteners are in the areas indicated by the printed reference
mark O on the rear side windows.
Attach the roof rack brackets to the fasteners.

CORRECT USE
OF THE CAR

To make use of the presetting couplings, remove the retainer (A) by
operating on the relevant catch as shown in the figure.
After few kilometers, check that fastening screws are firmly tightened.

WARNING
LIGHTS AND
MESSAGES

IMPORTANT Follow the instructions provided in the kit to the letter for
both versions (3 and 5 doors).
Fitting should be entrusted to skilled personnel.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

IMPORTANT Never exceed the max. permissible loads (see section
“Technical specifications”).

110

Downloaded from www.Manualslib.com manuals search engine

F0I0071m

Proper adjustment of the headlight beams is of vital importance for your
safety and comfort and also for the other road users. It is also a specific
regulation of the road traffic code. To ensure you and other drivers have
the best visibility conditions when travelling with the headlights on, the
headlights must be set properly.

7

¯

ADJUSTING THE HEADLIGHT BEAM

SAFETY
DEVICES

¯

DASHBOARD
AND
CONTROLS

HEADLIGHTS

0

Contact Fiat Dealership to have the headlights properly adjusted.

ŸΔ

F0I0063m

WARNING
LIGHTS AND
MESSAGES

Check beam aiming every time the load carried changes.
HEADLIGHT SLANT ADJUSTING DEVICE

When the car is loaded, it slopes backwards. This means that the
headlight beam rises. In this case, it is necessary to return it to the
correct position.
To adjust the headlight slant, proceed as follows:
Digital display

F0I0263m

Multifunction display

F0I0264m

❒ hold button (A) pressed to decrease by one position (e.g.: 3 ➨ 2,2 ➨
1,1 ➨ 0).

INDEX

Each position increase corresponds to a beam slant lowering (laden car).

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

The car is fitted with electric headlight slant adjusting device working
with ignition key to MAR and dipped beams on.

❒ hold button (B) pressed to increase by one position (e.g.: 0 ➨ 1,1 ➨
2,2 ➨ 3);

CORRECT USE
OF THE CAR

1

Downloaded from www.Manualslib.com manuals search engine

111

DASHBOARD
AND
CONTROLS

Correct positions as a function of the load

HEADLIGHT ADJUSTMENT ABROAD
Reconfigurable multifunction display

F0I1198g

The dipped beam headlights are adjusted for circulation in the country in
which the vehicle is marketed. In countries with opposite circulation, to
avoid glaring oncoming vehicles it is necessary to cover the areas of the
headlight as shown below; this is done using non-transparent sticker tape.
Figures refer to passing from right-hand drive to left-hand drive.

F0I0259m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Position 0 - one or two people occupying the front seats.
Position 1 - five people.
Position 2 - five people + load in the boot.
Position 3 - driver + maximum permissible load stowed in the boot.
IMPORTANT Check beam aiming every time the load carried changes.

112

Downloaded from www.Manualslib.com manuals search engine

F0I0260m

When braking a slight pulsing accompanied by noise
may be felt on the brake pedal due to the action of the
ABS system.

The ABS exploits the tyre-road grip at the best, but it cannot improve it; you
should therefore take every care when driving on slippery surfaces without taking
unnecessary risks.

WARNING

When the ABS cuts in, and you feel the brake pedal pulsating, do not remove your
foot, but keep it pressed; in doing so you will stop in the shortest amount of space
possible under the current road conditions.

DASHBOARD
AND
CONTROLS
INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

If the ABS system cuts in it is a sign that the grip
between the tyre and the road surface has reached the
limit: you must slow down to match the speed to the
road grip available.

SAFETY
DEVICES

System is completed by EBD (Electronic Braking Force
Distribution), which distributes the braking action
between front and rear wheels.

ABS INTERVENTION

CORRECT USE
OF THE CAR

The car is fitted with an ABS braking system, which
prevents the wheels from locking when braking, makes
the most of road grip and gives the best control when
emergency braking under difficult road conditions.

IMPORTANT To have the maximum efficiency of the
braking system, it is necessary a setting period of
about 500 km: during this period, it is better to avoid
sharp, repeated and prolonged brakes.

WARNING
LIGHTS AND
MESSAGES

ABS SYSTEM (where provided)

113

Downloaded from www.Manualslib.com manuals search engine

EBD failure

If warning light > lights up together with the message
on the reconfigurable multifunction display (where
provided) (see section “Warning lights and messages”)
this indicates a fault in the ABS system.
In this case the braking system will still be effective,
although without the anti-lock device. Drive carefully
to the nearest Fiat Dealership to have the system
checked.

If warning lights > and x light up together with the
message on the reconfigurable multifunction display
(where provided) (see section “Warning lights and
messages”) this indicates a fault in the EBD system.
In this case with sharp braking the rear wheels might
lock too early, with the possibility of skidding. Drive
extremely carefully to the nearest Fiat Dealership to
have the system checked.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

SAFETY
DEVICES

ABS failure

CORRECT USE
OF THE CAR

DASHBOARD
AND
CONTROLS

FAILURE WARNINGS

WARNING

If the warning light x comes on together with the message on the
reconfigurable multifunction display, stop the car immediately and contact
the nearest Fiat Dealership. Fluid leaks from the hydraulic system, in fact,
can compromise the braking system, both traditional systems and systems
with ABS.

114

Downloaded from www.Manualslib.com manuals search engine

EPS SYSTEM OPERATION
The ESP system is automatically inserted when the car
is started and cannot be de-activated.

❒ Uphill: vehicle stationary on a road with gradient
above 2%, engine running, clutch and brake pedals
pressed and gearbox in neutral position or gear
engaged (reverse excluded);
❒ Downhill: stationary on a road with gradient above
2%, engine running, clutch and brake pedals pressed
and reverse engaged.

WARNING

The performance of the ESP system, in terms of active safety should not induce the
driver to take pointless and unnecessary risks. The style of driving must in any case
always be adapted to the conditions of the road surface, visibility and traffic. Road
safety is always the driver’s responsibility.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

It is an integral part of the ESP system and facilitates
starting on an uphill slope. It is automatically activated
in the following conditions:

CORRECT USE
OF THE CAR

HILL HOLDER SYSTEM (where provided)

It is signalled by the blinking of the warning light á on
the instrument panel, to inform the driver that the car
is in critical stability and grip conditions.

WARNING
LIGHTS AND
MESSAGES

ABS INTERVENTION

The ESP system is an electronic system controlling the
car stability in the event of tyre grip loss.

IN AN
EMERGENCY

The ESP system is therefore particularly useful when
grip conditions of the road surfaces changes.

In the event of failure, the ESP system is automatically
disconnected and the instrument panel warning light á
will come on with fixed light together with the
message on the reconfigurable multifunction display
(where provided) (see section “Warning lights and
messages”) and with the ASR OFF button led. In this
case contact a Fiat Dealership as soon as possible.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

FAILURE WARNINGS

INDEX

ESP SYSTEM (Electronic Stability
Program) (where provided)

115

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

Passing 2 seconds without starting, the system will
deactivate automatically and braking power will be
gradually released. At release stage, typical mechanical
brake release sound (indicating that the car is going to
move) can be heard.

Failure warnings
System failure is indicated by warning light * and
relevant message on the reconfigurable multifunction
display (where required) (see section “Warning lights
and messages”).
IMPORTANT The Hill Holder system is not a parking
brake therefore, never leave the car without having
engaged the handbrake, turned the engine off and
engaged the first speed.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

At pickup, the ESP system control unit keeps braking
power against wheels until reaching the engine torque
required for starting (in any case for max. 2 seconds),
thus enabling to move the right foot friendly from the
brake pedal to the accelerator.

WARNING

During the use of the spare wheel, the ESP system carries on working. However,
you must remind that the spare wheel presents dimensions smaller than the
standard tyre and therefore its grip is reduced as to the other car tyres.

WARNING

For correct operation of ESP and ASR systems, the tyres must absolutely be of the
same brand and type on all wheels, in perfect conditions and, above all, of type,
brand and size specified.

116

Downloaded from www.Manualslib.com manuals search engine

In slipping conditions, two different control systems
are activated:

❒ too much power transmitted to the wheels also in
relation to the conditions of the road surface;

❒ if the slipping involves both the driving wheels, the
ASR function intervenes reducing the power
transmitted by the engine;

❒ acceleration on slippery, snowy or frozen surfaces;

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

❒ if the slipping involves only one driving wheel, the
ASR system cuts in automatically braking the wheel
that is slipping.

❒ in the case of loss of grip on a wet surface
(aquaplaning).

SAFETY
DEVICES

❒ slipping of the inner wheel due to the effect of
dynamic load changes or excessive acceleration;

CORRECT USE
OF THE CAR

It’s a function of ESP system and controls the vehicle
drive and cuts in automatically every time one or both
driving wheels slip.

The action of the ASR is particularly helpful in the
following circumstances:

WARNING
LIGHTS AND
MESSAGES

ASR SYSTEM (Antislip Regulation)

117

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

SWITCHING ON/OFF OF THE ASR SYSTEM
The ASR function switches on automatically each time the engine is
started.

SAFETY
DEVICES

When travelling the device can be switched off and on again pressing
switch ASR OFF on the centre console.

CORRECT USE
OF THE CAR

Switching on is indicated by the relevant message on the reconfigurable
multifunction display (where provided) (see section “Warning lights and
messages”).

WARNING
LIGHTS AND
MESSAGES

F0I0153m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

When travelling on snow with snow chains, it may be helpful to turn the
ASR device off: in fact, in these conditions, slipping of the driving wheels
when moving off makes it possible to obtain better drive.

WARNING
INDEX

When the device is switched off this is shown by the lighting up of the led
on the ASR OFF button and by the message on the reconfigurable
multifunction display (see section “Warning lights and messages”).
If the ASR function is switched off when travelling, it will turn on again
automatically the next time the engine is started

The performance of the system, in terms of active safety should not induce the
driver to take pointless and unnecessary risks. The style of driving must in any case
always be adapted to the conditions of the road surface, visibility an traffic. Road
safety is always the driver’s responsibility.

118

Downloaded from www.Manualslib.com manuals search engine

The objective is:
❒ to keep system efficiency under control;
❒ warn when a fault causes emission levels to increase;
❒ warn of the need to replace deteriorated
components.

If turning the ignition key to MAR, the warning light U does not turn on or if, while travelling it
turns on glowing steadily or flashing together with the message on the reconfigurable multifunction
display (where required), contact Fiat Dealership as soon as possible. Warning light U operation
can be checked by means of special equipment. Always comply with the traffic regulations in force
in the country where you are travelling.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

IMPORTANT After eliminating the inconvenience, to
check the system completely, Fiat Dealership is obliged
to run a bench test and, if necessary, road tests which
may also call for a long journey.

IN AN
EMERGENCY

It also alerts the driver, by the turning on of the
warning light U on the instrument panel together
with the message on the reconfigurable multifunction
display (where required) (see section “Warning lights
and messages”), when these conditions are no longer
in peak conditions.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The EOBD system (European On Board Diagnosis)
allows continuos diagnosis of the components of the
car correlated with emissions.

The system has a diagnostic connector that can be
interfaced with appropriate tools, which makes it
possible to read the error codes stored in the control
unit, together with a series of specific parameters for
engine operation and diagnosis. This check can also be
performed by traffic controller agents.

INDEX

EOBD SYSTEM

119

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

Large oddment compartments in the dashboard and
doors which make the passenger compartment even
more comfortable can be fond in cars not equipped
with a sound system set-up.
A specific kit can be found in the Lineaccessori Fiat
range for a “Sound system set-up” in the car.
As concerns sound systems consisting of radio with
tapes player or Compact Disc/MP3 CD player (where
provided), see the Supplement annexed to this Owner
Handbook.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

SOUND SYSTEM
(where provided)

120

Downloaded from www.Manualslib.com manuals search engine

SOUND SYSTEM SET-UP (where provided)
The system consists of: sound system power wires,
front and rear speaker power wires, aerial and
respective power wire four front door speakers (2
tweeters and 2 woofers) two rear full-range speakers.
Speakers
❒ n. two tweeters, 40W max power each;
❒ n. two front woofers, 165 mm diameter, 40W max
power each;
❒ n. two rear full-range speakers, 100 mm diameter,
30W max power each;

DASHBOARD
AND
CONTROLS

Sound system installation
Replace the compartment shown in the figure with the plate provided
with the optional “Sound system set-up” in the boot to install the sound
system.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0193m

CORRECT USE
OF THE CAR

SAFETY
DEVICES

To remove the compartment which is clipped into place, insert your
hand in the compartment, press downwards and pull it out towards the
inside of the car. Fit the compartment provided by clipping it into place.
Then locate the electrical connection power wires.

121

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Wiring diagram and
additional branches
A. Fuse box

SAFETY
DEVICES

B. Tweeter on front left-hand
door

CORRECT USE
OF THE CAR

C. Tweeter on front right-hand
door
D. Woofer on front left-hand
door

WARNING
LIGHTS AND
MESSAGES

E. Woofer on front right-hand
door
F. Radio

H. Rear left-hand full-left
speaker
F0I0033m

Wire colour coding:

BN = White/Black

B = White

CN = Orange/Black

N = Black

CV = Orange/Green

R = Red

NZ = Black/Purple

AG = Light blue/Yellow

RN = Red/Black

AR = Light blue/Red

SN = Pink/Black

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

G. Rear left-hand full-range
speaker

122

Downloaded from www.Manualslib.com manuals search engine

I. Aerial
L. Connection on front left-hand
door
M. Connection on front righthand door

❒ dual-purpose connection wires and ten-pin
connector wiring.

❒ dual-purpose speaker (sound system + cellular
phone), on passenger’s door;
❒ dual-purpose connection wires and ten-pin
connector wiring.
The connector is located between the steering column
and the central console.

WARNING

The maximum power applicable to the aerial is 20W.

DASHBOARD
AND
CONTROLS
INDEX

The hands-free telephone you purchase will need to be compatible with your cellular telephone.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

The connector is located between the steering column
and the central console.

SAFETY
DEVICES

❒ dual-purpose aerial (sound system + cellular phone
900/1800 MHz), on the car roof;

❒ dual-purpose aerial (sound system + cellular phone
900/1800 MHz), on the car roof;

CORRECT USE
OF THE CAR

The system set-up, combined with radio with tape
player, CD player, MP3 CD player or Navigator,
consists of:

Cellular phone set-up combined with sound system
set-up, consists of:

WARNING
LIGHTS AND
MESSAGES

CELLULAR PHONE SET-UP
(where provided)

123

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

The wiring diagram is the following:
1 Sound system MUTE function
2 Spare

SAFETY
DEVICES

3 Cellular phone INPUT earth signal (*)
4 Cellular phone INPUT signal (*)

CORRECT USE
OF THE CAR

5 Dual-purpose speaker on passenger’s door (+) (**)
F0I0194m

6 Dual-purpose speaker on passenger’s door (–) (**)
7 Ignition switch power (+15)

WARNING
LIGHTS AND
MESSAGES

8 Spare
9 Battery power (+)
10 Earth

IN AN
EMERGENCY

(*) Sound system with tape player, CD player, MP3 CD player or Navigator.
(**) Sound-system set-up.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

We recommend installing the microphone near the front ceiling light.

Have the cellular telephone and the connections to the system installed by a Fiat Dealership only.
This will ensure the best results and prevent problems which could affect the car safety.

124

Downloaded from www.Manualslib.com manuals search engine

Fiat Auto S.p.A. authorizes the installation of
transceivers provided that installation is carried out at
a specialized shop, workmanlike performed and in
compliance with manufacturer's specifications.
IMPORTANT Installation of devices resulting in
modifications of car characteristics may cause driving

WARNING

Take care when fitting additional spoilers, alloy rims and non-standard wheel caps:
they might reduce ventilation of the brakes, thus their efficiency, during abrupt
and repeated braking, or long downhill slopes. Make sure that nothing (mats, etc.)
gets in the way of the pedals when they are pushed down.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

INSTALLATION OF ELECTRIC/
ELECTRONIC DEVICES
Electric/electronic devices installed after buying the car
or in aftermarket shall bear the and marking:

RADIO TRANSMITTERS AND CELLULAR
TELEPHONES
Radio transceiver equipment (e.g.: e-tacs mobile
phones, HAM radio systems and the like) shall not be
used inside the vehicle unless a separate aerial is
mounted on the roof.
IMPORTANT The use of similar devices inside the
passenger compartment (without separated aerial)
produces radio-frequency electromagnetic fields
which, amplified by the resonance effects inside the
passenger compartment, may cause electrical systems
equipping the vehicle to malfunction. This could
compromise safety in addition to constituting a
potential hazard for the passengers.
In addition, transmission and reception of these devices
may be affected by the shielding effect of the vehicle
body. As concerns EC-approved mobile phones (GSM,
GPRS, UMTS), strictly comply with the instructions for
use provided by the mobile phone’s manufacturer.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

If after buying the car, you decide to install electrical
accessories that require a permanent electric supply
(alarm, satellite antitheft system, etc.) or accessories
that in any case burden the electric supply, contact Fiat
Dealership, whose qualified personnel, besides
suggesting the most suitable devices belonging to
Lineaccessori Fiat, will also evaluate the overall electric
absorption, checking whether the car’s electric system
is able to withstand the load required, or whether it
needs to be integrated with a more powerful battery.

license seizing by traffic agents and also the lapse of
the warranty as concerns defects due to the
abovementioned modification or traceable back to it
directly or indirectly.
Fiat Auto S.p.A. declines all responsibility for damages
caused by the installation of non-genuine accessories
or not recommended by Fiat Auto S.p.A. and installed
not in compliance with the specified requirements.

INDEX

ACCESSORIES PURCHASED BY
THE OWNER

125

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

“DUALDRIVE” ELECTRIC POWER STEERING
SYSTEM (where provided)

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The electric power steering only works when the ignition key is at MAR
and the engine is running. A new electrically controlled power steering
system called “Dualdrive” is fitted on the Fiat Punto that can be
customised by the driver according to the driving conditions.
ACTIVATION/DEACTIVATION (CITY function)
F0I0104m

To connect/disconnect the CITY function, push the button located on
the central tunnel .

WARNING
LIGHTS AND
MESSAGES

Activation of this function is indicated by the word CITY on the
instrument panel (see figures beside).

Additionally, in Sporting versions, this function ensures a more
comfortable drive by gradually dosing the accelerator pedal, suitably
calibrated for acceleration and deceleration.
Versions with digital display

F0I0265m

Versions with multifunction display and
reconfigurable multifunction display

F0I0266m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

When the CITY function is on the steering wheel effort is lighter and
thus parking operations are easier: therefore this function is particularly
useful for driving in city centres.

126

Downloaded from www.Manualslib.com manuals search engine

In the event of electric power steering system failure,
the car can be driven with mechanical steering.

Always switch the engine off, remove the key from the starting device and
actuate the steering lock before carrying out any maintenance operation,
especially when the wheels are raised from the ground. In case this is not
possible (e.g. when the key must be in MAR position or the engine running),
remove the electric power steering main fuse before carrying out any
maintenance operation.

DASHBOARD
AND
CONTROLS
TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING

It is absolutely forbidden to carry out whatever after-market operation involving
steering system or steering column modifications (e.g.: installation of anti-theft
device) that could badly affect performance and safety, cause the lapse of
warranty and also result in non-compliance of the car with homologation
requirements.

INDEX

WARNING

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

IMPORTANT In some circumstances, factors
independent from the electric power steering could
cause the illumination of the warning light g on the
cluster.

IMPORTANT The steering may become slightly stiff
following parking manoeuvres including a great deal of
steering. This is normal and caused by a system to
prevent motor overheating. No servicing is required.
The electrical power steering system will return to
normal operation the next time the car is used.

SAFETY
DEVICES

Any failure is indicated by cluster warning light g
coming on together with the message on the
reconfigurable multifunction display (where required)
(see section “Warning lights and messages”).

We suggest to stop immediately the car, turn off the
engine for about 20 seconds and then re-start the car.
If the warning light g stays on together with the
message on the reconfigurable multifunction display
(where required), contact Fiat Dealership.

CORRECT USE
OF THE CAR

FAILURE WARNING LIGHTS

127

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

PARKING SENSORS (where provided)

ACTIVATION

The sound produced by the acoustic alarm becomes louder when the
distance between the car and the obstacle decreases.
BUZZER WARNINGS
When the reverse gear is engaged a short acoustic signal is automatically
activated.
When an obstacle is detected an intermittent buzzer will sound ad
follows:
❒ when the obstacle is t distance of less that 30 cm from the car, a
continous sound is emitted;

INDEX

IN AN
EMERGENCY

F0I0234m

The sensors are automatically activated when the reverse gear is
engaged.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The parking system detects and informs the driver (through an
intermittent acoustic signal) about the presence of obstacles in the rear
part of the car.

128

Downloaded from www.Manualslib.com manuals search engine

❒ the sound frequency increases as the obstacle gets nearer;

❒ sound is constant if the distance between car and obstacle is unvaried.

Central action radius ........................ 120 cm
Side action radius .............................. 60 cm

The system is preset for deactivating automatically
when the trailer electric cable plug is fitted into the car
tow hook socket.

If several obstacles are detected, the control unit
indicates the nearest one.

Sensors are reactivated when removing the trailer
cable plug.

DASHBOARD
AND
CONTROLS

OPERATION WITH TRAILER

SAFETY
DEVICES

Direction distances

WARNING

Parking manoeuvres however are always under the driver’s responsibility. He/she
shall always check the absence of people (specially children) or animals in the
manoeuvre space. This system is just a help for the driver but he shall never reduce
attention during dangerous manoeuvres even if performed at low speed.

INDEX

For proper operation, the parking sensors set on the bumpers shall be clean from mud, dirt, snow or
ice. When cleaning the sensors, take the utmost care to prevent their damaging; do not use
therefore dry or rough clothes. Sensors shall be washed with clean water and car detergent, if
required. In washing stations, clean sensors quickly keeping the vapour jet/high pressure washing
nozzles at 10 cm at least from the sensors.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

In case of parking sensor failure, the driver is warned
when engaging reverse by high sound warning (for 3
seconds).

CORRECT USE
OF THE CAR

FAILURE WARNINGS

129

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

AT THE FILLING STATION

❒ When parking, take the utmost care to obstacles
set above or under the sensors.

PETROL ENGINES

❒ Objects set close to the car front or rear part,
under certain circumstances are not detected and
could therefore cause damages to the car.
❒ Indications sent by the sensors can be altered by
dirt, snow or ice deposited on the sensors or by
ultrasound systems (e.g.: truck pneumatic brakes or
pneumatic hammers) set nearby the car.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

GENERAL WARNINGS

130

Downloaded from www.Manualslib.com manuals search engine

Use only unleaded petrol.
To prevent errors, the diameter of the fuel tank filler
is too small to introduce a lead petrol pump filler. Use
petrol with a rated octane number (R.O.N.) not lower
than 95.
IMPORTANT An inefficient catalyst leads to harmful
exhaust emissions, thus contributing to air pollution.
IMPORTANT Never use leaded petrol, even in small
amount or in an emergency, as this would damage the
catalyst beyond repair.

If refuelling with diesel fuel not suitable for the current
temperature, mix diesel fuel with TUTELA DIESEL
ART additive in the proportions stated on the can,
putting first the antifreeze in the tank and then the
diesel fuel.
Refuel with local diesel fuel if the car is used/parked in
the mountains or in cold areas for a long period. In
this event you are recommended to keep an amount
of fuel higher than 50% in the tank.

The car must only be filled with diesel fuel for motor vehicles, in compliance with European
Specification EN590. The use of other products or mixtures may irreparably damage the engine
with invalidation of the warranty due to the damage caused. In the event of accidentally filling with
another type of fuel, do not start the engine and empty the tank. If the engine has been run even
for only a very short time, in addition to the tank, it is also necessary to drain out the whole fuel
circuit.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

In order to avoid these problems, different types of
diesel are distributed according to the season: summer
type, winter type arctic type (mountains/cold areas).

WARNING
LIGHTS AND
MESSAGES

To ensure full tank refuelling, carry out two top-up
operations once the delivery gun has turned off twice.
Avoid further top-up operations which could cause
faults in the fuel system.

IN AN
EMERGENCY

If the outside temperature is very low, the diesel
thickens due to the formation of paraffins and could
clog the diesel fuel filter.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

REFUELLING

INDEX

DIESEL ENGINES

131

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

FUEL FILLER CAP
To open the cap, turn it anticlockwise and then remove it.

SAFETY
DEVICES

During refuelling, secure the cap to the anti-loss device on the flap as
shown in the figure.
On certain versions the cap has a keylock: to open it proceed as
described below.

CORRECT USE
OF THE CAR

Opening the cap with keylock (where provided)
F0I0160m

Proceed as follows:
❒ hold the cap still and turn the ignition key anticlockwise;

WARNING
LIGHTS AND
MESSAGES

❒ turn the cap by approximately half a turn anticlockwise and remove it.
The airtight seal of the cap may lead to a slight increase of pressure in the
tank. A hissing sound when the cap is removed is therefore quite normal.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

When refuelling, position the cap on the flap as shown in the figure.

WARNING

Do not put naked flames or lighted cigarettes near the fuel filler hole: danger of
fire. Do not bend too close to the hole either so as not to breathe in harmful
vapours.

132

Downloaded from www.Manualslib.com manuals search engine

❒ three-way catalytic converter;
❒ Lambda sensor;
❒ fuel evaporation system.
In addition, do not let the engine run, even for a test,
with one or more spark plugs disconnected.
The devices for curtailing diesel fuel engine emissions
are the following:
❒ oxidising catalytic converter;

WARNING

During operation of the catalytic converter it releases high temperatures.
Therefore, do not park the car over inflammable material (grass, dry leaves, pine
needles, etc.): fire danger.

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

❒ exhaust gas recirculation system (E.G.R.).

SAFETY
DEVICES

❒ turn the key clockwise and remove it. Close the
flap.

The devices for curtailing petrol engine emissions are
the following:

CORRECT USE
OF THE CAR

❒ insert the cap (with the key) and turn it clockwise
until it clicks once or more;

WARNING
LIGHTS AND
MESSAGES

Proceed as follows:

PROTECTING THE
ENVIRONMENT

IN AN
EMERGENCY

Locking the cap with keylock (where provided)

133

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

SEAT BELTS............................................................................
PRETENSIONERS .................................................................
CARRYING CHILDREN SAFELY .....................................
FRONT AND SIDE AIR BAGS..........................................
SIDE AIR BAGS (Side bag Front Window bag) ..............................................................

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY DEVICES

134

Downloaded from www.Manualslib.com manuals search engine

135
139
143
149
153

DASHBOARD
AND
CONTROLS

SEAT BELTS
USING THE SEAT BELTS

To unfasten the seat belts, press button (C). Guide the seat belt with
your hand while it is rewinding, to prevent it from twisting.
Through the reel, the belt automatically adapts to the body of the
passenger wearing it, allowing freedom of movement.

WARNING

Never press button (C) when travelling.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

When the car is parked on a steep slope the reel mechanism may block;
this is normal. The reel mechanism prevents the webbing coming out
when it is jerked or if the car brakes sharply, in a collision or when
cornering at high speeds.

F0I0155m

WARNING
LIGHTS AND
MESSAGES

At removal, if it jams, let it rewind for a short stretch, then pull it out
again without jerking.

IN AN
EMERGENCY

To fasten the belt, take hold the tongue (A) and insert it into the buckle
(B), until hearing the locking click.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The belt should be worn keeping the chest straight and rested against the
seat back.

135

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

The rear seat is fitted with inertial seat belts with three anchor points
and reel for the side seats and adjustable lap belt with two anchor points
for the centre seat.

In order to avoid incorrect fastening, the tabs of the side seats and the
buckle of the centre lap belt are incompatible.
F0I0017m

IN AN
EMERGENCY

F0I0252m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

136

Downloaded from www.Manualslib.com manuals search engine

Rear seat belts shall be worn as shown in the figure. To fold the seat
back, see paragraph “Extending the boot” in section “Dashboard and
controls”.
IMPORTANT Remember that in the event of a violent collision, back seat
passengers not wearing seat belts also represent a serious danger for the
front seat passengers.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

On certain versions the rear centre seat is fitted with seat belt with three
anchor points and reel.

F0I0018m

DASHBOARD
AND
CONTROLS

FRONT SEAT BELT HEIGHT ADJUSTMENT
Always adjust the height of the seat belt to fit the person wearing it. This
precaution could greatly reduce the risk of injury in case of collision.

Four different adjustments in height are provided.
To adjust, press button (A) and lower or raise the grip (B).

WARNING

Make the height adjustment when the car is stationary.

After adjustment, always check that the slider is anchored in one of the positions
provided. To do this, with the button (A) released, exert a further pressure to allow
the anchor device to catch if release did not take place at one of the preset
positions.

INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0057m

CORRECT USE
OF THE CAR

SAFETY
DEVICES
DEVICES

Correct adjustment is obtained when the belt passes half way between
the end of the shoulder and the neck.

137

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

USING THE REAR CENTRAL SEAT BELT
Seat belt without reel mechanism

To unfasten the seat belt: press button (C).
To adjust the belt: slide the webbing in adjuster (D). Pull length (E) to
tighten the belt and length (F) to loosen it.
F0I0170m

IMPORTANT The belt is adjusted properly when it fits closely across the
hips.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES
DEVICES

To fasten the seat belt: insert the tongue (A) into the buckle (B), until
you hear it click.

Seat belt with three anchor points and reel mechanism
The seat belt has two webbings and a double buckle.

F0I0184m

138

Downloaded from www.Manualslib.com manuals search engine

Slide out more webbing and insert tongue (C) in buckle (D) (grey with
red button).
To unfasten the seat belt: press button (E) and lead the webbing to
buckle (B). Then press button (F) (black).

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

To fasten the seat belt: pull the webbing from your reel gently. Slide the
webbing carefully through the retainer by the side of the head restraint
without twisting it. Then fasten tongue (A) in buckle (B) (grey with a
black button) making the two yellow spot references coincide (one on
the tongue and one on the buckle).

F0I0185m

A small amount of smoke may be produced. This
smoke is in no way toxic and presents no fire hazard.

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

The seat belt locks to indicate that the device has
intervened; the seat belt cannot be drawn back up
even when guiding it manually.

Front seat pretensioners activate only if front seat
belts are properly fitted into buckles.

SAFETY
DEVICES
DEVICES

To increase the efficiency of the front seat belts, the
Fiat Punto is fitted with pretensioners. These devices
“feel”, through a sensor, that a violent crash is in
progress and rewind the seat belts a few centimetres.
In this way they ensure that the seat belt adheres
perfectly to the wearer before the restraining action
begins.

IMPORTANT To obtain the highest degree of
protection from the action of the pretensioning device,
wear the seat belt keeping it firmly close to the chest
and pelvis.

CORRECT USE
OF THE CAR

PRETENSIONERS

139

Downloaded from www.Manualslib.com manuals search engine

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

The pretensioner does not require any maintenance or greasing.
Anything that modifies its original conditions invalidates its efficiency. If
due to unusual natural events (floods, seas storm, etc.) the device has
been affected by water and mud, it must necessarily be replaced.

WARNING

The pretensioner can only be used once. After a collision that has triggered it, have
it replaced at a Fiat Dealership. The validity of the device is written on the plate
located in the glove compartment. Contact Fiat Dealership to have pretensioners
replaced as this date approaches.

Operations which lead to knocks, vibrations or localised heating (over 100°C for a maximum of 6
hours) in the area around the pretensioners may cause damage or trigger them. These devices are
not affected by vibrations caused by irregularities of the road surface or low obstacles such as
kerbs, etc. Contact a Fiat Dealership for any assistance.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0262m

140

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

LOAD LIMITERS

GENERAL INSTRUCTIONS FOR USING
THE SEAT BELTS

WARNING

WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
F0I0020m

For maximum safety, keep the back of your seat upright, lean back into it and
make sure the seat belt fits closely across your chest and hips. Make sure that the
seat belts of the front and rear passengers are fastened at all times! You increase
the risk of serious injury or death in a collision if you travel with the belts
unfastened.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IMPORTANT The belt should not be twisted. The upper part should
pass over the shoulder and cross the chest diagonally. The lower part
should adhere to the pelvis and to the abdomen of the passenger (as
illustrated in the figure). Do not use any objects (pegs, stoppers, etc.) to
keep the belts away from the body.

F0I0019m

INDEX

The driver must comply with (and have the vehicle occupants follow) all
the local legal regulations concerning the use of seat belts.
Always fasten the seat belts before starting.
Seat belts are also to be worn by expectant mothers: the risk of injury in
the case of accident is greatly reduced for them and the unborn child if
they are wearing a seat belt. Of course they must position the lower part
of the belt very low down so that it passes under the abdomen (as
illustrated in the figure).

CORRECT USE
OF THE CAR

SAFETY
DEVICES

To increase passenger’s safety, front and rear (where provided) seat belt
reels contain a load limiter which allows controlled sag in such a way as
to dose the force acting on the shoulders during the belt restraining
action in case of front crash.

141

Downloaded from www.Manualslib.com manuals search engine

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

IMPORTANT Never travel with a child sitting on the passenger’s lap with
a single belt to protect them both. Do not fasten other objects to the
body.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0021m

WARNING

INDEX

WARNING

Under no circumstances should the components of the seat belts and pretensioners
be tampered with or removed. Any operation should be carried out by qualified
and authorised personnel. Always contact a Fiat Dealership.

If the belt has been subjected to heavy stress, for example after an accident, it
should be changed completely together with the anchors, anchor fastening screws
and the pretensioners. In fact, even if the belt has no visible defects, it could have
lost its resilience.

142

Downloaded from www.Manualslib.com manuals search engine

This is even more important for children.

❒ To clean the belts, wash by hand with neutral soap,
rinse and leave to dry in the shade. Never use
strong detergents, bleach or dyes or other chemical
substance that might weaken the fibres;
❒ Prevent the reels from getting wet: their correct
operation is only guaranteed if water does not get
inside;

Compared with adults, their head is proportionally
larger and heavier than the rest of the body, while the
muscles and bone structure are not completely
developed. Therefore, correct restraint systems are
necessary, other then adult seat belts.
The results of research on the best child restraint
systems are contained in the European Standard ECER44. This Standard enforces the use of restraint
systems classified in five groups:
Group 0

0-10 kg in weight

Group 0+

0-13 kg in weight

Group 1

9-18 kg in weight

Group 2

15-25 kg in weight

Group 3

22-36 kg in weight

DASHBOARD
AND
CONTROLS
INDEX

❒ Replace the seat belt when showing significant wear
or cut signs.

According to 2003/20/EC Directive, this prescription
is compulsory for all European Community countries.

SAFETY
DEVICES
DEVICES

❒ After a serious accident, replace the belt being worn
at that time, even if it does not appear damaged.
Always replace the seat belts if pretensioners have
been activated;

CORRECT USE
OF THE CAR

For optimal protection in the event of a crash, all
passengers must be seated and wearing adequate
restraint systems.

WARNING
LIGHTS AND
MESSAGES

❒ Always use the belt with the tape taut and never
twisted; make sure that it is free to run without
impediments;

IN AN
EMERGENCY

Observe the following:

CARRYING CHILDREN
SAFELY

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

HOW TO KEEP THE SEAT BELTS
ALWAYS IN EFFICIENT CONDITIONS

143

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
DEVICES

Over 1.50 m in height from the point of view of
restraint systems, children are considered as adults
and wear the seat belts normally.

All restraint devices must bear the certification data,
together with the control brand, on a solidly fixed
label which must absolutely never be removed.

Lineaccessori Fiat offers seats for each weight group.
These seats are the recommended choice, as they
have been designed and experimented specifically for
Fiat cars.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

As it may be noted, the groups overlap partly and in
fact, in commerce it is possible to find devices that
cover more than one weight group.

WARNING

WARNING

SERIOUS DANGER: Never place cradle child’s seats on the front passenger seat of
cars fitted with passenger’s air bag since the air bag could cause serious injuries, even
mortal. You are advised to carry children always on the rear seat, as this is the most
protected position in the case of a crash. In any case, children’s seats must absolutely
not be fitted on the front seat of cars with passenger’s air bag, which during inflation
could cause serious injury, even mortal, regardless of the seriousness of the crash that
triggered it.

In case of need, on cars provided with front passenger's air bag deactivation, a
child can be carried on the front seat. In this case it is absolutely necessary to
check the F warning light to make sure that deactivation has actually taken
place (see paragraph “Front and side air bags” at item “Front passenger’s air
bag”). The front passenger’s seat shall be adjusted in the most backward position
to prevent any contact between child’s seat and dashboard.

144

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

GROUP 0 and 0+
Babies up to 13 kg must be carried facing backwards on a cradle seat,
which, supporting the head, does not induce stress on the neck in the
event of sharp deceleration.

F0I0022m

GROUP 1

WARNING

WARNING

Figures are indicative for assembly only. The seat should be installed following the
instructions that must accompany it.
Seats exist which are suitable for covering weight groups 0 and 1 with a rear
connection and their own belts to restrain the child. Due to their size, they can be
dangerous if installed incorrectly fastened to the car belts with a cushion. Carefully
follow the instructions for installation provided with the seat.

INDEX

F0I0023m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Starting from 9 kg to 18 kg in weight, children may be carried facing
forwards, with seats fitted with front cushion, through which the car seat
belt restrains both child and seat.

CORRECT USE
OF THE CAR

SAFETY
DEVICES
DEVICES

The cradle is restrained by the car seat belts, as shown in the figure and
in turn it must restrain the child with its own belts.

145

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

GROUP 2

CORRECT USE
OF THE CAR

SAFETY
DEVICES
DEVICES

Starting from 15 kg to 25 kg in weight, children may be restrained
directly by the car belts. The only function of the seat is to position the
child correctly in relation to the belts, so that the diagonal part adheres
to the chest and not to the neck and that the horizontal part clings to the
child’s pelvis and not the abdomen.

F0I0024m

WARNING
LIGHTS AND
MESSAGES

GROUP 3
For children from 22 kg up to 36 kg the size of the child’s chest no longer
requires a support to space the child’s back from the seat back.

IN AN
EMERGENCY

The figure shows proper child seat positioning on the rear seat.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Children taller than 1.50 m can wear seat belts like adults.

F0I0025m

WARNING

The figure is only an example for mounting. Attain to the instructions for fastening
which must be enclosed with the specific child restraint system you are using.

146

Downloaded from www.Manualslib.com manuals search engine

Fiat Punto complies with the new Directive 2000/3/EC regulating child’s seat assembling on the different car seats
according to the following tables:

Rear
side
passenger

Central
rear
passenger
(with reel)

Central
rear
passenger
(lap)

up to 13 kg

U

U

U

(*)

Group 1

9 - 18 kg

U

U

U

(*)

Group 2

15 - 25 kg

U

U

U

(*)

Group 3

22 - 36 kg

U

U

U

(*)

Group 0, 0+

INDEX

Key:
U = suitable for child restraint systems of the “Universal” category, according to European Standard ECE-R44 for the specified “Groups”.
(*) = in correspondence with the central place of the rear seat with lap belts (without reel), no type of seat can be assembled.

CORRECT USE
OF THE CAR

Front
passenger

WARNING
LIGHTS AND
MESSAGES

SEAT

IN AN
EMERGENCY

Range of weight

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Group

SAFETY
DEVICES

Front and rear seat (3 and 5-door versions)

DASHBOARD
AND
CONTROLS

PASSENGER SEAT COMPLIANCE WITH REGULATIONS ON CHILD’S SEAT USE

147

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

❒ Only one child is to be strapped to each retaining
system.

❒ The recommended position for installing child’s seat
is on the rear seat, as it is the most protected in the
case of a crash.

❒ Always check the seat belts do not fit around the
child’s throat.

❒ If the passenger’s air bag is deactivated always check
the warning light F on the cluster to make sure
that it has actually been deactivated.
❒ Attain to the instructions for fastening the specific
child restraint system which you are using. These
instructions must be provided by the manufacturer.
Keep the child restraint system installation
instructions with the car documents and this
Handbook. Never use a child restraint system
without installation instructions.

❒ While travelling, do not let the child sit incorrectly
or release the belts.
❒ Passengers should never carry children on their
laps. No-one, however strong they are, can hold a
child in the event of a crash.
❒ In case of an accident, replace the seat with a new
one.

❒ Always check the seat belt is well fastened by pulling
the webbing.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Below is a summary of the rules of safety to be
followed for carrying children:

WARNING

In cars fitted with passenger air bag never place child’s restraint systems on
the front seat since children shall never be seated on the front passenger
seat.

148

Downloaded from www.Manualslib.com manuals search engine

In case of crash, a person not wearing the seat belt
moves forward and may come into contact with the
cushion while it is still inflating. Under this
circumstance the protection offered by the air bag is
reduced.

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Front air bags are designed to protect car’s occupants
in front crashes and therefore non-activation in other
types of collisions (side collisions, rear shunts, rollovers, etc.) is not a system malfunction.

The front air bag (driver and passenger) is not a
replacement of but complementary to the use of belts,
which should always be worn, as specified by law in
Europe and most non-European countries.

SAFETY
DEVICES

The front air bag (driver and passenger) has been
designed to protect the occupants in the event of
head-on crashes of medium-high severity, by placing
the cushion between the occupant and the steering
wheel or dashboard.

CORRECT USE
OF THE CAR

The car is fitted with driver’s air bag. As optional it can
be fitted with passenger’s air bag, side bags and
window bag.

In case of front crash, an electronic control unit, when
required, triggers the inflation of the cushion according
to the severity of the collision. The cushion
immediately inflates, placing itself as a protection
between the body of the front occupants and the
structure that could cause injuries. Immediately after,
the cushion deflates.

WARNING
LIGHTS AND
MESSAGES

FRONT AND SIDE AIR BAGS

149

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

❒ in collisions against highly deformable objects not
affecting the vehicle front surface (e.g. bumper
collision against guard rail, etc.);

as it offers no additional protection compared with the
seat belts, consequently, it would be pointless.
Therefore, failure to come into action in the above
circumstances does not mean that the system is not
working properly.

❒ car wedging under other vehicles or protective
barriers (for example under a truck or guard rail);

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Front air bag can be activated in the following
situations:

WARNING

Please don’t apply stickers or other objects to the steering wheel, to the air-bag
cover on the passenger's side or on the side roof lining to the upholstery on the
roof side. Don’t place objects on the dashboard passenger’s side (such as mobile
phones) because they could tamper with the correct opening of the passenger’s
air-bag and than cause serious injuries to the vehicle occupants.

150

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

DRIVER’S FRONT AIR BAG
It consists of an instant-inflating cushion contained in a special recess in
the centre of the steering wheel.

It consists of an instant-inflating cushion contained in a special recess in
the dashboard; its volume is bigger than the driver’s one.
The driver’s and passenger’s front Air bags have been designed and
calibrated to improve the protection of a person wearing seat belts.

F0I0237m

WARNING

WARNING

SERIOUS DANGER: The car is fitted with an air bag on the passenger’s side. Never
place cradle child’s seats on the front passenger’s seat of cars fitted with passenger’s
air bag since the air bag activation could cause serious injuries, even mortal.
On cars provided with front passenger's air bag, the air bag shall be deactivated
when placing a child' seat on the front passenger's seat. The front passenger seat
shall be adjusted in the most backward position to prevent any contact between
child’ seat and dashboard. Even if not compulsory by law, you are recommended to
reactivate the air bag immediately as soon as child transport is no longer necessary.

INDEX

F0I0105m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

At their maximum inflation, their volume fills most of the space between
the dashboard and the passenger.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

PASSENGER’S FRONT AIR BAG (where provided)

151

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

MANUALLY DEACTIVATING PASSENGER’S FRONT
AIR BAG (where required)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Should it be absolutely necessary to carry a child on the front seat, the
passenger’s air bag on the car can be deactivated.

152

Downloaded from www.Manualslib.com manuals search engine

Deactivation/reactivation takes place with ignition key at STOP and
operating it in the special key switch on the right-hand side of the
dashboard. You can reach the switch only if the door is opened.
F0I0064m

When the door is open, the key can be inserted and removed in both
positions.
IMPORTANT Operate the switch only when the engine is not running
and the ignition key is removed.
The key-operated switch has two positions:

❒ Passenger’s front air bag activated (ON position P): warning light
F on instrument cluster off; it is absolutely prohibited to carry a
child on the front seat.

❒ Passenger’s front air bag deactivated (OFF position F): warning light
F on instrument cluster on; it is possible to carry a child protected
by special restraint system on the front seat.
The warning light F on the cluster stays on permanently until the
passenger’s air bag is reactivated.
Deactivation of the passenger’s front air bag does not inhibit operation of
the side air bag.

DASHBOARD
AND
CONTROLS

SIDE AIR BAGS (Side bag Front Window bag) (where provided)
They are composed by two types of instant inflation and are housed in
the back rest of the front seats. The task of the side air bags is to
increase protection of the occupants’ chest in the event of a side crash of
medium-high severity.
F0I0106m

FRONT WINDOW BAG

WARNING
LIGHTS AND
MESSAGES

They are “curtain” cushions located behind the side coverings of the roof
and covered by proper finishings such to allow the cushion unfolding
downwards; this solution, studied for the head protection, allows offering
the best protection to the front occupants in the event of side crash.

INDEX

F0I0107m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

In minor side crashes (for which the restraining action of the seat belts is
sufficient), the air bags are not deployed.
Also in this case it is of vital importance to wear the seat belts since in
case of side crash they guarantee proper positioning of the occupant and
prevent the occupants to be pitched out of the car in case of violent
crashes. Therefore the side bags are not a replacement of but
complementary to the belts, which you are recommended to always
wear, as specified by law in Europe and most non-European countries.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

SIDE BAG

153

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

IMPORTANT The front air bags and/or side bags may
be deployed if the car is subject to heavy knocks or
accidents involving the underbody area, such as for
example violent shocks, against steps, kerbs or low
obstacles, falling of the car in big holes or sags in the
road.

IMPORTANT When the airbag inflates it emits a small
amount of dusts. These dusts are harmless and is not
the beginning of a fire; then the unfold cushion surface
and the car interiors can be covered by a dusty
remains: this dust can irritate skin and eyes. In case of
contact, wash yourself using neutral soap and water.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING

Never rest head, arms and elbows on the door, on the windows and in the front
window bag area to prevent possible injuries during the inflation phase.

INDEX

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

IMPORTANT In the event of side crash, you can
obtain the best protection by the system keeping a
correct position on the seat, thus allowing correct
front window bag unfolding.

WARNING

Never put head, arms and elbows out of window.

154

Downloaded from www.Manualslib.com manuals search engine

IMPORTANT The triggering of pretensioners, front
air bags and front and rear side bags is decided in a
differentiated manner by the electronic control unit,
depending on the type of crash.
The failure to deploy one or more of them does not
mean that the system is not working properly.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

All control, repair and replacement operations
concerning the air bags must only be carried out c/o
Fiat Dealership.

DASHBOARD
AND
CONTROLS

IMPORTANT Should an accident occur in which any
of the safety devices is activated, take the car to a Fiat
Dealership to have the devices activated replaced and
to have the system checked.

SAFETY
DEVICES

If you are having the car scrapped, have the airbag
system deactivated at a Fiat Dealership first. If the car
changes ownership, the new owner must be informed
of the method of use of air bags and the above
warnings and also be given this “Owner handbook”.

CORRECT USE
OF THE CAR

The airbag system has a validity of 14 years for the
pyrotechnic charge and 10 years for the coil contact
(see the plate located in the glove compartment).
Contact Fiat Dealership for replacement as these dates
approach.

155

Downloaded from www.Manualslib.com manuals search engine

WARNING

Do not cover the back rest of front seats with trims or covers there are not set for
the use of side bags.

WARNING

Never travel with objects on your lap, in front of your chest or with a pipe, pencil,
etc. between your lips. Injury may result in the event of the air bag being triggered.

WARNING
INDEX

If the ¬ warning light does not turn on when turning the ignition key to MAR or if
it stays on when travelling, this could indicate a failure in safety retaining systems;
under this condition air bags or pretensioners could not trigger in the event of
collision or, in a restricted number of cases, they could trigger accidentally. Stop
the car and contact Fiat Dealership to have the system checked immediately.

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

GENERAL WARNINGS

Always keep your hands on the steering wheel rim when driving, so that if the air
bag is triggered, it can inflate without meeting any obstacles which could cause
serious harm to you. Do not drive with the body bent forwards, keep the seat back
rest in the erect position and lean your back well against it.

156

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

If the car has been stolen or an attempt to steal it has been made, if it has been
subjected to vandals or floods, have the air bag system checked by Fiat
Dealership.

WARNING
LIGHTS AND
MESSAGES

Remember that with the key engaged and in the MAR position, even with the
engine not running, the air bags may be triggered on a stationary vehicle if it is
bumped by another moving car. Therefore, never seat children on the front seat
even when the vehicle is stationary. On the other hand, remember that with the
ignition key at STOP no safety device (air bags or pretensioners) will be
triggered in the event of an impact; in these cases, failure to come into action
of the air bags cannot be considered as a sign that the system is not working
properly.

WARNING

When the ignition key is turned to the MAR position, the warning light F (with
passenger’s front air bag deactivation (where required) switch in the ON position)
turns on and flashes for few seconds to remind that passenger’s air bag will be
deployed in a crash, after which it should go off.

Do not wash the seat back rest with pressurised water or steam (by hand or at
automatic seat washing stations).

INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING

CORRECT USE
OF THE CAR

SAFETY
DEVICES

WARNING

157

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

The front air bag is triggered for shocks greater in magnitude than the
pretensioners. For impacts between these two thresholds, it is therefore normal
that only the pretensioners are triggered.

WARNING

Do not hook rigid objects to the coat hooks and to the support handles.

WARNING

The air bag does not substitute the seat belts, but only increases their effectiveness. Moreover,
since the front air bags do not come into operation in the event of front impact at low speed,
side collisions, bumps from behind or overturning, in these circumstances the occupants would
only be protected by the seat belts which must therefore always be fastened.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

WARNING

158

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

160
163
164
165
168
171
172
173

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

ENGINE STARTING ............................................................
PARKING................................................................................
USING THE MANUAL GEARBOX..................................
CONTAINING RUNNING COSTS ................................
TOWING TRAILERS ...........................................................
SNOW TYRES.......................................................................
SNOW CHAINS ...................................................................
CAR INACTIVITY ................................................................

CORRECT USE
OF THE CAR

CORRECT USE OF THE CAR

159

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

ENGINE STARTING

If the engine does not start at the first attempt, return
the ignition key to STOP before repeating starting.

The car is fitted with an electronic engine lock device.
If the engine fails to start, see paragraph “Fiat Code
system” in section “Dashboard and controls”.

If, when the ignition key is on MAR, warning light Y
remains lit together with warning light U, turn the
key to STOP and then back to MAR; if the warning
light remains on, try with the other keys provided with
the car.

STARTING PROCEDURE FOR PETROL
VERSIONS
Proceed as follows:
❒ Ensure that the handbrake is up;
❒ Put the gear lever into neutral;
❒ Press the clutch pedal down to the floor without
touching the accelerator;

If you are still unable to start the engine, perform the
emergency start-up procedure (see “Emergency startup” in section “In an emergency”) and contact Fiat
Dealership.
IMPORTANT Never leave the ignition key at MAR
when the engine is off.

❒ Turn the ignition key to AVV and let it go the
moment the engine starts.

We recommend that during the initial period you do not drive to full vehicle performance (e.g.:
excessive acceleration, long journeys at top speed, sharp braking, etc).

When the engine is switched off never leave the ignition key in the MAR position to prevent
pointless current absorption from draining the battery.

WARNING

Running the engine in confined areas is extremely dangerous. The engine consumes
oxygen and produces carbon monoxide which is a highly toxic and lethal gas.

160

Downloaded from www.Manualslib.com manuals search engine

❒ Turn the ignition key to MAR. The warning lights
m and Y will light up on the instrument panel;

❒ Wait for the warning lights Y and m to go out.
The hotter the engine is, the quicker this will
happen;

If you still cannot start the engine, contact Fiat
Dealership.
IMPORTANT Never leave the ignition key at MAR
when the engine is off.

❒ Press the clutch pedal down to the floor without
touching the accelerator;
❒ Turn the ignition key to AVV as soon as warning
light m goes out. If you wait too long you will lose
the benefit of the work done by the glow plugs.
Release the key as soon as the engine starts.

The warning light m will flash for 60 seconds at start-up or during prolonged cranking to signal
a fault in the glow plug heating system. You can use the car as usual if the engine starts but you
should contact a Fiat Dealership as soon as possible.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

❒ Put the gear lever into neutral;

CORRECT USE
OF THE CAR

❒ Ensure that the handbrake is up;

WARNING
LIGHTS AND
MESSAGES

If, when the ignition key is on MAR, warning light Y
remains lit, turn the key to STOP and then back to
MAR; if the warning light remains on, try with the
other keys provided with the car.

IN AN
EMERGENCY

Proceed as follows:

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

If the engine does not start at the first attempt, return
the ignition key to STOP before repeating starting.

INDEX

STARTING PROCEDURE FOR DIESEL
VERSIONS

161

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

HOW TO WARM UP THE ENGINE
AFTER IT HAS JUST STARTED
(petrol and diesel versions)
❒ Drive off slowly, letting the engine turn at medium
revs. Do not accelerate abruptly;
❒ Do not drive at full performance for the initial
kilometres. Wait until the coolant temperature
gauge starts moving.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Proceed as follows:

EMERGENCY START-UP
If the instrument panel warning light Y stays on with
fixed light, the emergency start-up can be performed
by using the CODE card code (see section “In an
emergency”).
STOPPING THE ENGINE
Turn the ignition to STOP while the engine is idling.
IMPORTANT After a taxing drive, you should allow
the engine to “catch its breath” before turning it off by
letting it idle to allow the temperature in the engine
compartment to fall.

Never bump start the engine by pushing, towing or coasting downhill. This could cause fuel to flow
into the catalytic exhaust system and damage it beyond repair.

A quick burst on the accelerator before turning off the engine serves absolutely no practical
purpose, it wastes fuel and is damaging especially to turbocharged engines.

WARNING

Remember that the servobrake and power steering are not operational until the
engine has been started, therefore much effort than usual is required on the brake
pedal and steering wheel.

162

Downloaded from www.Manualslib.com manuals search engine

❒ Stop the engine and engage the handbrake;
❒ Engage a gear (first if the car is faced uphill or
reverse if it is faced downhill) and leave the wheels
steered.

IMPORTANT If this is not the case, contact Fiat
Dealership to have the handbrake adjusted.
When the handbrake lever is pulled up and the ignition
key is at MAR the panel warning light x will come on.

WARNING

Never leave children unattended in the car. Always remove the ignition key when
leaving the car and take it out with you.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Block the wheels with a wedge or a stone if the car is
parked on a steep slope. Do not leave the ignition key
at MAR to prevent draining the battery. Always
remove the key when you leave the car.

Pull the handbrake lever upwards until the car cannot
be moved. Four or five clicks are generally enough
when the car is on level ground while nine or ten may
be required if the car is on a steep slope or laden.

DASHBOARD
AND
CONTROLS

The handbrake lever is located between the two front
seats.

SAFETY
DEVICES

Proceed as follows:

CORRECT USE
OF THE CAR

HANDBRAKE

WARNING
LIGHTS AND
MESSAGES

PARKING

163

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

To release the handbrake:
❒ Slightly lift the handbrake and press release button (A);

Press the brake pedal when carrying out this operation to prevent the
car from moving accidentally.
F0I0108m

To engage 6th gear press the lever to the right to prevent engaging 4th
gear by mistake. A similar action is required to shift down from 6th to
5th.

IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

164

Downloaded from www.Manualslib.com manuals search engine

USING THE MANUAL GEARBOX
To engage the gears, press the clutch pedal fully and shift the gear lever
into one of the required positions (the diagram is shown on the knob).

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

❒ Keep button (A) pressed in and lower the lever. Warning light x will
go out.

IMPORTANT The car can only be put into reverse gear when it has
stopped moving completely. With the engine running, before engaging the
reverse, wait at least 2 seconds with the clutch pedal fully down to
prevent damage and grating of the gears.
F0I0109m

❒ for 1.28V and 1.216V versions, lift the sliding ring (A)
under the knob and shift the lever to the right and
back;

Here are some suggestions which may help you to
keep the running costs of your car down and lower
the amount of toxic emissions released into the
atmosphere.
GENERAL CONSIDERATIONS
Car maintenance

To change gears properly you must push the clutch pedal fully down. It is therefore
essential that there is nothing under the pedals: make sure mats are lying flat and
do not get in the way of the pedals.

Do not drive with your hand resting on the gear lever as the force exerted, even if slight, could lead
over time to premature wear on the gearbox internal components.

INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Have checks and adjustments carried out in
accordance with the “Service schedule”.

CORRECT USE
OF THE CAR

❒ for 1.816V versions, just shift the lever to the right
and back.

DASHBOARD
AND
CONTROLS

CONTAINING RUNNING COSTS

SAFETY
DEVICES

To engage reverse (R) from neutral proceed as
follows:

165

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

Climate control

Check the pressure of the tyres routinely at an
interval of no more than 4 weeks: if the pressure is
too low, consumption levels increase as resistance to
rolling is higher.

The air conditioner is an additional load which greatly
affects the engine leading to higher consumption (on
average up to +20%). When the temperature outside
the vehicle permits it, use the air vents where possible.

Unnecessary loads

Spoilers

Do not travel with too much luggage stowed in the
boot. The weight of the car (especially when driving in
town) and its trim greatly affects consumption and
stability.

The use of non-certified aerodynamic items may
adversely affect air drag and consumption levels.

Roof rack/ski rack

Starting

Remove the roof rack or the ski rack from the roof as
soon as they are no longer used. These accessories
lower air penetration and adversely affect
consumption levels. When needing to carry
particularly voluminous objects, preferably use a
trailer.

Do not warm the engine with the car at a standstill or
at idle or high speed: under these conditions the
engine warms up much more slowly, increasing
electrical consumption and emissions.

Electric devices
Use electric devices only for the amount of time
needed. Rear heated window, additional headlights,
windscreen wipers and heater fan need a considerable
amount of energy, therefore increasing the
requirement of current increases fuel consumption (up
to +25% in the urban cycle).

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Tyres

166

Downloaded from www.Manualslib.com manuals search engine

DRIVING STYLE

It is therefore advisable to move off immediately,
slowly, avoiding high speeds. This way the engine will
warm faster.
Unnecessary actions
Avoid accelerating when waiting at traffic lights or
before switching off the engine. This and also double
declutching is absolutely pointless on modern cars and
also increase consumption and pollution.

Fuel consumption considerably increases with speed.
Avoid superfluous braking and accelerating, which cost
in terms of both fuel and emissions.
Acceleration
Accelerating violently increasing the revs will greatly
affect consumption and emissions: acceleration should
be gradual and should not exceed the maximum
torque.

Traffic situations and road conditions
Rather high consumption levels are tied to situations
with heavy traffic, for example in queues with frequent
use of the lower gears or in cities with many traffic
lights. Also winding mountain roads and rough road
surfaces adversely affect consumption.
Traffic hold-ups

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

During prolonged hold-ups (e.g.: level crossings) the
engine should be switched off.

SAFETY
DEVICES

Short journeys and frequent cold starts do not allow
the engine to reach optimum operating temperature.
This results in a significant increase in consumption
levels (from +15 to +30% on the urban cycle) and
emission of harmful substances.

CORRECT USE
OF THE CAR

Top speed

Cold starting

WARNING
LIGHTS AND
MESSAGES

As soon as the conditions of the traffic and road allow,
use a higher gear. Using a low gear to obtain brilliant
performance increases consumption. In the same way
improper use of a high gear increases consumption,
emissions an engine wear.

CONDITIONS OF USE

IN AN
EMERGENCY

Gear selection

167

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

Engage a low gear when driving downhill, rather than
constantly using the brake.

IMPORTANT NOTES

The weight the trailer exerts on the car tow hook
reduces by the same amount the actual vehicle loading
capacity. To make sure the maximum towable weight
is not exceeded (given in the log book) account should
be taken of the fully laden trailer, including accessories
and personal belongings.

For towing caravans or trailers the car must be fitted
with a certified tow hook and an adequate electric
system. Installation should be carried out by
specialised personnel who release a special document
for circulation on the road.
Install any specific and/or additional rear-view mirrors
as specified by law.

Do not exceed the speed limits of the country you are
driving in. In any case do not exceed 100 km/h.

Remember that when towing a trailer, steep hills are
harder to climb, the braking spaces increase and
overtaking takes longer depending on the overall
weight.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

TOWING TRAILERS

WARNING

The ABS system with which the car may be fitted does not control the trailer braking
system. Great care should therefore be taken when driving on slippery road surfaces.

WARNING

Under no circumstances should the vehicle brake system be altered to control the
trailer brake. The trailer braking system must be fully independent of the vehicle’s
hydraulic system.

168

Downloaded from www.Manualslib.com manuals search engine

For any version the towing device used must match
the towable weight of the vehicle on which it is to be
installed.

In addition to the electrical branches, the car’s electric
system can only be connected to the supply cable for
an electric brake and to the cable for an internal light,
though not above 15W.
For connections use a preset control unit with battery
cable no less than 2,5 mm2.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

For the electric connection a unified connector should
be used which is generally placed on a special bracket
normally fastened to the towing device, and a special
ECU for external trailer light control shall be installed
on the car.

IMPORTANT Electric brake or other device shall be
used with running engine.

CORRECT USE
OF THE CAR

The towing device must meet current regulations with
reference to 94/20/EC Directive and subsequent
amendments.

An electric brake should be supplied directly by the
battery through a cable with a cross section of no less
than 2,5 mm2.

WARNING
LIGHTS AND
MESSAGES

The towing device should be fastened to the body by
specialised personnel according to any additional
and/or integrative information supplied by the
Manufacturer of the device.

For the electrical connection, a 7 or 13 pole 12ESP
coupling must be used (CUNA/UNI and ISO/DIN
standards). Follow the instructions provided by the car
manufacturer and/or the tow hitch manufacturer.

IN AN
EMERGENCY

INSTALLING THE TOW HOOK

169

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Assembly diagram

725

Asse ruote posteriori

280

70

155

90

CORRECT USE
OF THE CAR

30

a pieno carico

n. 2 M12

112

FullVeicolo
load

385 +- 35

12

Rear axle

SAFETY
DEVICES

The tow hook structure must be fastened in the points
shown by the symbol Ø using a total of 4 M8 screws 2
M10 screws and 2 M12 screws.

>65
Fori esistenti

Existing
holes
Fori esistenti

A

481

440

376

WARNING
LIGHTS AND
MESSAGES

n. 2 M8

M10

Standard
tow ball

IMPORTANT It is compulsory to fasten a label (plainly
visible) of suitable size and material with the following
wording:

481

440

n. 2 M8

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The hook should be fastened to the body avoiding any
type of drilling and trimming of the rear bumpers that
remains visible when the hook is removed.

MAX LOAD ON BALL 60 kg

376

IN AN
EMERGENCY

Sfera a norme

In the fastening points of the rear external covering,
the dampening pad fastening plates must be replaced
with right plate A and left plate B (code 50901257 and
50901258) that shall compulsorily be mounted in the
external side of the rear covering, as shown in the
figure.

Existing
holes
Fori esistenti

B

M10

30
70

155

90

112

After fitting, screw holes
shall be sealed to
prevent an exhaust gas inlet.

INDEX

WARNING

B

A

170

Downloaded from www.Manualslib.com manuals search engine

F0I0037m

The winter features of these tyres are reduced
considerably when the tread depth is below 4 mm. In
this case, they should be replaced.

WARNING

Remember that it is inappropriate to change the
direction of rotation of tyres.

The max speed for snow tyres with “Q” marking is 160 km/h; 190 km/h for tyres
with “T” marking and 210 km/h for tyres with “H” marking. The Road Traffic Code
speed limits must however be always strictly observed.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

All four tyres should be the same (brand and track) to
ensure greater safety when driving and braking and
better driveability.

WARNING
LIGHTS AND
MESSAGES

For the type of tyre to be used, inflation pressures and
the specifications of snow tyres, follow the
instructions given in paragraph “Wheels” in section
“Technical specifications”.

IMPORTANT When snow tyres are used with a max
speed index below the one that can be reached by the
car (increased by 5%), place a notice in the passenger
compartment, plainly in the driver’s view which states
the max permissible speed of the snow tyres (as per
EC Directive).

IN AN
EMERGENCY

Fiat Dealership will be happy to provide advice
concerning the most suitable type of tyre for the
customer’s requirements.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Use snow tyres of the same size as the normal tyres
provided with the car.

Due to the snow tyre features, under normal
conditions of use or on long motorway journeys, the
performance of these tyres is lower than that of
normal tyres. It is therefore necessary to limit their
use to the purposes for which they are certified.

INDEX

SNOW TYRES

171

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

Use of snow chains should be in compliance with local
regulations.
Snow chains should only be applied to the driving
wheels (front wheels). We recommend using
Lineaccessori Fiat snow chains.
Check the tension of the chains after driving some ten
metres.

IMPORTANT Snow chains cannot be fitted to the
space-saver spare wheel. So, if a front (drive) wheel is
punctured and chains are needed, a rear wheel should
be fitted to the front of the vehicle and the spare
wheel should be fitted to the rear. This way with two
normal drive wheels, snow chains can be fitted to
them to solve an emergency.
IMPORTANT Use only reduced clearance snow chains
with maximum projection off wheel equal to 12 mm.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SNOW CHAINS

Keep your speed down when snow chains are fitted. Do not exceed 50 km/h. Avoid potholes,
steps and pavements and avoid also to drive for long distances on roads not covered with
snow to prevent damaging the car and the roadbed.

172

Downloaded from www.Manualslib.com manuals search engine

❒ check that the handbrake is not engaged;
❒ disconnect battery terminals (first disconnect the
negative terminal) and check the battery charge.
This check is to be repeated every three months.
Recharge if the optical indicator shows a dark
colour without the central green area;
❒ clean and protect the painted parts using protective
wax;

❒ if you don’t disconnect the battery from the electric
system, check its charge every month and recharge
it if the optical indicator shows a dark colour
without the central green area;
❒ do not drain the engine cooling system.

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

❒ clean and protect the shiny metal parts using special
compounds readily available;

❒ inflate tyres to +0.5 bar above the normal specified
pressure and check it at intervals;

SAFETY
DEVICES

❒ engage a gear;

❒ cover the car with a cloth or perforated plastic
sheet. Do not use sheets of non-perforated plastic
as they do not allow moisture on the car body to
evaporate;

CORRECT USE
OF THE CAR

❒ park the car in covered, dry and if possible wellventilated premises;

❒ slightly open the windows;

WARNING
LIGHTS AND
MESSAGES

If the car is to be left inactive for longer than a month,
the following precautions should be noted:

❒ sprinkle talcum powder on the rubber windscreen
and rear window wiper blades and lift them off the
glass;

IN AN
EMERGENCY

CAR INACTIVITY

173

Downloaded from www.Manualslib.com manuals search engine

GLOW PLUGS ......................................................................

190

LOW BRAKE FLUID LEVEL...............................................

176

WATER IN DIESEL FUEL FILTER.....................................

191

HANDBRAKE ON ...............................................................

176

INEFFICIENT ABS SYSTEM................................................

192

AIR BAG FAILURE................................................................

177

FRONT PASSENGER AIR BAG DEACTIVATED .........

178

CAR PROTECTION SYSTEM FAILURE FIAT CODE............................................................................

193

LOW BATTERY CHARGE.................................................

179

EXTERNAL LIGHT FAILURE.............................................

194

LOW ENGINE OIL PRESSURE .........................................

179

REAR FOGLIGHTS...............................................................

196

“DUALDRIVE“ ELECTRIC POWER
STEERING ENGAGEMENT ..............................................

180

FRONT FOG LIGHTS .........................................................

196

“DUALDRIVE” ELECTRIC POWER
STEERING FAILURE.............................................................

LEFT-HAND DIRECTION INDICATOR .......................

196

180

RIGHT-HAND DIRECTION INDICATOR ...................

196

IN AN
EMERGENCY

DASHBOARD
AND
CONTROLS

175

HIGH TEMPERATURE ENGINE COOLANT FLUID..

181

SIDELIGHTS AND LOW BEAMS.....................................

197

INCOMPLETE DOOR LOCKING ...................................

183

FOLLOW ME HOME...........................................................

197

SPEED LIMIT EXCEEDED...................................................

184

FUEL RESERVE.......................................................................

184

MAIN BEAMS ........................................................................

197

LIMITED RANGE ..................................................................

185

CRUISE CONTROL.............................................................

197

EOBD - ENGINE CONTROL SYSTEM FAILURE .......

186

GENERAL FAILURE INDICATION ................................

198

ESP SYSTEM FAILURE .........................................................

188

DIESEL FUEL FILTER SENSOR FAILURE........................

198

ASR - WHEEL ANTISKID SYSTEM..................................

189

GLOW PLUG WARMING FAILURE...............................

189

POSSIBLE PRESENCE OF ICE
ON THE ROAD....................................................................

198

INDEX

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

GENERAL WARNINGS......................................................

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WA R N I N G L I G H T S A N D M E S S A G E S

174

Downloaded from www.Manualslib.com manuals search engine

IMPORTANT Failure indications displayed on the
reconfigurable multifunction display are divided into
two categories: very serious failures and
serious/minor failures.

At the end of the display cycle (which lasts approx. 20
seconds), or if button Q is pressed, the screen active
before the failure will be resumed and the warning
light will stay on until eliminating the failure cause.
See the attached Supplement for messages relevant to
versions with Speedgear or Dualogic gearbox.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

Should failure disappear during the 20 seconds
displaying, message and warning light will stay on for
about 2 seconds. Eliminating the failure, the warning
light and the displayed message will go off.

INDEX

The message and the warning indication corresponding
to very serious failures are displayed alternately for
few seconds. This “cycle” is repeated indefinitely and it
stops any previous indication on the display. It is
displayed every time the ignition key is turned to MAR,
until the cause of malfunctioning is removed.

The message and the warning indication corresponding
to serious/minor failures are displayed alternately for
few seconds. This “cycle” is repeated for about 20
seconds and then goes off, but it comes on again every
time the ignition key is turned to MAR.

IN AN
EMERGENCY

Failure indications shown (only for some versions)
on the reconfigurable multifunction display
together with buzzer sounding (adjustable) and
warning light (if any) coming on on the cluster, are
accompanied by possibles specific warning messages
(e.g.: “Switch off engine”, etc...). These indications are
concise and cautionary and are aimed to suggest
the prompt action the driver must adopt when a car
malfunctioning appears. These indications, however,
shall not be considered as exhaustive and/or as an
alternative to the specifications contained in this
“Owner handbook”, which shall always be read
through carefully and thoroughly. In case of failure
indication always refer to the specifications
contained in this section.

Should failure disappear, message and warning light will
however stay on for about 2 seconds. Eliminating the
failure, the warning light and the displayed message will
go off. It is possible to stop this “cycle” by pressing
button Q, in this case the screen active before the
failure will be resumed and the warning light will stay
on until eliminating the failure cause.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

GENERAL WARNINGS

175

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

LOW BRAKE FLUID LEVEL (red)

x

Turning the ignition key to MAR the warning light
on the dial turns on, but it should go off after few
seconds.
The warning light turns on (together with the
message on the display) when the level of the brake
fluid in the reservoir falls below the minimum level,
due to possible leak in the circuit.

HANDBRAKE ON (red)

x

Turning the ignition key to MAR the warning light
on the dial turns on, but it should go off after few
seconds. The warning light turns on when the
handbrake is on.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

IMPORTANT If the warning light x turns on when
travelling, check that the handbrake is not engaged.
With handbrake engaged, if 4 km/h speed is
exceeded the buzzer will sound (only for versions
with reconfigurable multifunction display).

WARNING

If the warning light x turns on when travelling (on certain versions together with the
message on the display) stop the car immediately and contact Fiat Dealership.

176

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

¬

WARNING

If the ¬ warning light does not turn on when turning the ignition key to MAR
or if it stays on when travelling, this could indicate a failure in safety retaining
systems; under this condition air bags or pretensioners could not trigger in the
event of collision or, in a restricted number of cases, they could trigger
accidentally. Stop the car and contact Fiat Dealership to have the system
checked immediately.

The failure of the ¬ warning light (warning light off) is also indicated by the flashing for
more than the normal seconds of the passenger’s front air bag deactivated warning light F.

INDEX

WARNING

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Turning the ignition key to MAR the warning light
on the dial turns on, but it should go off after few
seconds. The warning light stays on glowing steadily
(on certain versions together with the message on
the display) if there is a failure in the air bag system.

SAFETY
DEVICES

AIR BAG FAILURE (red)

Warning light
on dial

CORRECT USE
OF THE CAR

Message on reconfigurable
multifunction display

177

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

FRONT PASSENGER AIR BAG
DEACTIVATED (amber)

F

Warning light comes on on the dial when front
passenger air bag is deactivated.
With front passenger air bag on, turning the ignition
key to MAR, warning light F comes on flashing on
the cluster for about 4 seconds, then it flashes for
other 4 seconds and then it shall go off.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

INDEX

WARNING

Warning light F indicates also warning light ¬ failure. This is indicated by
intermittent flashing, over 4 seconds, of warning light F. In this event, warning
light ¬ could be not up to indicate restraint system failures, if any. Stop the car
and contact Fiat Dealership to have the system checked.

178

Downloaded from www.Manualslib.com manuals search engine

If it stays on together with the message shown on
the display, contact immediately Fiat Dealership.

LOW ENGINE OIL PRESSURE (red)

v

If the v warning light turns on when the car is travelling (on certain versions together with the
message on the display), stop the engine immediately and contact a Fiat Dealership.

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Turning the key to MAR the warning light on the
dial turns on, but it should go off as soon as the
engine is started.

SAFETY
DEVICES

w

CORRECT USE
OF THE CAR

Turning the key to MAR the warning light on the
dial turns on, but it should go out as soon as the
engine is started (with the engine running at idle
speed a brief delay in going out is allowed).

WARNING
LIGHTS AND
MESSAGES

LOW BATTERY CHARGE (red)

Warning light
on dial

IN AN
EMERGENCY

Message on reconfigurable
multifunction display

179

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

CITY

g

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

"DUALDRIVE" ELECTRIC POWER
STEERING ENGAGEMENT
When engaging the "Dualdrive electric power
steering the instrument panel will show the message
CITY. This message will go off the display when
disengaging the electric power steering.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

180

Downloaded from www.Manualslib.com manuals search engine

“DUALDRIVE” ELECTRIC POWER
STEERING FAILURE (where provided) (red)
Turning the ignition key to MAR the warning light
on the dial turns on, but it should go off after few
seconds.
If the warning light stays on (on certain versions
together with the message on the display), you will
not have steering assistance and the effort on the
steering wheel will be increased, steering is however
possible. Contact Fiat Dealership.



Normal driving conditions: stop the car,
switch off the engine and check whether the
water level in the reservoir is not below the MIN
mark. Otherwise wait for few seconds to allow
engine cooling, then open slowly and carefully
the cap, top up coolant and check whether its
level is falling between MIN and MAX marks in
the reservoir. Check visually any leak. If when
restarting the warning light comes on again,
contact a Fiat Dealership;

continues on next page

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

The warning light turns on (on certain versions
together with the message on the display) when the
engine is overheated. If the warning light comes on
when driving, proceed as follows:

IN AN
EMERGENCY

Turning the ignition key to MAR the warning light
on the dial turns on, but it should go off after few
seconds.

ç

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

HIGH TEMPERATURE ENGINE COOLANT
FLUID (red)

Warning light
on dial

INDEX

Message on reconfigurable
multifunction display

181

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

ç

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

182

Downloaded from www.Manualslib.com manuals search engine

continued from previous page


Car heavy duty (e.g.: towing trailer uphill or
fully laden car): decrease speed, if the warning
light stays on, stop the car. Wait for 2 or 3
minutes leaving the engine on and slightly
accelerated to further activate the circulation of
the coolant fluid, then switch the engine off.
Check proper coolant level as described
previously.

IMPORTANT Under severe use of the car, keep the
engine on and slightly accelerated for few minutes
before switching it off.

´

Symbols ¯/˙ shown on the multifunction display
indicate incomplete left/right door closing.
With doors and boot open, if 4 km/h speed is
exceeded the buzzer will sound (only for versions
with reconfigurable multifunction display).

5 door versions

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IMPORTANT On versions not fitted with electric
door lock, no warning message will be displayed if
door is not perfectly closed or is left open.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

The warning light on the dial turns on (on certain
versions together with the message on the display)
when one or more doors, the boot (indication fitted
on some versions only) or the bonnet are not
properly shut.

DASHBOARD
AND
CONTROLS

3 door versions

SAFETY
DEVICES

Warning light
on dial

IN AN
EMERGENCY

INCOMPLETE DOOR LOCKING (red)

Message on reconfigurable
multifunction display

183

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

è

ç

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

184

Downloaded from www.Manualslib.com manuals search engine

SPEED LIMIT EXCEEDED (amber)
The warning light on the dial turns on (on certain
versions together with the message on the display)
when the car exceeds the speed limit set previously
(see “Reconfigurable multifunction display” in the
“Dashboard and controls” section).

FUEL RESERVE (amber)
Turning the ignition key to MAR, the warning light
on the instrument panel shall turn on but it should
go off after a few seconds.
The warning light turns on (on certain versions
together with the message on the display) when
about 5 - 7 litres fuel are left in the tank.
IMPORTANT The warning light flashes to indicate a
system failure. In this case contact Fiat Dealership to
have the system checked.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Messages will be shown on the display when range
falls below 50 km.

DASHBOARD
AND
CONTROLS

LIMITED RANGE

Warning light
on dial

SAFETY
DEVICES

Message on reconfigurable
multifunction display

185

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

U

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

186

Downloaded from www.Manualslib.com manuals search engine

EOBD - ENGINE CONTROL SYSTEM
FAILURE (amber)
In normal conditions, turning the ignition key to
MAR, the warning light turns on, but it should go off
when the engine has started. The initial turning on
indicates that the warning light is working properly.
If the warning light stays on or turns on when
travelling (on certain versions together with the
message on the display):


glowing steadily - means a fault in the
supply/ignition system which could cause high
emissions at the exhaust, possible lack of
performance, poor handling and high
consumption levels.

In these conditions it is possible to continue driving
without however requiring heavy effort or high
speed from the engine. Prolonged use of the car
with the warning light on may cause damages.
Contact Fiat Dealership as soon as possible.

INDEX

If, turning the ignition key to MAR, the U warning light does not turn on or if it turns on
glowing steadily or flashing when travelling (on certain versions together with the message on
the display), contact Fiat Dealership. Warning light U operation can be checked by traffic
agents by proper equipment. Therefore comply with laws and regulations of the country
where you are driving.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

If the light flashes, it is necessary to release the
accelerator pedal to lower the speed of the engine
until the warning light stops flashing; continue the
journey at moderate speed, trying to avoid driving
conditions that may cause further flashing and
contact Fiat Dealership as soon as possible.

DASHBOARD
AND
CONTROLS

U

flashing - indicates the possibility of damage to
the catalyst (see “EOBD system” in the
“Dashboard and controls” section).

SAFETY
DEVICES



CORRECT USE
OF THE CAR

The warning light goes off if the fault disappears, but
it is still stored by the system.

Warning light
on dial

WARNING
LIGHTS AND
MESSAGES

Message on reconfigurable
multifunction display

187

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

Message on reconfigurable
multifunction display

á
á

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Warning light
on dial

ESP SYSTEM FAILURE (where provided) SYSTEM NOT AVAILABLE (amber)
Turning the ignition key to MAR, the warning light
on the dial comes on but shall go off after few
seconds.
If the warning light does not go off or stays on when
travelling (on certain versions together with the
message on the display) and with led on ASR OFF
button, contact Fiat Dealership.

*

INDEX

IN AN
EMERGENCY

*

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Warning light flashing when driving indicates that the
ESP system is active.

188

Downloaded from www.Manualslib.com manuals search engine

Hill Holder failure - System not available
Hill holder failure is indicated by warning light *
coming on (on certain versions together with the
message on the display). Contact Fiat Dealership as
soon as possible.

Messages are displayed (on certain versions) when
the ASR function is activated/deactivated manually
(see “ASR system” in the “Dashboard and controls”
section).

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

ASR system switching off is indicated by the
switching on of the ASR OFF button led (see "ASR
system" in section "Dashboard and controls").

SAFETY
DEVICES

ASR - WHEEL ANTISKID SYSTEM (amber)

Warning light
on dial

CORRECT USE
OF THE CAR

Message on reconfigurable
multifunction display

189

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

m

GLOW PLUG WARMING FAILURE
(only diesel versions) (amber)

m

GLOW PLUGS (only diesel versions) (amber)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Message on
reconfigurable

190

Downloaded from www.Manualslib.com manuals search engine

The warning light on the dial flashing (on certain
versions together with the message on the display)
when there is a failure in the glow plug warming
system. Contact Fiat Dealership as soon as possible
to have the fault eliminated.

Turning the ignition key to MAR, the warning light
on the dial comes on and goes off when glow plugs
reach the preset temperature. Start the engine
immediately after warning light switching off.
IMPORTANT With high ambient temperature,
warning light stays on for very short time.

or

è
(Versions with
reconfigurable
multifunction
display)

The presence of water in the fuel circuit may cause serious damage to the entire injection system
and cause irregular engine operation. If warning light c or ècomes on the dial (on certain versions
a message is displayed on the reconfigurable multifunction display), contact Fiat Dealership as soon
as possible to have the system relieved. Should the above warning indication come one immediately
after topping up, water has probably been poured into the tank: turn the engine off immediately
and contact Fiat Dealership.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

(Versions with
digital display
and multifunction display)

WARNING
LIGHTS AND
MESSAGES

Turning the ignition key to MAR, the warning light
c (if present) on the instrument panel shall turn on
but it should go off after a few seconds.

c

IN AN
EMERGENCY

The warning light on the dial turns on (on certain
versions a message is displayed on the
reconfigurable multifunction display) when there is
water in the diesel fuel filter.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WATER IN DIESEL FUEL FILTER
(only diesel versions) (amber)

Warning light
on dial

INDEX

Message on reconfigurable
multifunction display

191

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Warning light
on dial

Message on reconfigurable
multifunction display

>
>

x
+
>

x
+
>

192

Downloaded from www.Manualslib.com manuals search engine

INEFFICIENT ABS SYSTEM - SYSTEM NOT
AVAILABLE (amber)
Turning the ignition key to MAR the warning light
on the dial turns on, but it should go off after few
seconds.
The warning light turns on (on certain versions
together with the message on the display) when the
system is inefficient or not available. In this case the
braking system keeps its effectiveness unchanged,
but without the potential offered by the ABS
system. Caution is advisable, particularly in all cases
of less than perfect grip. It is therefore necessary to
contact Fiat Dealership.
EBD failure - System not available
The turning on at the same time of the x and >
warning lights on the dial (on certain versions
together with the message on the display) with the
engine running indicates an EBD system failure; or
that the system is not available. In this case heavy
braking may cause the rear wheels to lock before
time, with the possibility of skidding. Drive with the
utmost care to the nearest Fiat Dealership to have
the system checked.

IMPORTANT The turning on at the same time of
the U and Y warning lights indicates a failure of
the Fiat CODE system.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

If with the engine running the Y warning light
flashes, this means that the car is not protected by
the engine inhibitor device (see “The Fiat Code
system” in the “Dashboard and controls” section).
Contact Fiat Dealership to have all the keys
memorised.

Y

CORRECT USE
OF THE CAR

Turning the key to MAR the warning light on the
dial shall flash only once and then go off. If with the
ignition key at MAR the warning light stays on, this
indicates a possible failure (see “The Fiat Code
system” in the “Dashboard and controls” section).

WARNING
LIGHTS AND
MESSAGES

CAR PROTECTION SYSTEM FAILURE FIAT CODE (amber)

Warning light
on dial

IN AN
EMERGENCY

Message on reconfigurable
multifunction display

193

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction displayWarning light

W

EXTERNAL LIGHT FAILURE (amber)
The warning light on the dial comes on (on certain
versions together with the message on the display)
when a failure is detected to one of the following
lights: taillights, brake lights (3rd stop light excluded),
rear fog lights, direction indicators.
The failure referring to these lights could be: one or
more blown bulbs, a blown protection fuse or a cutoff electric connection.
Symbols ¯/ ˙ (where provided) coming on on the
multifunction display indicate a left/right-hand light
failure.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

194

Downloaded from www.Manualslib.com manuals search engine

continues on next page

The failure referring to these lights could be: one or
more blown bulbs, a blown protection fuse or a cutoff electric connection.

DASHBOARD
AND
CONTROLS
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Symbols ¯/ ˙ (where provided) coming on on the
multifunction display indicate a left/right-hand light
failure.

W

SAFETY
DEVICES

The warning light on the dial comes on (on certain
versions together with the message on the display)
when a failure is detected to one of the following
lights: taillights, brake lights (3rd stop light excluded),
rear fog lights, direction indicators.

CORRECT USE
OF THE CAR

EXTERNAL LIGHT FAILURE (amber)

Warning light
on dial

WARNING
LIGHTS AND
MESSAGES

Message on reconfigurable
multifunction display

195

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

Message on reconfigurable
multifunction display

4

REAR FOG LIGHTS (amber)

5

FRONT FOG LIGHTS (green)

R

LEFT-HAND DIRECTION INDICATOR
(green) (intermittent)

E

RIGHT-HAND DIRECTION INDICATOR
(green) (intermittent)

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Warning light
on dial

(

196

Downloaded from www.Manualslib.com manuals search engine

The warning light on the dial turns on when the rear
fog lights are turned on.

The warning light on the dial turns on when the
front fog lights are turned on.

The warning light on the dial turns on when the
direction indicator control lever is moved
downwards or, together with the right indicator,
when the hazard warning light button is pressed.

The warning light on the dial turns on when the
direction indicator control lever is moved upwards
or, together with the left indicator, when the hazard
warning light button is pressed.
HEATED REAR WINDOW (amber)
The warning light on the dial turns on when the
heated rear window is turned on.

MAIN BEAMS (blue)
The warning light on the dial turns on when the
main beams are turned on.
CRUISE CONTROL (where provided)
(green)
Turning the ignition key to MAR, the warning light
Ü(if present) on the instrument panel shall turn on
but it should go off after a few seconds.
The warning light on the dial comes on (on certain
versions together with the message on the display),
with the knurled ring of the cruise control in the
ON position, when the device starts to intervene on
the engine.

Downloaded from www.Manualslib.com manuals search engine

3

1

Ü

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

The warning light on the dial comes on (on certain
versions together with the message on the display)
when the "Follow me home" device is activated (see
"Follow me home" in the "Dashboard and controls"
section).

WARNING
LIGHTS AND
MESSAGES

FOLLOW ME HOME

3

IN AN
EMERGENCY

The warning light on the dial turns on when
sidelights, parking lights or low beams are turned
on.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

SIDELIGHTS AND LOW BEAMS (green)

Warning light
on dial

INDEX

Message on reconfigurable
multifunction display

197

DASHBOARD
AND
CONTROLS

Message on reconfigurable
multifunction display

è

GENERIC FAILURE INDICATION

è

DIESEL FUEL FILTER SENSOR FAILURE

The warning light on the dial comes on when a
failure is detected.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Warning light
on dial

198

Downloaded from www.Manualslib.com manuals search engine

The warning light on the dial comes on (on certain
versions together with the message on the display)
when dieel fuel filter sensor failure is detected.
Contact Fiat Dealership as soon as possible to have
the fault removed.

POSSIBLE PRESENCE OF ICE
ON THE ROAD (reconfigurable
multifunction display version only)
Warning message will appear and temperature
indication will flash on the display when the outside
temperature reaches or falls below 3°C to warn the
driver of the possible presence of ice on the road.

FIX & GO (QUICK TYRE REPAIR KIT)..........................

209

WHEN NEEDING TO CHANGE A BULB ...................

214

IF AN EXTERIOR LIGHT BURNS OUT.........................

217

IF AN INTERIOR LIGHT BURNS OUT..........................

222

IF A FUSE BLOWS................................................................

224

IF THE BATTERY IS FLAT..................................................

231

JACKING THE CAR.............................................................

232

TOWING THE CAR............................................................

233

DASHBOARD
AND
CONTROLS

202

SAFETY
DEVICES

IF A TYRE IS PUNCTURED...............................................

CORRECT USE
OF THE CAR

200

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

ENGINE STARTING ............................................................

WARNING
LIGHTS AND
MESSAGES

IN AN EMERGENCY

199

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

ENGINE STARTING



The warning light U will start flashing again: after it
has flashed the number of times that corresponds
to the second figure on the CODE card, press the
accelerator pedal to the floor and keep it there;



Do the same for the remaining figures on the
CODE card;



Read the whole procedure carefully before trying to
carry it out. If you make a mistake, you must turn the
ignition key back to STOP and repeat the whole
operation from beginning.

Once the final figure has been entered, keep the
accelerator pedal pressed. The warning light U
will light up for 4 seconds and then goes out.
Release the accelerator pedal;



Rapid flashing of the warning light U (for about 4
seconds) confirms the operation has been carried
out successfully;

Proceed as follows:



Start the engine by turning the ignition key from
MAR to AVV.

EMERGENCY START-UP
If the Fiat CODE system fails to deactivate engine
immobilising system the warning lights Y and U
stay on and the engine cannot be started.
To start the engine the emergency start-up can be
performed.



Read the 5-figure electronic code given on the
CODE card;



Turn the ignition key to MAR;



Press and hold down the accelerator pedal. The
warning light U turns on for about 8 seconds, and
then goes off;



Release the accelerator pedal and get ready to
count the flashes of the U warning light;



Count the number of flashes that corresponds to
the first figure of the code on the CODE card, then
press the accelerator pedal and keep it there until
the U warning light comes on (for 4 seconds) and
then goes off; release the accelerator pedal;

200

Downloaded from www.Manualslib.com manuals search engine

If however the warning light U stays on, turn the
ignition key to STOP and repeat the procedure from
step one
IMPORTANT After an emergency start-up, you should
contact a Fiat Dealership otherwise you will have to
repeat the procedure described each time you want to
start the engine.

DASHBOARD
AND
CONTROLS

JUMP STARTING
If the battery is flat, it is possible to start the engine using an auxiliary
battery with the same capacity or a little higher than the flat one.

F0I0140m



Start the engine;



When the engine has been started, remove the leads reversing the
order above.

If after a few attempts the engine does not start, do not insist but contact
the nearest Fiat Dealership.
IMPORTANT Do not directly connect the negative terminals of the two
batteries: any sparks may ignite the detonating gas which could come out
of the battery. If the auxiliary battery is installed on another car, avoid
metal parts touching accidentally between this car and the one with the
flat battery.
Never use a battery charger to start the engine as this could damage the electronic systems of your
vehicle, particularly the ignition and fuel supply control units.

WARNING

This starting procedure must be carried out by qualified personnel because
incorrect operations may cause electrical discharge of considerable intensity. The
liquid contained in the battery is poisonous an corrosive. Avoid contact with the
skin and eyes. Keep naked flames and lighted cigarettes away from the battery and
do not cause sparks.

CORRECT USE
OF THE CAR

the car to be started;

E

WARNING
LIGHTS AND
MESSAGES

With a second lead, connect the negative terminal (–) of the auxiliary
battery and to an earthing point E on the engine or the gearbox of

IN AN
EMERGENCY



TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Connect positive terminals (+) of the two batteries with a jump lead;

INDEX



SAFETY
DEVICES

Proceed as follows:

201

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

IF A TYRE IS PUNCTURED

Never bump start the engine (by pushing, towing or
coasting downhill). This could cause fuel to flow into
the catalytic converter and damage it beyond repair.

GENERAL INSTRUCTIONS

IMPORTANT Remember that the servobrake and
electrical power steering system are not operating
until the engine is started, a greater effort will
therefore be required to press the brake pedal or turn
the steering wheel.

WARNING

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

BUMP STARTING

WARNING

Wheel changing and correct use of the jack and spacesaver spare wheel call for some precautions as listed
below.
IMPORTANT If the vehicle is fitted with “Fix & Go
(quick tyre repair kit)”, see the relevant instructions in
the following chapter.

Alert other drivers that the car is stationary in compliance with local regulations:
hazard warning lights, warning triangle, etc. Any passengers on board should leave
the car, especially if it is heavily laden. Passengers should stay away from
oncoming traffic while the wheel is being changed. If parked on a slope or rough
surface, chock the wheels with wedges or other suitable devices to prevent the car
from rolling.
The space-saver spare wheel is specific to your car, do not use it on other
models, or use the spare wheel of other models on your vehicle.
The space-saver spare wheel shall only be used in an emergency. It shall
only be used for the distance necessary to reach a service point and the
car speed shall not exceed 80 km/h. The spare wheel has an orange sticker
that summarises the main cautions for use and limitations. The sticker
should never be removed or covered. Never fit a wheel cap on a
space-saver spare wheel. The sticker gives the following information
in four languages: CAUTION ! FOR TEMPORARY USE ONLY ! 80 KM / H MAX ! REPLACE
BY NORMAL WHEEL AS SOON AS POSSIBLE . DO NOT COVER THIS LABEL
IN USE .

202

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

When driving with a space-saver spare wheel fitted, the driving performance of the
car changes. Avoid accelerating or braking sharply, abrupt turns or fast cornerings.
The life of the spare wheel is approx. 3000 Km, after this distance it should be
replaced with another of the same type. Never attempt to fit a conventional tyre
on a rim designed for use as a space-saver spare wheel. Have the punctured wheel
repaired and refitted as soon as possible. Two or more space-saver spare wheels
should never be used together. Do not grease the threads of bolts before installing
them: they might slip out.

WARNING

Fasten the wheel cap correctly to prevent the wheel from coming free in motion.
Never tamper with the inflation valve. Never place tools between the rim and tyre.
Check and restore, if required, the pressure of tyres and spare wheel to the values
given in the “Technical specifications” section.

IN AN
EMERGENCY
TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The jack shall only be used for changing wheels on the car with which it is provided
or on cars of the same model. It must not be used for other purposes such as for
instance raising cars of other models. In no case should it be used for repairs under
the car. Incorrect positioning of the jack may cause the jacked vehicle to fall. Do
not use the jack for higher capacities than stated on its label. Snow chains cannot
be fitted to the space-saver spare wheel. So, if a front (drive) wheel is punctured
and chains are needed, a rear wheel should be fitted to the front of the vehicle and
the spare wheel should be fitted to the rear. This way with two normal drive
wheels, snow chains can be fitted to them to solve an emergency.

INDEX

WARNING

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

WARNING

203

Downloaded from www.Manualslib.com manuals search engine

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

Please note:

204

Downloaded from www.Manualslib.com manuals search engine



the jack weight is 1.85 kg;



the jack requires no adjustment;



the jack cannot be repaired: in the event of a fault it must be replaced
by another original one;



no tool other than its cranking device may be fitted on the jack.

To change a wheel proceed as follows:
F0I0110m



Stop the car in a position that is not dangerous for oncoming traffic
where you can change the wheel safely. The ground should be flat and
adequately firm;



Turn the engine off and pull up the handbrake;



Engage first gear or reverse;



Lift the luggage compartment panel mat ;



Loosen the clamping device (A) using wrench (B) if required;



Take out the tool container and take it near to the wheel to be
changed;



Take the spare wheel;



for versions fitted with press-fit wheel cap, remove the
wheel cap avoiding to damage it;



Using the wrench provided (B) loosen the fastening bolts by about
one turn. If the car is fitted with alloy rims, shake the car to facilitate
removing the rim from the wheel hub;



Warn anybody nearby that the car is about to be lifted. They must
stay clear and not touch the vehicle until it is back on the ground;



Operate the jack and raise the car until the wheel is a few centimetres
from the ground;
Undo the four wheel bolts and remove the wheel.



Make sure the surfaces of the space-saver spare wheel that come into
contact with the hub are clean and free from any impurities that could
cause wheel bolts loosening;

F0I0111m

F0I0112m

INDEX

D

F0I0113m

Downloaded from www.Manualslib.com manuals search engine

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY



DASHBOARD
AND
CONTROLS

Extend the jack until the groove (D) on the jack fits correctly into
ridge (E) underneath the sidemember;

SAFETY
DEVICES



CORRECT USE
OF THE CAR

Fit the handle and operate it to partially open the jack. Position the
jack under the car (see figure) at the reference points (C) near the
wheel to be replaced;

WARNING
LIGHTS AND
MESSAGES



205

DASHBOARD
AND
CONTROLS

F0I0114m

IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

206

Downloaded from www.Manualslib.com manuals search engine

Install the spare wheel matching the holes (F) with the corresponding
pin (G);



Using the wrench provided, fully tighten the four fastening bolts;



Work the jack handle to lower the car and remove the jack;



Using the wrench provided, tighten up the wheel bolts in a criss-cross
fashion following the sequence shown.

IMPORTANT Do not fit the wheel cap to the space-saver wheel.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

80



F0I0115m

IMPORTANT You will need to change the set of bolts if you want to
change the type of wheels fitted (alloy rims instead of steel rims, and vice
versa); have this operation performed by skilled personnel. You should
keep the bolts and spare wheel in case you decide to use the original
type of wheel later on.

DASHBOARD
AND
CONTROLS

REFITTING THE STANDARD WHEEL

Make sure the contact surfaces between wheel and hub are clean so
that the fastening bolts will not come loose;



Fit the standard wheel by inserting the first stud (B) for two threads in
the hole closest to the inflation valve (A);



for cars fitted with press-fit wheel cap, press the cap edge with your
palms (without hitting it) against the wheel;



Fit the wheel cap, making the symbol C (on the back of the cap)



Fasten bolts using the wrench provided;



Lower the car and remove the jack;



fasten the bolts in the order shown above.

F0I0116m

IN AN
EMERGENCY

coincide with the inflation valve and fit the other three bolts;

F0I0117m

INDEX

IMPORTANT Incorrect fitting may cause the wheel cap to come off
when the car is travelling.

CORRECT USE
OF THE CAR



WARNING
LIGHTS AND
MESSAGES

Following the procedure described previously, raise the car and
remove the spare wheel;

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE



SAFETY
DEVICES

Proceed as follows:

207

Downloaded from www.Manualslib.com manuals search engine

F0I0110m

IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

208

Downloaded from www.Manualslib.com manuals search engine



Stow the spare wheel in the space provided in the boot;



Refit the jack in its support as shown on the tool container;



Put the tools back into their places in the container;



Stow the container complete with tools on the spare wheel;



Fasten the tool container retainer (A).

Use the extension shown in the figure to fasten or loosen the inflation
valve.
IMPORTANT Do not use inner tubes with Tubeless tyres.

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

When you have finished

F0I0118m

DASHBOARD
AND
CONTROLS

FIX & GO (QUICK TYRE REPAIR KIT)
(where provided)

The Fix & Go kit is located in the boot under the moquette covering and
it includes the following:
F0I0120m

a compressor (C) including gauge, connections and tool for removing
the valve body; the latter can be found by opening the compressor
slide lid (D).

WARNING
LIGHTS AND
MESSAGES



a cylinder (A) containing the sealing fluid with filler hose and a sticker
(B) with caution “MAX 80 km/h”, to be affixed in a visible position for
the driver (instrument panel) after repairing the tyre;

IN AN
EMERGENCY

IMPORTANT If puncture has been caused by foreign bodies, it is possible
to repair tyres showing damages up to max 4 mm diameter.
The figure shows:
(A): repairable tyre areas
(holes or damages with max. 4 mm diameter);
F0I0121m

(B): tyre areas NOT repairable.

INDEX

IMPORTANT Holes and damages on the tyre side walls cannot be
repaired; permanent sealing of damages located on tyre tread within 25
mm from tyre side wall is not guaranteed. Check tyre side walls
accurately.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE



CORRECT USE
OF THE CAR

SAFETY
DEVICES

On request the car can be fitted with a quick tyre repair kit, called “Fix &
Go”, replacing the common tool kit and the spare wheel.

F0I0016m

Downloaded from www.Manualslib.com manuals search engine

209

It should be noticed that:
The sealing fluid of the quick tyre repair kit, effective
with external temperatures between –30ºC and
+80ºC, is not suitable for final repair.
The fluid inside the tyre can be easily removed with
water.

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

IMPORTANT Do not use the quick tyre repair kit if
damaging is due to running with flat tyre.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

The sealing fluid has unlimited life.

WARNING

WARNING

WARNING

Repairs are not possible in case of damages on the wheel rim (bad groove
distortion causing air loss) or tyre out of the limit areas previously described. Do
not remove foreign bodies (screws or nails) from the tyre.

Caution! The cylinder contains propylene glycol; this substance can be harmful and
irritant: do not swallow and avoid contact with eyes, skin and clothes; in case of
contact rinse immediately with water. Call the doctor in case of allergic reactions.
Keep the cylinder in the case provided for the purpose and far from heat or
children.

The compressor shall not be operated for more than 20 minutes. Risk of
overheating!

210

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

INFLATING PROCEDURE
Position the involved wheel with the inflation valve (A) set as shown
in the figure, then pull up the handbrake;



Screw the filler hose (B) to the cylinder (C);



Loosen tyre inflation valve cap, remove valve internal element using
the proper tool (D), taking care to protect it against sand or dirt;

INDEX

F0I0123m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0122m

CORRECT USE
OF THE CAR



SAFETY
DEVICES

Proceed as follows:

F0I0124m

Downloaded from www.Manualslib.com manuals search engine

211

DASHBOARD
AND
CONTROLS

Fit the filler hose (E) to the tyre inflation valve, keep the cylinder (F)
with the hose set downwards then press to make the sealing fluid
flowing into the tyre;



Refit valve internal element using tool (G);

SAFETY
DEVICES



Engage and then lock, using the proper lever (H) the air compressor
hose (L) to the tyre inflation valve;



Start the engine, fit the plug (N) in the cigar lighter (or 12V outlet)
and inflate the tyre to the proper pressure value. Check tyre pressure
on gauge (M) with compressor to obtain precise reading;



Should it be impossible to reach the pressure specified, move the car
forward or backward for approx. ten metres in order to distribute
the sealing fluid inside the tyre, then repeat the inflation operation;



If after this operation it is still impossible to obtain the specified
pressure, stop driving and contact immediately Fiat Dealership;

F0I0125m

F0I0126m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR



212

Downloaded from www.Manualslib.com manuals search engine

F0I0127m

Drive with the utmost care to the nearest Fiat Dealership to have the
tyre checked and repaired or replaced. It is of vital importance to
communicate that the tyre has been repaired using the quick tyre kit

DASHBOARD
AND
CONTROLS



SAFETY
DEVICES

After reaching the proper tyre pressure, start driving immediately to
distribute the sealing fluid inside the tyre evenly. After about 10
minutes, stop and check the tyre pressure again; engage the
handbrake;

IMPORTANT Tyre repaired with this kit can be used only temporarily.

WARNING

If read pressure is below 1.3 bar, stop immediately and contact Fiat
Dealership. If read pressure is equal to at least 1.3 bar, restore proper
pressure (engine running and handbrake on) and then drive with the utmost
care.
If when restoring pressure it is impossible to reach at least 1.8 bar, stop
immediately since the tyre is too damaged and the quick repair kit cannot
guarantee proper seal, contact Fiat Dealership.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING

Apply the sticker in a visible position for the driver to indicate that the tyre
has been treated with the quick tyre repair kit. Drive carefully especially
when cornering. Do not exceed 80 km/h and avoid heavy braking and
accelerating.

INDEX

WARNING

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0119m

CORRECT USE
OF THE CAR



213

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WHEN NEEDING TO
CHANGE A BULB
GENERAL INSTRUCTIONS


When a light is not working, check that the
corresponding fuse is intact before changing a bulb.
For the location of fuses, refer to the paragraph “If
a fuse blows” in this section;



Before changing a bulb check the contacts for
oxidation;



Burnt bulbs must be replaced by others of the
same type and power;



Always check the height of the headlight beam after
changing a bulb.

Halogen bulbs must be handled touching only the metallic part. If the transparent bulb is touched
with the fingers, its lighting intensity is reduced and life of the bulb may be compromised. If touched
accidentally, rub the bulb with a cloth moistened with alcohol and leave it to dry.

WARNING

Halogen bulbs contain pressurised gas, in the case of breakage they may burst.

WARNING

Alterations or repairs to the electric system not carried out correctly and without
taking into account of the system specifications may cause failures and the risk of
fire.

WARNING

Where possible, it is advisable to have bulbs changed c/o Fiat Dealership. The
correct operation and aiming of the outer lights are vital to safety of the car and
its passengers and the subject of specific laws.

214

Downloaded from www.Manualslib.com manuals search engine

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

IMPORTANT The headlight inner surface might be slightly misted: this
should not be considered irregular but a natural phenomenon due to low
temperature and the air humidity level. Misting will disappear as soon as
the headlights are turned on. Drops inside the headlight mean water
infiltration: contact Fiat Dealership.
TYPES OF BULBS

CORRECT USE
OF THE CAR

Various types of bulbs are fitted to your car:
(A) All glass bulbs: these are pressed on. Pull to remove.

WARNING
LIGHTS AND
MESSAGES

(B) Bayonet type bulbs: press the bulb, and turn counterclockwise to
remove this type of bulb from its holder.
(C) Tubular bulbs: free them from their contacts to remove.

INDEX

F0I0128m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

(D) Halogen bulbs: to remove, free it from the clip on its housing.

215

Downloaded from www.Manualslib.com manuals search engine

Type

Power

Main beam headlights

D

H1

55W

Dipped beam headlights

D

H7

55W

SAFETY
DEVICES

Front sidelights

A

W5W

5W

Taillights

B

R10W

10W

CORRECT USE
OF THE CAR

Front direction indicators

B

PY21W

21W

Side direction indicators

A

W5W

5W

Rear direction indicators

B

P21W/PY21W(*)

21W

Front fog lights



H3

55W

Brake lights

B

P21W

21W

Third stop (additional braking light)

A

W5W

5W

Reversing light

B

P21W

21W

Rear fog light

B

P21W

21W

Number plate light

A

W5W

5W

Ceiling light:
- with toggle lens
- with map lights

C
C

C10W
C10W

10W
10W

Boot light

A

W5W

5W

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

DASHBOARD
AND
CONTROLS

Ref. figure

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Bulbs

216

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

IF AN EXTERIOR LIGHT BURNS OUT

FRONT LIGHT UNITS
The front light units contain: sidelights, dipped beam, main beam and
direction indicator bulbs.
F0I0138m

(1): sidelights/main beam headlights;

WARNING
LIGHTS AND
MESSAGES

(2): dipped beam headlights;
(3): direction indicators.

IN AN
EMERGENCY

IMPORTANT After replacement, refit the covers correctly checking that
they are properly secured.
MAIN BEAM HEADLIGHTS
To change the bulb, remove the protective cover (1), release the catch
(A) and remove the bulb (B).

F0I0215m

DIPPED BEAM HEADLIGHTS

INDEX

To change the bulb, remove the protective cover (2), release the catch
(A) and remove the bulb (B).

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

The bulbs are arranged inside the light unit as follows:

CORRECT USE
OF THE CAR

SAFETY
DEVICES

For the type of bulb and power rating, see “When needing to change a
bulb”.

F0I0186m

Downloaded from www.Manualslib.com manuals search engine

217

DASHBOARD
AND
CONTROLS

FRONT SIDELIGHTS

F0I0188m

DIRECTION INDICATORS

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

To change the bulb, remove the protective cover (1), remove connector
(A) and remove the bulb (B).

Front

Side
To change the bulb, proceed as follows:
F0I0187m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

To change the bulb, remove the protective cover (3), turn connector (A)
clockwise and remove the bulb (B).

218

Downloaded from www.Manualslib.com manuals search engine

F0I0139m



Press the lens (A) in the direction of the arrow (opposite to running
direction) so to compress the clip (B) and remove the cluster;



Turn the lens (A) counterclockwise and remove it; then remove the
snap-fitted bulb (C).

DASHBOARD
AND
CONTROLS

FRONT FOG LIGHTS
Go to a Fiat Dealership to have bulbs replaced.

To change the bulb, proceed as follows:

from inside the boot, fit extension (C) on the light cluster fastening
nuts;



insert the provided screwdriver (D) in the hole in the extension and
loosen the light cluster fastening nuts;



withdraw the connector and loosen the fastening screws shown in the
figure by the arrows;



remove the bulbs by pushing them slightly and turning them
anticlockwise (bayonet coupling).

F0I0163m

WARNING
LIGHTS AND
MESSAGES



IN AN
EMERGENCY

from inside the car, remove the upper plastic cover (A) with the
screwdriver provided to reach fastener (B);

INDEX

F0I0162m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE



CORRECT USE
OF THE CAR

SAFETY
DEVICES

REAR LIGHT UNIT

219

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

The bulbs are arranged inside the light unit as follows:
(A) - Side/taillight bulb
(B) - Brake light bulb
(D) - Bulb for:

F0I0213m

F0I0099m

INDEX
Downloaded from www.Manualslib.com manuals search engine

left-hand cluster: rear fog light



right-hand cluster: reversing light.

To change the bulb, proceed as follows:

IN AN
EMERGENCY
TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

220



ADDITIONAL BRAKING LIGHT (THIRD STOP)

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

(C) - Direction indicator bulb

F0I0100m



open the tailgate and loosen screws (A);



release the clip (B) and open the bulb holder, the remove the bulb (C)
to be replaced (clipped in).

DASHBOARD
AND
CONTROLS

NUMBER PLATE LIGHT
release the tab (A) and remove the cluster;



turn the bulb holder (B) anticlockwise and remove the bulb (C).

INDEX

F0I0103m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0102m

CORRECT USE
OF THE CAR



SAFETY
DEVICES

To change the bulb, proceed as follows:

221

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

IF AN INTERIOR LIGHT BURNS OUT

SAFETY
DEVICES

For the type of bulb and power rating, see “When needing to change a
bulb”.
CEILING LIGHT

F0I0135m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

With toggling lens

222

Downloaded from www.Manualslib.com manuals search engine

F0I0132m

To change the bulb, proceed as follows:


remove the ceiling light by releasing the clipped on lens frame in the
point shown by the arrow;



open the container (A) and replace the burnt-out bulb.

DASHBOARD
AND
CONTROLS

With map reading lights
remove the ceiling light (A) as shown by the arrows;



open the container (B) and replace the burnt-out bulb.

F0I0134m

BOOT LIGHT (where provided)
To change the bulb, proceed as follows:
remove the lens (A) as shown by the arrow;



lift protection (B) and remove the bulb (clipped in).

INDEX



TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0133m

CORRECT USE
OF THE CAR



SAFETY
DEVICES

To change the bulb, proceed as follows:

F0I0101m

Downloaded from www.Manualslib.com manuals search engine

223

DASHBOARD
AND
CONTROLS

IF A FUSE BLOWS
GENERAL

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The fuse is a protective device for the electric system: it comes into
action (i.e. it cuts off) mainly due to a fault or improper action on the
system.
F0I0239m

(B): undamaged fuse
(C): fuse with damaged filament.

WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

When a device does not work, check the efficiency of its fuse. The
conductor element (A) must be intact. If not, replace the fuse with one of
the same amp rating (same colour).

To facilitate fuse replacement, use the pliers (D) located in the fuse box.
Never replace a fuse with metal wires or anything else.

WARNING

Never replace a fuse with another with a higher amp rating; DANGER OF FIRE.

WARNING

If a general fuse (MAXI-FUSE) cuts in, do not attempt any repair and contact a
Fiat Dealership. Before replacing a fuse, make sure the ignition key has been
removed and that all the other services are switched off and/or disengaged.

WARNING

If fuse blows again, contact a Fiat Dealership.

224

Downloaded from www.Manualslib.com manuals search engine

The fuses of the car are grouped into two fuse boxes (thre for versions with Dualogic gearbox) to be found
respectively on the dashboard and in the engine compartment.
Fuse box on the dashboard

CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

F13

IN AN
EMERGENCY

F12

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

F44
F31

F51

F35
F42
F40
F53

F50

F49
F37
F43
F38

F32

F48
F33
F41
F39

F47

F52
F36

F45

F46

F34

Loosen the two screws (A) and open the cover (B) to reach the fuses in the dashboard fuse box. Refer to the table
on the following pages to identify the fuses.

A

INDEX

B

F0I0060m

Downloaded from www.Manualslib.com manuals search engine

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

FUSE LOCATION

225

DASHBOARD
AND
CONTROLS

Fuse box near the battery (only versions with Dualogic gearbox)
For the location of the protection fuse, see the Speedgear/Dualogic
supplement attached to this handbook.

SAFETY
DEVICES

Fuse box in the engine compartment

CORRECT USE
OF THE CAR

Loosen the retainers (A) and remove the cover (B). Refer to the table on
the following pages to identify the fuses.

F18

F04

F05

F07

F06

F01

F03
F14
F08

A

F55

B

226

Downloaded from www.Manualslib.com manuals search engine

F54

A

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F02

F0I0254m

F21

F15

F17

F10

F22

F19

F11

F16

F23

F30

F20

F09

A
F0I0059m

10

Right main-beam headlight

F14

10

Left main-beam headlight

F15

10

Boot

F39

10

Hazard lights

F53

10

Fog lights

F30

15

Direction indicators

F53

10

Dashboard instrument lights

F51

7.5

Cigar lighter

F51

7.5

Light system

F32

15

Ceiling light

F39

10

Instrument panel and warning lights (ignition switch powered)

F37

10

Instrument panel and warning lights (battery powered)

F53

10

Reversing light

F31

7.5

Brake lights

F37

10

Number plate light

F51

7.5

Additional brake light (third stop light)

F37

10

SERVICES

FUSE

AMPERE

Cigar lighter

F44

20

F50

7.5

F02 - MAXI FUSE

40

Air bag
Dashboard power: optional functions

DASHBOARD
AND
CONTROLS

10

F13

SAFETY
DEVICES

F12

Left dipped-beam headlight, headlight aiming device

CORRECT USE
OF THE CAR

Right dipped-beam headlight

WARNING
LIGHTS AND
MESSAGES

AMPERE

IN AN
EMERGENCY

FUSE

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

LIGHTS

INDEX

FUSE SUMMARY TABLE

227

Downloaded from www.Manualslib.com manuals search engine

AMPERE

F01 - MAXI FUSE

70

F31

7.5

F04 - MAXI FUSE

60

Right front power window

F48

20

Left front power window

F47

20

Door locking system

F38

20

Engine compartment ECU remote switch coils

F31

7.5

Ignition coils

F22

20

Engine control system secondary loads

F11

15

ABS control unit (ignition switch powered)

F42

7.5

Engine control unit (+battery)

F18

7.5

IN AN
EMERGENCY

Engine control unit (power)

F17

10

Engine control unit (ignition switch powered)

F16

7.5

Parking assistance control unit

F31

7.5

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Glow plug control unit

F11

15

Horn

F10

15

Manual climate control compressor

F19

7.5

Headlight aiming device

F13

10

F03 - MAXIFUSE

20

Petrol fume recirculation solenoid valve

F11

15

Heated diesel fuel filter

F20

20

Tachometer generator

F11

15

F54 - MAXI FUSE

60

INDEX

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

FUSE

SERVICES
Dashboard power: standard functions
Manual climate control
ABS/ESP system

Ignition switch

Glow plug heating system

228

Downloaded from www.Manualslib.com manuals search engine

20

Headlight washer

F09

20

Heated rear window

F40

25

F06 - MAXI FUSE

30

Fuel pump (1.28V version)

F22

20

Fuel pump

F21

15

Windscreen/rear window washer pump

One-speed radiator fan
(1.28V and 1.216V versions with heater)

F43

30

Radiator fan first speed
(1.28V and 1.216V versions with manual climate control system)

F06 - MAXIFUSE

30

Radiator fan first speed (1.816V and 1.9JTD versions)

F06 - MAXIFUSE

30

Radiator fan second speed (1.28V and 1.216V versions with manual climate control system)

F07 - MAXIFUSE

50

Radiator fan second speed (1.816V and 1.9JTD versions)

F07 - MAXIFUSE

40

Front heated seats

F45

15

Water in diesel fuel filter sensor (diesel versions)

F35

10

+ 30 utilities (sound system, automatic climate control system,
cellular phone presetting, EOBD diagnostic socket)

F39

10

+ 15 utilities (sound system, automatic climate control switch, Cruise Control,
ASR system cut-out control, cellular phone presetting,
dashboard control lights, heated seat switch, ESP system sensors,
rain sensor, fastened seat belt warning light)

F49

7.5

Brake pedal switch

F42

7.5

Electric power steering

F35

10

Electric power steering

F05 - MAXIFUSE

60

F11

15

Lambda sensor

DASHBOARD
AND
CONTROLS

F22

SAFETY
DEVICES

Injectors

CORRECT USE
OF THE CAR

15

WARNING
LIGHTS AND
MESSAGES

F36

IN AN
EMERGENCY

Subwoofer system

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

AMPERE

INDEX

FUSE

SERVICES

229

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

AMPERE

Engine cooling system relay

F18

7.5

Engine control system relay

F16

7.5

Heated rearview mirrors

F41

7.5

Windscreen wiper

F43

30

Rear window wiper

F52

15

Sunroof

F46

15

Passenger compartment fan

F08

30

Free

F33



Free

F34



INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

FUSE

SERVICES

230

Downloaded from www.Manualslib.com manuals search engine



connect the charger cables to the battery
terminals, observing the poles;



turn on the charger;



when you have finished, turn the charger off before
disconnecting the battery;



reconnect battery negative terminal.

DASHBOARD
AND
CONTROLS

disconnect battery negative terminal;

Do not attempt to charge a frozen battery: it must firstly be thawed,
otherwise it may burst. If freezing has occurred, the battery should be checked
by skilled personnel to make sure that the internal elements are not damaged
and that the body is not cracked, with the risk of leaking poisonous and
corrosive acid.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WARNING

The liquid contained in the battery is poisonous and corrosive. Avoid contact
with the skin or eyes. The battery should be charged in a well ventilated place,
away from naked flames or possible sources of sparks: danger of explosion
and fire.

INDEX

WARNING

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Charging should be slow at a low amp rating for 24
hours. Charging for a longer time may damage the
battery.



SAFETY
DEVICES

IMPORTANT Battery recharging procedure is given as
information only since this operation shall be only
performed at a Fiat Dealership.

Charge the battery as follows:

CORRECT USE
OF THE CAR

IF THE BATTERY IS FLAT

231

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

JACKING THE CAR
WITH THE JACK

WITH A SHOP JACK
From the front
F0I0171m

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

See “If a tyre is punctured” in this section.

From the side
The car can only be jacked up by positioning the arm at the reference
points in the area shown in the figure. Place a piece of rubber of suitable
thickness in between.

IN AN
EMERGENCY

WITH AN ARM HOIST
F0I0172m

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

232

Downloaded from www.Manualslib.com manuals search engine

Jack up the car only by positioning the jack arm at the gearbox/differential
and placing a rubber pad in between as shown in the figure.

F0I0173m

Jack up the car by arranging the ends of the arms in the areas shown in
the figure.

DASHBOARD
AND
CONTROLS

TOWING THE CAR

TOW HOOK PLUG REMOVAL PROCEDURE
To prevent damaging plug (A), proceed as follows:


fit the screwdriver down into the plug slot (B) for about 1 cm;



place your thumb on the plug to prevent damaging it (see figure);



remove the plug (without turning it) making a movement
perpendicular to the supporting surface (see figure).

F0I0240m

WARNING
LIGHTS AND
MESSAGES

take the screwdriver provided out of the tool container;

IN AN
EMERGENCY

SPORTING, HGT and SOUND versions
To prevent damaging plug (A), proceed as follows:


fit the screwdriver down into slot (B);



remove plug (A) by levering outwards.
F0I0249m

TOW RING HOOKING
Proceed as follows:
take the tow hook from its support;



tighten the hitch (B) on the front or rear threaded pin.

INDEX



TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE



CORRECT USE
OF THE CAR

SAFETY
DEVICES

The tow ring provided with the car is housed in the tool box under the
boot mat.

Front bumper

Downloaded from www.Manualslib.com manuals search engine

F0I0238m

233

DASHBOARD
AND
CONTROLS

TOWING PROCEDURE FOR VERSIONS WITH SPEEDGEAR
AND DUALOGIC TRANSMISSION

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

F0I0251m

Rear bumper

WARNING

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

For versions with Speedgear or Dualogic transmission, carry out the
above procedure and see the Supplement annexed to this Owner
Handbook.

WARNING

WARNING

Before starting to tow, turn the ignition key to MAR and then to STOP. Do not
remove the key. If the key is removed, the steering lock engages automatically
resulting in the impossibility to steer the wheels.

When towing, remember that without the help of the servobrake and power
steering, a greater effort is required on the pedal and steering wheel. Do not use
flexible cables for towing and avoid jerks. During towing operations make sure that
fastening the joint to the car does not damage the components in contact with it.
When towing the car, you must comply with the specific traffic regulations
regarding the tow ring and how to tow on the road.

Do not start the engine when towing the vehicle.

234

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

236
237
239
239
242
250
250
253
254
257
259
259
262
264

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

SCHEDULED SERVICING..................................................
SERVICE SCHEDULE ...........................................................
ANNUAL INSPECTION SCHEDULE..............................
ADDITIONAL CHECKS .....................................................
CHECKING FLUID LEVELS ...............................................
POLLEN FILTER....................................................................
AIR CLEANER .......................................................................
DIESEL FUEL FILTER............................................................
BATTERY ................................................................................
WHEELS AND TYRES.........................................................
RUBBER HOSES....................................................................
WINDSCREEN/REAR WINDOW WIPERS ..................
BODYWORK ........................................................................
INTERIORS.............................................................................

IN AN
EMERGENCY

CAR MAINTENANCE

235

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

Scheduled Servicing is performed by all Fiat Dealership,
at pre-established times.

Correct maintenance is essential for ensuring long car
life under the best conditions.

If during each operation, in addition to the ones
programmed, the need arises for further replacements
or repairs, these may be carried out only with the
explicit agreement of the Customer.

This is why Fiat has programmed a series of checks
and maintenance operations every 20,000 km.
It is however important to remember that scheduled
servicing does not completely cover all the car’s
requirements: also in the initial period before 20,000
km service coupon and later, between one coupon and
another, ordinary care is still required such as for
example routine check and topping up the level of
fluids, tyre pressure check, etc...
IMPORTANT The Programmed Maintenance coupons
are specified by the Manufacturer. The failure to have
them carried out may invalidate the warranty.

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

SCHEDULED SERVICING

236

Downloaded from www.Manualslib.com manuals search engine

IMPORTANT You are advised to contact Fiat
Dealership in the event of any minor operating faults,
without waiting for the next service coupon.
If your car is used frequently for towing, the interval
between one service coupon and the other must be
reduced.

140

Check tyre conditions/wear and
adjust pressure if required



















Check light system operation
(headlights, direction indicators, hazard lights, boot lights,
passenger compartment lights, dashboard warning lights, etc.)



















Check windscreen wiper/washer operation,
adjust nozzles



















Check windscreen/rear window blade position/wear



















Check front disk brake pad conditions and wear



















Check rear disk brake pad conditions
and wear (1.816V and 1.9 Multijet HGT versions)









Check rear drum brake lining conditions and wear

160 180







Sight inspect the conditions of: body external parts, underbody
protection, pipes and hoses (exhaust, fuel, brakes), rubber parts
(boots, sleeves, bushes, etc.)



















Check for bonnet and boot lock cleanness, lever cleanness
and lubrication



















Check tension and adjust accessory drive belts
(excluding engines with automatic belt tighteners)



Check tension and adjust accessory drive belts
Check and adjust tappet clearance
(1.9 JTD and 1.9 Multijet versions)



















DASHBOARD
AND
CONTROLS

120

SAFETY
DEVICES

100

CORRECT USE
OF THE CAR

80

WARNING
LIGHTS AND
MESSAGES

60

IN AN
EMERGENCY

40

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

20

Thousands of km

INDEX

SERVICE SCHEDULE

237

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

Thousands of km
Check and adjust tappet clearance (1.28V versions)
Check and adjust handbrake lever stroke
Check exhaust emissions/smoke (diesel versions)
Check antievaporation system (petrol versions)
Change diesel fuel filter cartridge
(diesel versions)
Change air cleaner cartridge (petrol versions)
Change air cleaner cartridge (1.9 JTD and 1.9 Multijet versions) (❏)
Check and top up, if required, fluid levels
(engine coolant, brakes, windscreen washer, battery, etc.)
Check timing belt conditions (■)
Replace timing belt (*) (■)
Change spark plugs (petrol versions)
Check engine control system operation
(through diagnosis socket)
Check mechanical transmission oil level
Change engine oil (❏)
Change engine oil filter (❏)
Change brake fluid (or every 2 years)
Change pollen filter (or every year)
(*) Or every 3 years for particularly demanding use:
- cold/hot climates;
- driving in the city idling for a long time;
- dusty roads or roads covered with sand and/or salt
Or every 5 years, regardless of the km covered and conditions of use.
(❏) Every 30.000 km for 1.3 Multijet versions
(■) Excluding 1.3 Multijet versions

238

Downloaded from www.Manualslib.com manuals search engine

20

40

60

80

100

120

140

160 180

































































































































































change engine oil;



change engine oil filter;



check tyre conditions/wear and adjust pressure if
required (including the spare wheel);



replace pollen filter (where provided).



check lighting system operation (headlights,
direction indicators, hazard lights, boot lights,
passenger compartment lights, warning lights, etc.);

ADDITIONAL CHECKS



check windscreen wiper/washer operation, adjust
nozzles;



check windscreen/rear window blade
position/wear;



check front disk brake pad conditions and wear;



check for bonnet and boot lock cleanness, lever
cleanness and lubrication



sight inspect the conditions of: engine, gearbox,
transmission, pipes and hoses (exhaust - fuel brakes), rubber parts (boots, sleeves, bushes, etc.);



check battery charge (by optical depth gauge);

Every 1,000 km or before long journeys, check and top
up if required:


engine coolant fluid level;



brake fluid level;



windscreen washer fluid level;



tyre pressure and conditions.

Every 3,000 km check and top up if required: engine
oil level.

INDEX

You are recommended to use FL Selenia products,
designed and produced specifically for Fiat cars (see
table “Capacities” in section “Technical
specifications”).

DASHBOARD
AND
CONTROLS

For cars with an annual mileage of below 20,000 km
(for example about 15,000 km) the following yearly
inspection programme is advised:

SAFETY
DEVICES

top up fluid levels (engine coolant, brakes,
windscreen washer, battery, etc.);

CORRECT USE
OF THE CAR



WARNING
LIGHTS AND
MESSAGES

visual check on various drive belt conditions;

IN AN
EMERGENCY



CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

ANNUAL INSPECTION
SCHEDULE

239

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

IMPORTANT - Engine oil

IMPORTANT - Pollen filter

Should prevailing use of the car be under one of the
following specially heavy conditions:


trailer or caravan towing;



dusty roads;

If the vehicle is used frequently in dusty or heavily
polluted environments it is advisable to replace the
filtering element more frequently; in particular it
should be replaced if a reduction of the amount of air
admitted to the passenger compartment is noted.



short distances (less than 7-8 km) repeated and
with external temperatures below zero;

IMPORTANT - Diesel filter



frequently idling engines or long distance low speed
driving (e.g. taxis or door-to-door deliveries) or in
case of a long term inactivity;

The possibility of topping up with diesel fuel not
complying with EN590 European Norm might make it
necessary to replace the filter more frequently than
indicated in the “Service schedule”.

replace engine oil more frequently than required on
“Service schedule”.

If the car is used on dusty roads change the air cleaner
more frequently than the indications in the “Service
schedule”.
If in doubt as to how often the engine oil and air
cleaner should be changed according to how you use
the car, contact a Fiat Dealership.

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

IMPORTANT - Air cleaner

240

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
INDEX

Car maintenance should be entrusted to Fiat Dealership. For routine and minor maintenance
operations you wish to carry out yourself, always make sure you have the proper equipment,
genuine Fiat spare parts and the necessary fluids; do not however carry out these operations if you
have no experience.

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

The charge in the battery should be checked at the
start of winter to limit the risk of electrolyte freezing.

This check should be carried out more frequently if
the car is used mainly for short trips, or if it is fitted
with accessories that permanently absorb electricity
even with the ignition key removed, especially in the
case of after market accessories. If the car is used in
hot climates or particularly harsh conditions it is wise
to check the level of the battery fluid (electrolyte)
more frequently than specified in the “Service
schedule” in this section.

CORRECT USE
OF THE CAR

IMPORTANT - Battery

241

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

4

IMPORTANT When topping up
take care not to confuse the
various types of fluids: they are
all incompatible with one
another and could seriously
damage the car.

1
2
5

1.28V mechanical gearbox version

F0I0231m

IMPORTANT Never smoke
while working in the engine
compartment: gas and
inflammable vapours may be
present, with the risk of fire.

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

3

CHECKING FLUID
LEVELS

INDEX

1 Engine oil - 2 Battery 3 Brake fluid 4 Windscreen/rear
window/headlight washer fluid 5 Engine coolant
F0I0226m

242

1.28V Dualogic gearbox version

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
F0I0072m

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

1.216V and 1.416V versions

WARNING
LIGHTS AND
MESSAGES

1 Engine oil - 2 Battery 3 Brake fluid 4 Windscreen/rear
window/headlight washer fluid 5 Engine coolant

INDEX

1 Engine oil - 2 Battery 3 Brake fluid 4 Windscreen/rear
window/headlight washer fluid 5 Engine coolant
1.816V version

Downloaded from www.Manualslib.com manuals search engine

F0I0233m

243

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

F0I0148m

1.3 Multijet version

5

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

1 Engine oil - 2 Battery 3 Brake fluid 4 Windscreen/rear
window/headlight washer fluid 5 Engine coolant

3

1

4

2

INDEX

1 Engine oil - 2 Battery 3 Brake fluid 4 Windscreen/rear
window/headlight washer fluid 5 Engine coolant
1.9JTD - 1.9 Multijet versions

244

Downloaded from www.Manualslib.com manuals search engine

F0I0211m

DASHBOARD
AND
CONTROLS

ENGINE OIL
Checking engine oil

Check that the level is within the MIN and MAX marks on the dipstick.
The interval between the MIN and MAX marks corresponds to about
one litre of oil.
1.28V versions with mechanical and
Dualogic gearbox

F0I0208m

1.216V and 1.416V versions

F0I0130m

1.816V versions

F0I0205m

WARNING
LIGHTS AND
MESSAGES

If the oil level is near or even below the MIN mark, add oil through the
filler neck, until reaching the MAX mark. Oil level shall never exceed the
MAX mark.

IN AN
EMERGENCY

IMPORTANT If a routine check reveals that the oil level is above the
MAX mark, contact Fiat Dealership to have the correct level restored.

INDEX

IMPORTANT After adding or changing the oil, let the engine turn over
for a few seconds and wait a few minutes after turning it off before you
check the level.

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

Topping up engine oil

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Check the oil level a few minutes (about 5) after the engine has stopped,
with the car parked on level ground.

Downloaded from www.Manualslib.com manuals search engine

245

DASHBOARD
AND
CONTROLS

Engine oil consumption
Max engine oil consumption is usually 400 grams every 1000 km.

IMPORTANT The oil consumption depends on driving style and the
conditions under which the car is used.
F0I0151m

1.3 Multijet versions

IMPORTANT Do not add oil with specifications other than that already
in the engine.

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

When the car is new, the engine needs to run in, therefore the engine oil
consumption can only be considered stabilised after the first 5000 - 6000
km.

F0I0204m

1.9JTD - 1.9 Multijet versions

WARNING

When the engine is hot, take care when working inside the engine compartment to
avoid burns. Remember that when the engine is hot, the fan may cut in: danger of
injury. Scarves, ties and other loose clothing might be pulled by moving parts.

Used engine oil and filter contain harmful substances for the environment.
Contact Fiat Dealership to have the oil and filter changed.

246

Downloaded from www.Manualslib.com manuals search engine

If the level is low, pour slowly a mixture of 50% distilled water and 50%
FL Selenia PARAFLU UP through the filler neck.

WARNING
LIGHTS AND
MESSAGES

F0I0054m

IN AN
EMERGENCY

The cooling system uses PARAFLU UP antifreeze. Do not
add fluid having different specifications from that already
existing. PARAFLU UP cannot be mixed with other types of
fluids. Should other fluids be added, do not start the engine
and contact Fiat Dealership as soon as possible.
F0I0147m

WARNING

Do not remove the reservoir cap when the engine is hot: you risk scalding yourself.

WARNING

The cooling system is pressurised. If necessary, replace the cap only with another
genuine one, otherwise system efficiency could be compromised.

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

Do not remove the reservoir cap when the engine is hot: you risk
scalding yourself.

MAX
MIN

INDEX

A 50-50 mixture of PARAFLU UP and distilled water gives freeze
protection to –35°C.

CORRECT USE
OF THE CAR

The coolant level shall be checked with cold engine and shall be included
between the MIN and MAX mark on the reservoir.

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

ENGINE COOLANT FLUID

247

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

WINDSCREEN/REAR WINDOW/HEADLIGHT WASHER
FLUID

CORRECT USE
OF THE CAR

SAFETY
DEVICES

To top up, remove the cap (A) and then pour a mixture of water and
TUTELA PROFESSIONAL SC 35, in the following concentrations:

F0I0145m



30% TUTELA PROFESSIONAL SC 35 and 70% water in summer;



50% TUTELA PROFESSIONAL SC 35 and 50% water in winter.

In case of temperatures below –20°C, use undiluted TUTELA
PROFESSIONAL SC 35.

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

WARNING

Do not travel with the windscreen washer reservoir empty: the windscreen washer
is fundamental for improving visibility.

INDEX

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Check level through the reservoir.

WARNING

Certain commercial additives for windscreen washers are inflammable. The engine
compartment contains hot components which may set it on fire.

248

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

BRAKE FLUID
Unscrew cap and check that the fluid level in the reservoir is at
maximum.

Make sure that the highly corrosive brake fluid does not drip onto the paintwork. If it does, wash it
off immediately with water.

WARNING

WARNING

Brake fluid is poisonous and highly corrosive. In the event of accidental
contact, wash the parts involved immediately with neutral soap and
water, then rinse thoroughly. Call the doctor immediately if the fluid is
swallowed.
The symbol π on the container indicates synthetic brake fluid, distinguishing it
from the mineral kind. Using mineral fluids irreversibly damages the special
braking system rubber seals.

WARNING
LIGHTS AND
MESSAGES

IMPORTANT Brake fluid absorbs moisture; for this reason, if the car is
mainly used in areas with a high degree of atmospheric humidity, the fluid
should be replaced at more frequent intervals than specified in the
“Service schedule”.

IN AN
EMERGENCY

F0I0055m

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

For topping up, always use a funnel with integrated filter with mesh equal
to or lower than 0.12 mm.

INDEX

If fluid has to be added, it is suggested to use the brake fluid in table
“Fluids and lubricants” (see chapter “Technical specifications”). When
opening cap take the utmost care to prevent impurities entering the tank.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Fluid level in the reservoir shall not exceed the MAX mark.

249

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

POLLEN FILTER

REPLACING THE FILTER
Loosen the screws (A) and remove the filtering element to be replaced.
F0I0152m

AIR CLEANER

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

The pollen filter is located under the dashboard near the central
dashboard unit on passenger side.

REPLACING THE FILTER

Loosen the screws on the side and on the air cleaner cover, remove the
cover (A) and remove the filtering element (B) to be replaced.
F0I0218m

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

1.28V versions (mechanical gearbox)

250

Downloaded from www.Manualslib.com manuals search engine

F0I0219m

DASHBOARD
AND
CONTROLS

1.28V versions (Dualogic gearbox)

F0I0227m

WARNING
LIGHTS AND
MESSAGES

1.216V and 1.416V versions

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Release clips (A), remove cover front part (B) and remove the filtering
element (C) to be replaced.

INDEX

F0I0228m

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Loosen the screws (A), remove the cover (B) and remove the filtering
element (C) to be replaced.

F0I0061m

Downloaded from www.Manualslib.com manuals search engine

F0I0062m

251

DASHBOARD
AND
CONTROLS

1.3 Multijet versions

F0I0149m

1.816V - 1.9JTD - 1.9 Multijet versions

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Loosen the screws (A), remove the cover (B) and remove the filtering
element (C) to be replaced.

F0I0150m

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

Loosen the screws (A), remove the cover (B) and remove the filtering
element (C) to be replaced.

252

Downloaded from www.Manualslib.com manuals search engine

F0I0220m

F0I0221m

WARNING
LIGHTS AND
MESSAGES
INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

The presence of water in the fuel circuit may cause serious damage to the entire injection system
and cause irregular engine operation. If warning light c or ècomes on the dial (on certain versions
a message is displayed on the reconfigurable multifunction display), contact Fiat Dealership as soon
as possible to have the system relieved. Should the above warning indication come one immediately
after topping up, water has probably been poured into the tank: turn the engine off immediately
and contact Fiat Dealership.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

DRAINING THE CONDENSE (diesel versions)

DASHBOARD
AND
CONTROLS

DIESEL FUEL FILTER

253

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

BATTERY

SAFETY
DEVICES

The battery is of the “Limited maintenance” type: under normal conditions
of use the electrolyte does not need topping up with distilled water.

CORRECT USE
OF THE CAR

CHECKING THE CHARGE

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0058m

The battery charge may be checked through the indicator (where fitted)
set on the battery cover and acting according to the colour the indicator
shows. If the battery is not fitted with electrolyte level indicator, the
relevant checks must only be carried out by authorised personnel.
To check the battery charge, slacken the two fastening screws and open
the cover. Check the battery charge and then reclose the cover, take care
to prevent pinching and short circuits. Refer to the table below or to the
label on the battery (see figure).

Bright white colour

Top up electrolyte

Contact Fiat Dealership

Dark colour
without green area in the centre

Low charge level

Charge the battery (advisable to
contact Fiat Dealership)

Dark colour
with green area in the centre

Electrolyte level and charge sufficient

No action

WARNING

The liquid in the battery is poisonous and corrosive. Avoid contact with eyes and
skin. Do not bring naked flames or possible sources of sparks near to the battery:
risk of fire and explosion.

WARNING

Running the battery with low fluid level can damage the battery beyond repair and
could also cause its explosion.

254

Downloaded from www.Manualslib.com manuals search engine

WARNING

If the car is left inactive for long periods at cold, remove the battery and store it in
a warm place to prevent freezing.

WARNING

When working on the battery or near it, always wear the proper goggles.

WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

Batteries contain substances that are very harmful for the environment. You are advised to have the
battery changed at a Fiat Dealership, which is properly equipped for disposing of used batteries
respecting nature and the law.

INDEX

Incorrect fitting of electrical and electronic accessories can seriously damage the car.
If after buying the car, you want to install electric accessories which require permanent electric
supply (alarm, sound system, free-hand phone kit, etc.) contact Fiat Dealership whose qualified
personnel, in addition to suggesting the most suitable devices, will evaluate the overall electric
absorption, checking whether the car’s electric system is capable of withstanding the load required,
or whether it should be integrated with a more powerful battery.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

If required, replace the battery with a genuine spare
part having the same specifications.

If a battery with different specifications is fitted, the
service intervals given in the “Service schedule” in this
section will no longer be valid. Refer to the
instructions provided by the battery manufacturer.

DASHBOARD
AND
CONTROLS

CHANGING THE BATTERY

255

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

If the car is left inactive for a long period of time, refer
to “Car inactivity”, in section “Correct use of the car”.



when you park the car, ensure the doors, tailgate
and bonnet are closed properly;



the ceiling lights must be off. The car is however
provided with an automatic system for switching off
internal lights;

If after buying the car, you want to install electric
accessories which require permanent electric supply
(alarm, free-hands set, etc.) contact Fiat Dealership
whose qualified personnel, in addition to suggesting
the most suitable devices, will evaluate the overall
electric absorption, checking whether the car’s electric
system is capable of withstanding the load required, or
whether it should be integrated with a more powerful
battery.



do not keep accessories (e.g.: sound system, hazard
lights, etc.) switched on for a long time when the
engine is not running;

In fact, since these devices continue absorbing energy
even when the ignition key is off, they gradually run
down the battery.



before performing any operation on the electrical
system, disconnect the battery negative cable;



battery terminals shall always be perfectly
tightened.

The total intake of these systems (factory and aftermarket) must be less than 0.6 mA x Ah (of the
battery) as shown in the following table:

To avoid draining your battery and lengthen its life,
observe the following indications:

IMPORTANT A battery which is kept at a charge of
less than 50% (optical indicator with dark colour
without green area in the middle) for any length of
time will be damaged by sulphation leading to a
reduction in cranking power. Moreover, this might
lead to a higher risk of the battery electrolyte freezing
(this may even occur at –10°C).

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

USEFUL ADVICE FOR
LENGTHENING THE LIFE OF YOUR
BATTERY

256

Downloaded from www.Manualslib.com manuals search engine

Battery

Maximum admitted
stand-by intake

40 Ah

24 mA

44 Ah

27 mA

50 Ah

30 mA

DASHBOARD
AND
CONTROLS

WHEELS AND TYRES

(B): low pressure: tread particularly worn at the edges.
(C): high pressure: tread particularly worn in the centre.
Tyres must be replaced when the tread wears down to 1,6 mm. In any
case, comply with the laws in the country where the car is being driven.
IMPORTANT NOTES
As far as possible, avoid sharp braking and screech starts, etc. Be
careful not to hit the kerb, potholes or other obstacles hard. Driving
for long stretches over bumpy roads can damage the tyres;



Periodically check that the tyres have no cuts in the side wall,
abnormal swelling or irregular tyre wear. If any of these occur, have
the car seen to at a Fiat Dealership;

INDEX



F0I0177m

WARNING
LIGHTS AND
MESSAGES

(A): normal pressure: tread evenly worn.

IN AN
EMERGENCY

Incorrect pressure causes abnormal tyre wear:

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

For the correct tyre inflation pressure, see “Wheels” in “Technical
specifications” section.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Check the pressure of each tyre, including the spare, every two weeks
and before long journeys. The pressure should be checked with the tyre
rested and cold.

257

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

Avoid overloading the vehicle when travelling: this
may cause serious damage to the wheels and tyres;



In the case of replacement, always fit new tyres,
avoiding those of dubious origin;



If a tyre is punctured, stop immediately and change
it to avoid damage to the tyre, the rim, suspensions
and steering system;



If a tyre is changed, also change the inflation valve;



To allow even wear between the front and rear
tyres, it is advisable to change them over every 1015 thousand kilometres, keeping them on the same
side of the car so as to not reverse the direction of
rotation.



Tyres age even if they are not used much. Cracks
in the tread rubber are a sign of ageing. In any case,
if the tyres have been on the car for over 6 years,
they should be checked by specialised personnel, to
see if they can still be used. Also remember to
check the spare wheel;

IN AN
EMERGENCY

WARNING

Remember that road holding depends also on the correct tyre inflating pressure.

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

WARNING

If the pressure is too low the tyre overheats and this can cause it serious damage.

WARNING

Do not cross switch the tyres, moving them from the right of the car to the left and
vice versa.

INDEX

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR



WARNING

Never submit alloy rims to repainting treatments requiring to use
temperatures exceeding 150°C since the mechanical properties of the wheels
could be impaired.

258

Downloaded from www.Manualslib.com manuals search engine

A few simple notions can reduce the possibility of
damage to the blades:

WARNING



if the temperature fall below zero, make sure that
ice has not frozen the rubber against glass. If
necessary, thaw using an antifreeze product;



remove any snow from the glass: in addition to
protecting the blades, this prevents effort on the
motor and overheating;



do not operate the windscreen and rear window
wipers on dry glass.

Driving with worn wiper blades is a serious hazard, because visibility is reduced in
bad weather.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

If the rubber blades are bent or worn they should be
replaced. In any case they should be changed once a
year.

WARNING
LIGHTS AND
MESSAGES

Periodically clean the rubber part using special
products; TUTELA PROFESSIONAL SC 35 is
recommended.

IN AN
EMERGENCY

Indeed ozone, high temperatures and prolonged lack
of fluid in the system may cause hardening and
cracking of the hoses, with possible leaks. Careful
control is therefore necessary.

BLADES

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

As far as the brake system and fuel rubber hoses are
concerned, carefully follow the “Service schedule” in
this section.

WINDSCREEN/
REAR WINDOW WIPERS

INDEX

RUBBER HOSES

259

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Changing the windscreen wiper blades

INDEX
Downloaded from www.Manualslib.com manuals search engine

raise the windscreen wiper arm (A) and position the blade so that it
forms an angle of 90° with the arm;



press tab (B) of the coupling spring and remove the blade to be
replaced from the arm (A);



fit the new blade by inserting the tab into the special slot in the arm.
Make sure it is properly locked into place.

Changing the rear window blade
Proceed as follows:

IN AN
EMERGENCY
CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

260



F0I0181m

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Proceed as follows:

F0I0182m



raise the cover(A) and remove the arm from the car, slackening the
nut (B) that fastens it to the pivot pin;



fit the new arm, positioning it correctly, and fully tighten the nut;



lower the cover.

DASHBOARD
AND
CONTROLS

SPRAY NOZZLES
Windscreen wiper

Then check that the nozzle holes are not clogged, if necessary use a
needle.
F0I0206m

WARNING
LIGHTS AND
MESSAGES

Fluid jets shall be directed at about 1/3 height from the window upper
edge.
Rear window wiper

IN AN
EMERGENCY

Rear window washer jets can be adjusted in the same way. The nozzle
holder is on the rear window.

INDEX

F0I0169m

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

The windscreen jets are directed by adjusting the angle of the nozzles:
turn the nozzle cylinder by inserting a screwdriver in (A).

CORRECT USE
OF THE CAR

SAFETY
DEVICES

If the jet of fluid is inadequate, firstly check that there is fluid in the
reservoir: see “Checking fluid levels” in this section).

261

Downloaded from www.Manualslib.com manuals search engine

The main causes of corrosion are the following:


atmospheric pollution;



salty air and humidity (coastal areas, or hot humid
climates);



seasonal environment conditions.

Not to be underestimated is also the abrasive action
of wind-borne atmospheric dust and sand and mud and
gravel raised by other vehicles.
On your Fiat Punto, Fiat implemented the best
manufacturing technologies to effectively protect the
bodywork against corrosion.

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

SAFETY
DEVICES

PROTECTION FROM ATMOSPHERIC
AGENTS

CORRECT USE
OF THE CAR

DASHBOARD
AND
CONTROLS

BODYWORK

262

Downloaded from www.Manualslib.com manuals search engine

These include:


Painting products and systems which give the car
particular resistance to corrosion and abrasion;



Use of galvanised (or pretreated) steel sheets, with
high resistance to corrosion;



Spraying the underbody, engine compartment,
wheelhouse internal parts and other parts with
highly protective wax products;



Spraying of plastic parts, with a protective function,
in the more exposed points: underdoor, inner
fender parts, edges, etc.;



Use of “open” boxed sections to prevent
condensation and pockets of moisture from
triggering rust inside.

BODY AND UNDERBODY
WARRANTY
Your Fiat Punto is covered by warranty against
perforation due to rust of any original element of the
structure or body. For the general terms of this
warranty, refer to Warranty Booklet booklet.

Normal paint maintenance consists in washing at
intervals depending on the conditions and environment
of use. For example, in highly polluted areas, or if the
roads are sprayed with salt, it is wise to wash the car
more frequently.
To correctly wash the car:


remove the aerial from the roof to prevent damage
to it if the car is washed in an automatic system;



wash the body using a low pressure jet of water;

Do not wash the car after it has been left in the sun or
with the bonnet hot: this may alter the shine of the
paintwork.
Exterior plastic parts must be cleaned in the same way
as the rest of the vehicle.
Where possible, do not park under trees; the resinous
substance many species release give the paint a dull
appearance and increase the possibility of triggering
rust processes.
IMPORTANT Bird droppings must be washed off
immediately and thoroughly as the acid they contain is
particularly aggressive.

Detergents cause water pollution. Therefore the engine compartment should be washed in areas
equipped for collecting and purifying the liquid used in the washing process.

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES

When drying, take particular care with the less visible
parts like door surrounds, bonnet and around the
headlights where water may stagnate. The car should
not be taken to a closed area immediately, but left in
the open so that residual water can evaporate.

CORRECT USE
OF THE CAR

rinse well with water and dry with a jet of air or a
chamois leather.

WARNING
LIGHTS AND
MESSAGES

In the case of deep scrapes or scores, you are advised
to have the necessary touching up carried out
immediately to avoid the formation of rust. Use only
original paint products for touching up (see
“Bodywork paint identification plate” in “Technical
specification” section).



IN AN
EMERGENCY

Paintwork does not only serve an aestethic purpose,
but also protects the underlying sheet metal.

wipe a sponge with a slightly soapy solution over
the bodywork, frequently rinsing with the sponge;

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

Paint



INDEX

ADVICE FOR PRESERVING THE
BODYWORK

263

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

INTERIORS

Front headlights
IMPORTANT Never use aromatic substances (e.g.:
petrol) or ketones (e.g.: acetone) for cleaning front
headlight plastic lens.
Windows
Use specific window cleaner products. Use also clean
cloths to avoid scratching the glass or damaging the
transparency.
IMPORTANT The inside of the rearscreen should be
wiped gently with a cloth in the direction of the
filaments to avoid damaging the heating device.

Periodically check that water is not trapped under the
mats (due to water dripping off shoes, umbrellas, etc.)
which could cause oxidisation of the sheet metal.
CLEANING SEATS AND FABRIC AND
VELVET PARTS
Use a soft brush or vacuum cleaner to remove dust.
Velvet is cleaned better if the brush is moistened.
Rub the seats with a sponge moistened with a solution
of water and neutral detergent.

Engine compartment
At the end of the winter the engine compartment
should be carefully washed, without directing the jet
against electronic control units. Contact a specialised
workshop to have this done.
IMPORTANT The car should be washed with the
engine cold and the ignition key at STOP. After
washing make sure that the various protections (e.g.:
rubber caps and various covers) have not been
damaged or removed.

WARNING

Never use inflammable products like fuel oil ether or rectified petrol for cleaning
inside the car. The electrostatic discharges generated when rubbing to clean may
cause fire.

264

Downloaded from www.Manualslib.com manuals search engine

For routine cleaning of interior plastic parts use a soft
cloth moistened with water and neutral soap. Remove
grease or persisting stains using appropriate solventfree products designed to preserve appearance and
colour of plastic components.

Remove liquid or grease stains with a dry absorbent
cloth without rubbing. Then wipe with a soft cloth or
chamois leather with water and neutral soap.
If the stain persists, use specific products, carefully
following the instructions for use.

IMPORTANT Never use spirit or petroleum to clean
the instrument panel or other plastic parts.

WARNING

Do not keep aerosol cans in the car: they might explode. Aerosol cans must never
be exposed to a temperature above 50°C. The temperature inside the car exposed
to the sun may go well beyond that figure.

INDEX

CAR
TECHNICAL
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

IMPORTANT Never use alcohol. Make sure that
cleaning products do not contain alcohol and alcohol
derivatives even at low strength.

DASHBOARD
AND
CONTROLS

Remove dried on dirt with lightly moistened chamois
leather or cloth without pressing too hard.

SAFETY
DEVICES

INTERIOR PLASTIC PARTS

CORRECT USE
OF THE CAR

CLEANING LEATHER SEATS

265

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

IDENTIFICATION DATA ..................................................
ENGINE CODES - BODYWORK VERSIONS ..............
ENGINE...................................................................................
FUEL FEED/IGNITION........................................................
TRANSMISSION ...................................................................
BRAKES ...................................................................................
SUSPENSIONS.......................................................................
STEERING...............................................................................
WHEELS ..................................................................................
DIMENSIONS ........................................................................
PERFORMANCE ...................................................................
WEIGHTS ...............................................................................
CAPACITIES...........................................................................
FLUIDS AND LUBRICANTS .............................................
FUEL CONSUMPTION.......................................................
CO2EMISSIONS.....................................................................

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

T E C H N I C A L S P E C I F I C AT I O N S

266

Downloaded from www.Manualslib.com manuals search engine

267
269
270
271
271
272
272
272
273
277
280
281
283
285
287
288

DASHBOARD
AND
CONTROLS

IDENTIFICATION DATA

INDEX

F0I0014m

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

F0I0199m

MODEL PLATE
The plate is to be found on the front crossmember of the engine
compartment and bears the following identification data:
A - Manufacturer’ name.
B - Homologation number.
C - Vehicle type code.
D - Chassis number.
E - Maximum vehicle weight fully loaded.
F - Maximum vehicle weight fully loaded with trailer.
G - Maximum vehicle weight on front axle.
H - Maximum vehicle weight on rear axle.
I - Engine type.
L - Body version code.
M - Spare part code.
N - Smoke opacity index (for diesel engines).

CORRECT USE
OF THE CAR

SAFETY
DEVICES

You are advised to note the identification codes. The identification data
stamped and given on the plates and their position are the following:
1 - Model plate
2 - Chassis marking
3 - Bodywork paint identification plate
4 - Engine marking.

267

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

CHASSIS MARKING
It is printed on the passenger compartment floor, near the right-hand
front seat.

CORRECT USE
OF THE CAR

SAFETY
DEVICES

It can be reached by lifting the special flap in the carpeting and includes
the following data:


chassis number.

The plate is applied on the inner side of the bonnet and it bears the
following data:

WARNING
LIGHTS AND
MESSAGES

A - Paint manufacturer.
B - Colour name.
C - Fiat colour code.
D - Respray and touch up code.
F0I0146m

ENGINE MARKING
Engine marking is stamped on the crankcase on gearbox side and includes
the model and the chassis number.

INDEX
Downloaded from www.Manualslib.com manuals search engine

car model (ZFA 188000);

BODYWORK PAINT
IDENTIFICATION PLATE

IN AN
EMERGENCY
TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

268



F0I0015m

1.28V with mechanical steering

188A4000

188AXA1A 00AC

188AXA1A 01AC

1.28V with electric power steering

188A4000

188AXA1A 00AD

188AXA1A 01AD

1.216V

188A5000

188AXB1A 02R

188BXB1A 03R

1.416V

843A1000

188AXM1A 20C
188AXM1A 20D (*)

188BXM1A 21C
188BXM1A 21D (*)

1.416V SPORTING

843A1000

188AXM1B 22B



1.816V

188A6000

188AXF1A 12E

188BXF1A 15D

1.3 Multijet

188A9000

188AXH1A 16L
188AXH1A 16N(*)

188BXH1A 17L
188BXH1A 17N(*)

1.9 JTD

188A7000

188AXG1A 13L

188BXG1A 14E

1.9JTD Sporting

188A7000

188AXG1A 13M



1.9 Multijet

188B2000

188AXL1A 18F

188BXL1A 19F

1.9 Multijet HGT

188B2000

188AXL1A 1B



DASHBOARD
AND
CONTROLS
INDEX

(*) Versions with VDC

SAFETY
DEVICES

5-door

CORRECT USE
OF THE CAR

3-door

WARNING
LIGHTS AND
MESSAGES

Bodywork version code

Engine type code

IN AN
EMERGENCY

Versions

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

ENGINE CODES - BODYWORK VERSIONS

269

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

ENGINE
1.28V

1.216V

1.416V

1.816V

1.3 Multijet

1.9 JTD

1.9 Multijet

188A4000

188A5000

843A1000

188A6000

188A9000

188A7000

188B2000

Otto

Otto

Otto

Otto

Diesel

Diesel

Diesel

4 in line

4 in line

4 in line

4 in line

4 in line

4 in line

4 in line

2

4

4

4

4

2

2

SAFETY
DEVICES

GENERAL FEATURES
Engine code

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Cycle
Number and layout of cylinders
Valves per cylinder
Piston bore and stroke

mm

70.8 x 78.86

70.8 x 78.86

72 x 84

82 x 82.7

69.6x 82

82 x 90.4

82 x 90.4

Total displacement

cm3

1242

1242

1368

1747

1248

1910

1910

9.8 : 1

10.6 : 1

11 : 1

10.3 : 1

18 : 1

18.45 : 1

18.0 : 1

kW
HP
rpm

44
60
5000

59
80
5000

70
95
5800

96
130
6300

51
70
4000

63
85
3500

74
100
4000

Nm
kgm
rpm

102
10.4
2500

114
11.6
4000

128
13.0
4500

164
16.7
4300

180
18.3
1750

196
20
1500

260
26.5
1750







Compression ratio
Maximum power (EEC)
corresponding ratio:

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Maximum torque (EEC)
corresponding ratio:
Spark plugs

NGK
NGK
NGK
Fiat BKR6EZ
DCPR7E-N-10 DCPR7E-N-10 DCPR7E-N-10 Fiat RC10YCC
BOSCH
BOSCH
BOSCH
NGK BKR6EZ
YR7DEU
YR7DEU
YR7DEU
Champion
RC10YCC

Fuel

Unleaded
Unleaded
Unleaded
Unleaded
Diesel fuel for Diesel fuel for Diesel fuel for
petrol
petrol
petrol
petrol
motor vehicles motor vehicles motor vehicles
95 RON
95 RON
95 RON
95 RON
(EN590
(EN590
(EN590
(EN228
(EN228
(EN228
(EN228
Specifications) Specifications) Specifications)
Specifications) Specifications) Specifications) Specifications)

270

Downloaded from www.Manualslib.com manuals search engine

1.9 JTD

Electronic Multipoint sequential
phased
integrated electronic injection,
returnless system

Direct injection
with electronically controlled
Multijet “Common Rail”,
turbo and intercooler

Direct injection
with electronically controlled
Unijet “Common Rail”,
turbo and intercooler

DASHBOARD
AND
CONTROLS

1.3 Multijet - 1.9 Multijet

Clutch

Hydraulic control, self-adjusting without travel-free pedal

Drive

Front

Modifications or repairs to the fuel system that are not carried out properly or do not take the
system’s technical specifications into account can cause malfunctions leading to the risk of fire.

IN AN
EMERGENCY

Five forward gears (six on certain versions) and reverse with synchromesh
for forward gear engagement

Gearbox

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

1.28V - 1.216V - 1.416V - 1.816V - 1.3 Multijet - 1.9 JTD - 1.9 Multijet

INDEX

TRANSMISSION

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Fuel feed

1.28V - 1.216V - 1.416V - 1.816V

SAFETY
DEVICES

FUEL FEED/IGNITION

271

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

BRAKES
1.28V - 1.216V - 1.416V - 1.816V - 1.3 Multijet - 1.9 JTD - 1.9 Multijet
Service brakes:
– front
– rear

Disc (self-ventilating on certain versions)
Drum or disc (on certain versions)

Parking brake

Controlled by lever, it works mechanically on the rear brakes

IMPORTANT Water, ice and antifreeze salt on roads may deposit on the brake discs thus reducing braking efficiency at first braking.

SUSPENSIONS
1.28V - 1.216V - 1.416V - 1.816V - 1.3 Multijet - 1.9 JTD - 1.9 Multijet
Front

Mc Pherson independent wheels

Rear

Twisting axle and twisting cross member

STEERING
1.28V - 1.216V - 1.416V - 1.816V - 1.3 Multijet - 1.9 JTD - 1.9 Multijet
Type
Minimum steering
cycle

Rack and pinion, as an alternative
with electric power steering (where provided)
m

272

Downloaded from www.Manualslib.com manuals search engine

10,5

UNDERSTANDING TYRE MARKING
Example: 185/60 R 14 82 H
185 = Nominal width (S, distance between sidewalls in mm).
60 = Percentage height/width ratio (H/ S).
R = Radial tyre.
14 = Rim diameter in inches (Ø).
82 = Load rating.
H = Maximum speed rating.

SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim: 0 ±1 mm.
The values refer to the car in running order.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

SPACE-SAVER SPARE WHEEL
Pressed steel rim. Tubeless tyre.

F0I0034m

INDEX

RIMS AND TYRES
Pressed steel or alloy rims. Tubeless tyres with radial carcass. The
homologated tyres are listed in the Log book.
IMPORTANT In the event of discrepancies between the information
provided on this “Owner handbook” and the “Log book”, consider the
specifications shown in the log book only.
Attaining to the prescribed size, to ensure safety of the car in movement,
it must be fitted with tyres of the same make and type on all wheels.
IMPORTANT Do not use inner tubes with Tubeless tyres.

DASHBOARD
AND
CONTROLS

WHEELS

273

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Load rating
60 = 250 kg
61 = 257 kg
62 = 265 kg
63 = 272 kg
64 = 280 kg
65 = 290 kg
66 = 300 kg
67 = 307 kg
68 = 315 kg
69 = 325 kg
70 = 335 kg
71 = 345 kg
72 = 355 kg
73 = 365 kg
74 = 375 kg
75 = 387 kg
76 = 400 kg
77 = 412 kg
78 = 425 kg
79 = 437 kg
80 = 450 kg
81 = 462 kg
82 = 475 kg
83 = 487 kg

Q = up to 160 km/h.

UNDERSTANDING RIM
MARKING

R = up to 170 km/h.

Example: 5 1/2 J x 14 H2 35

S = up to 180 km/h.

5 1/2 = rim width in inches (1).

T = up to 190 km/h.

J

= rim drop center outline
(side projection where the
tyre bead rests) (2).

15

= rim nominal diameter in
inches (corresponds to
diameter of the tyre to be
mounted) (3 = Ø).

H2

= “hump” shape and number
(relief on the
circumference holding the
Tubeless tyre bead on the
rim).

35

= wheel camber angle
(distance between the
disc/rim supporting plane
and the wheel rim centre
line).

Maximum speed rating
84 = 500 kg
85 = 515 kg
86 = 530 kg
87 = 545 kg
88 = 560 kg
89 = 580 kg
90 = 600 kg
91 = 615 kg
92 = 630 kg
93 = 650 kg
94 = 670 kg
95 = 690 kg
96 = 710 kg
97 = 730 kg
98 = 750 kg
99 = 775 kg
100 = 800 kg
101 = 825 kg
102 = 850 kg
103 = 875 kg
104 = 900 kg
105 = 925 kg
106 = 950 kg

274

Downloaded from www.Manualslib.com manuals search engine

U = up to 200 km/h.
H = up to 210 km/h.
V = up to 240 km/h.
W = up to 270 km/h.
Y = up to 300 km/h.

135/80 B13 82M

165/70 R14 81T
185/60 R14 82H
185/55 R15 82V

165/70 R14 81Q (M+S)
185/60 R14 82Q (M+S)
185/55 R15 82Q (M+S)

4B x 14” ET 43

135/80 B14 84M

5 1/2 Jx14” - 35
1.416V with ESP
6Jx14” ET 35 (Alloy)
1.3 Multijet with ESP
6Jx15” ET 33 (Alloy)

185/60 R14 82H
185/60 R14 82H
185/55 R15 82V

185/60 R14 82Q (M+S)
185/60 R14 82Q (M+S)
185/55 R15 82Q (M+S)

4B x 14” ET 43

135/80 B14 84M

1.416V/1.9JTD
Sporting

6Jx15” ET 33 (Alloy)

185/55 R15 82V

185/55 R15 82Q (M+S)

4B x 14” ET 43

135/80 B14 84M

1.816V HGT
1.9 Multijet HGT

6Jx15” ET 37 (Alloy)

185/55 R15 82V

185/55 R15 82Q (M+S)

4B x 15” ET 35

125/80 R15 95M

1.816V Emotion

6 Jx15” ET 37
6Jx15” ET 37 (Alloy)

185/55 R15 82V
185/55 R15 82V

185/55 R15 82Q (M+S)
185/55 R15 82Q (M+S)

4B x 15” ET 35

125/80 R15 95M

1.9JTD

5 1/2Jx14” ET 35
6Jx14” ET35 (Alloy)
6Jx15” ET33 (Alloy)

185/60 R14 82H
185/60 R14 82H
185/55 R15 82V

185/60 R14 82Q (M+S)
185/60 R14 82Q (M+S)
185/55 R15 82Q (M+S)

4B x 14” ET 43

135/80 B14 84M

1.9 Multijet
Emotion

6Jx15” ET 31,5
6Jx15” ET33 (Alloy)

185/55 R15 82V
185/55 R15 82V

185/55 R15 82Q (M+S)
185/55 R15 82Q (M+S)

4B x 15” ET 35

125/80 R15 95M

1.28V power steering
5 1/2 Jx14” - 35
1.216V 6Jx14” ET 35 (Alloy)
1.4 16V without ESP
6Jx15” ET 33 (Alloy)
1.3 Multijet without
ESP

Refer to the above mentioned table for information on the wheels where snow chains can be fitted.
Follow the prescriptions.

DASHBOARD
AND
CONTROLS

4.5B x 13” ET 35

SAFETY
DEVICES

155/80 R13 79Q (M+S)

5.00B x 13” ET 35

CORRECT USE
OF THE CAR

155/80 R13 79T

1.28V mechanical
steering

WARNING
LIGHTS AND
MESSAGES

SPACE-SAVER SPARE
Rim
Tyre

Snow tyres

IN AN
EMERGENCY

TYRES
Standard

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

RIMS

INDEX

VERSIONS

275

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

COLD TYRE INFLATION PRESSURE (bar)
VERSIONS

STANDARD TYRES
Medium load
Front
Rear

SPACE-SAVER
SPARE WHEEL

Full load
Front

Rear

1.28V
mechanical
steering

155/80 R13 79T

2.0

1.9

2.2

2.1

2.8

1.28V power
steering

165/70 R14 81T
185/60 R14 82H
185/55 R15 82V

2.0

1.9

2.2

2.1

2.8

165/70 R14 81T
185/60 R14 82H

2.0

1.9

2.2

2.1

1.216V - 1.416V

185/55 R15 82V

2.2

2.1

2.4

2.3

1.416V Sporting

185/55 R15 82V

2.2

2.1

2.4

2.3

1.9JTD
Sporting

185/55 R15 82V

2.4

2.1

2.4

2.3

1.3 Multijet

165/70 R14 81T
185/60 R14 82H
185/55 R15 82V

2.2

2.1

2.4

2.3

2.8

1.816V 1.9 Multijet

185/55 R15 82V

2.4

2.1

2.4

2.3

4.2

1.9JTD

185/60 R14 82H
185/55 R15 82V

2.4

2.1

2.4

2.3

2.8

2.8

Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

Size

276

Downloaded from www.Manualslib.com manuals search engine

2.8

DASHBOARD
AND
CONTROLS

DIMENSIONS

SAFETY
DEVICES

Dimensions are expressed in mm and
refer to the vehicle fitted with standard
tyres.
The height refers to the vehicle unladen.

CORRECT USE
OF THE CAR

Boot volume

3-door versions

A

B

C

D

E

F (*)

G

H

I (*)

3840

804

2460

576

1480

1398

1660

1954

1392

INDEX

(*) Track measurements may vary according to rim size.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

F0I0201m

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Unladen boot volume
(V.D.A. standards) ............ 264 dm3

277

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Dimensions are expressed in mm and
refer to the vehicle fitted with standard
tyres.

SAFETY
DEVICES

The height refers to the vehicle unladen.
Boot volume

F0I0200m

SOUND, SPORTING,
HGT versions

A

B

C

D

E

F (*)

G

H

I (*)

3843

800

2460

583

1480

1398

1660

1954

1392

(*) Track measurements may vary according to rim size.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Unladen boot volume
(V.D.A. standards) ............ 264 dm3

278

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Dimensions are expressed in mm and
refer to the vehicle fitted with standard
tyres.

SAFETY
DEVICES

The height refers to the vehicle unladen.
Boot volume

5 doors versions

A

B

C

D

E

F (*)

G

H

I (*)

3865

804

2460

601

1480

1398

1660

1954

1392

INDEX

(*) Track measurements may vary according to rim size.

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

F0I0202m

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

Unladen boot volume
(V.D.A. standards) ............ 297 dm3

279

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS

Top admitted speed after initial car use in km/h.
1.28V

1.216V

1.416V

1.816V

1.3 Multijet

1.9 JTD

1.9 Multijet

155

172

178

205

164

173

185

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

CORRECT USE
OF THE CAR

SAFETY
DEVICES

PERFORMANCE

280

Downloaded from www.Manualslib.com manuals search engine

920
935

960
975

3/5 doors

510

510

510

3/5 doors
3/5 doors
3-door
5-door

750
750
1370
1385

780
750
1430
1445

820
750
1470
1485

Towable loads:
– trailer with brakes:
– trailer without brakes:

3/5 doors
3/5 doors

1000/400(●)
400

1000/400(●)
400

1000/400(●)
400

Maximum load on roof :

3/5 doors

75

75

75

Maximum load on tow hitch
(trailer with brakes):

3/5 doors

60

60

60

Payload (*)
including the driver:
Maximum admitted
loads (**)
– front axle:
– rear axle:
– total:

(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot an/or on the roof so that they comply with these
limits.

INDEX

(●) For specific markets.

DASHBOARD
AND
CONTROLS

860
875

SAFETY
DEVICES

3-door
5-door

Kerb weight
(including all fluids, fuel tank
at 90% and with no optional):

CORRECT USE
OF THE CAR

1.416V

WARNING
LIGHTS AND
MESSAGES

1.216V

IN AN
EMERGENCY

1.28V

Weights (kg)

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

WEIGHTS

281

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

1.816V

1.3 Multijet

1.9 JTD

1.9 Multijet

3-door
5-door

1040
1055

965
980

1040
1055

1075
1090

3/5 doors

510

510

510

510

3/5 doors
3/5 doors
3-door
5-door

850
750
1550
1565

820
750
1475
1490

900
750
1550
1565

900
750
1585
1600

Towable loads:
– trailer with brakes:
– trailer without brakes:

3/5 doors
3/5 doors

1000/400(●)
400

1000/400(●)
400

1000/400(●)
400

1100/400(●)
400

Maximum load on roof :

3/5 doors

75

75

75

75

Maximum load on tow hitch
(trailer with brakes):

3/5 doors

60

60

60

60

Kerb weight
(including all fluids, fuel tank
at 90% and with no optional):
Payload (*)
including the driver:
Maximum admitted
loads (**)
– front axle:
– rear axle:
– total:

(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for arranging the loads in the boot an/or on the roof so that they comply with these
limits.
(●) For specific markets.

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Weights (kg)

282

Downloaded from www.Manualslib.com manuals search engine




47
5-7




47
5-7




Engine cooling
system:

4.2



4.5



4.5



5.8



Engine sump:
Engine sump and filter:

2.5
2.8

2.2
2.5

2.5
2.8

2.2
2.5

2.5
2.8

2.2
2.5

3.7
4.1

3.3
3.65

SELENIA 20K (❒)

Gearbox/differential casing:

1.65

1.5

1.65

1.5

1.65

1.5

1.98

1.8

TUTELA CAR TECHNYX

Front and rear hydraulic
brake circuit:

0.40



0.40











TUTELA TOP 4

Hydraulic brake circuit
with ABS:

0.45



0.45



0.45



0.65



TUTELA TOP 4

Windscreen and
rear window/headlight
washer fluid reservoir:

1.5
(4.5)



1.5
(4.5)



1.5
(4.5)



1.5
(4.5)



Mixture of water and
TUTELA PROFESSIONAL
SC 35

Unleaded Premium petrol
with no less than 95 R.O.N
(EN228 Specifications)
Mixture of distilled water
and PARAFLU UP at 50%

INDEX

(❒) For use with very cold temperatures we recommend using SELENIA PERFORMER MULTIPOWER SAE 5W-30.

DASHBOARD
AND
CONTROLS

47
5-7

SAFETY
DEVICES




CORRECT USE
OF THE CAR

47
5-7

WARNING
LIGHTS AND
MESSAGES

1.416V
kg
litres

IN AN
EMERGENCY

1.216V
litres
kg

Fuel tank:
including a reserve of:

1.816V
litres
kg

Specified fuels
Recommended products

1.28V
litres
kg

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

CAPACITIES

283

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

1.9 JTD
kg
litres

1.9 Multijet
kg
kg

Specified fuels
Recommended products

49
5-7




49
5-7




49
5-7




Diesel fuel for motor vehicles
(EN590 Specifications)

Engine cooling
system:

6.0



6.2



6.2



Mixture of distilled water
and PARAFLU UP at 50%

Engine sump:
Engine sump and filter:

2.85
3.0




4.0
4.3




4.0
4.3




SELENIA WR

Gearbox/differential casing:

1.98

1.8

1.98

1.8

1.98

1.8

Front and rear hydraulic
brake circuit:

0.40



0.40



0.40



TUTELA TOP 4

Hydraulic brake circuit
with ABS:

0.45



0.45



0.65



TUTELA TOP 4

Windscreen and
rear window/headlight
washer fluid reservoir:

1.5
4.5




1.5
4.5




1.5
4.5




Mixture of water and
TUTELA PROFESSIONAL
SC 35

Fuel tank:
including a reserve of:

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

1.3 Multijet
kg
litres

284

Downloaded from www.Manualslib.com manuals search engine

TUTELA CAR TECHNYX

RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Fluid and lubricant specifications
for correct car operation

Recommended
fluids and lubricants

Synthetic-based oil, grade SAE 10W-40 that passes ACEA A3,
API SL specifications

SELENIA 20K

Synthetic-based oil, grade SAE 5W-30 that passes ACEA A1,
ACEA A5, API SL and FIAT 9.55535 specifications

SELENIA
PERFORMER
MULTIPOWER

Synthetic-based oil, grade SAE 5W-40 that passes ACEA B4,
API CF and FIAT 9.55535 specifications

SELENIA WR

Applications

CORRECT USE
OF THE CAR

Use

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

FLUIDS AND LUBRICANTS

Lubricants
for diesel
engines

F0I0028m

INDEX

(❒) For use with very cold temperatures, we recommend using SELENIA PERFORMER MULTIPOWER SAE 5W-30

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

WARNING
LIGHTS AND
MESSAGES

Lubricants
for petrol
engines (❒)

285

Downloaded from www.Manualslib.com manuals search engine

CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Fluid and lubricant specifications
for correct car operation

Recommended fluids
and lubricants

Applications

Synthetic-based oil, grade SAE 75W-85
that passes API GL-4 PLUS, FIAT 9.55550 specifications.

TUTELA CAR
TECHNYX

Mechanical gearbox
and differential

Specific transmission fluid with "ATF DEXTRON III"
type additives.

TUTELA CAR GI/E

Power steering

Grease for high temperatures and low friction coefficient for
differential side homocinetic joints

TUTELA
STAR 700

CV joints on differential
side

Polyurea-based synthetic grease for high temperatures.

TUTELA
STAR 325

CV joints on differential
side, submitted to high
temperatures
(1.416V versions)

Molybdenum disulphide grease high temperature resistant
specific for spherical homocinetic joints (tire and gear side)

TUTELA
ALL STAR

CV joints
on wheel side

Brake liquid

Synthetic fluid FMVSS no. 116 DOT 4, ISO 4925, SAE J-1704,
CUNA NC 956-01

TUTELA TOP 4

Brake and clutch
hydraulic controls

Protective agent
for radiators

Protective with antifreeze action, red colour based on
inhibited monoethylen glycol and organic formula,
that passes CUNA NC 956-16, ASTM D 3306 specifications.

PARAFLU UP (●)

Cooling circuits Proportion: 50% down to -35°
C Not to be mixed
with products having
different formulas.

Additive
for diesel fuel

Additive for diesel fuels with protective action for
Diesel engines

TUTELA
DIESEL ART

To be mixed with the
fuel oil (25 cc per
10 litres)

Windscreen/
rear window/
headlight washer
fluid

Mixture of alcohol and surfactants CUNA NC 956-II

TUTELA
PROFESSIONAL
SC 35

To be used diluted
or undiluted

SAFETY
DEVICES

DASHBOARD
AND
CONTROLS

Use

Lubricants and
greases for
transmission

(●) IMPORTANT Do not add or mix with fluids with specifications other than the specified ones.

286

Downloaded from www.Manualslib.com manuals search engine

The fuel consumption figures given in the table below are determined on the basis of the homologation tests set
down by specific European Directives.



combined consumption: is calculated weighing about 37% of urban cycle consumption and about 63% of
extraurban consumption.

IMPORTANT The type of route, traffic situations, weather conditions, driving style, general conditions of the car,
trim level/equipment/accessories, load, climate control system, roof rack, other situations that affect air drag may
lead to different fuel consumption levels than those measured.
Fuel consumption according to Directive 1999/100/EC
(litres x 100 km)

Urban

Extra-urban

Combined

1.28V

7.3

4.8

5.7

1.216V

7.6

4.8

5.8

1.416V

7.8

5.1

6.1

1.416V Sporting

8.8

5.3

6.6

1.816V

11.5

6.4

8.3

1.3 Multijet

5.6

3.9

4.5

1.9 JTD

6.6

4.0

4.9

1.9 JTD Sporting

7.2

4.2

5.3

1.9 Multijet

7.3

4.1

5.3

WARNING
LIGHTS AND
MESSAGES

extra-urban cycle: frequent accelerating in all gears, simulating extraurban use of the car; the speed varies
between 0 and 120 km/h;

IN AN
EMERGENCY



TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

urban cycle: cold starting followed by driving that simulates urban use of the car;

INDEX



CORRECT USE
OF THE CAR

SAFETY
DEVICES

The procedures below are followed for measuring consumption:

DASHBOARD
AND
CONTROLS

FUEL CONSUMPTION

287

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES

The CO2, emission levels at the exhaust given in the following table refer to combined consumption.
CO2 emissions according to Directive 1999/100/EC (g/km)
Petrol engines
1.28V

1.216V

1.416V

1.416V
Sporting

1.816V

136

138

145

156

197

Diesel engines
1.3 Multijet

1.9JTD

1.9JTD Sporting

1.9 Multijet

119

130

140

140

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

IN AN
EMERGENCY

CO2EMISSIONS

288

Downloaded from www.Manualslib.com manuals search engine

Dashboard and controls ..

4
253
22
277

Car inactivity .............................
Car maintenance .................
– additional checks ...............
– annual inspection plan ......
– scheduled servicing ...........
– service schedule ................
Carrying children safely ..........
Ceiling light ................................
– bulb replacement ...............
Cellular phone set-up ..............
Central door locking system .

283
173
235
239
239
236
237
143
89
222
123
98

68
288
20
91
159
86

Diesel filter ................................
Digital display .............................
Dimensions ................................
Dipped beam headlights
– bulb replacement ............... 217
– control .................................
78
Direction indicators
– bulb replacement ........ 218-220
– control .................................
79
Doors ..........................................
98

DASHBOARD
AND
CONTROLS

Capacities ..................................

71

SAFETY
DEVICES

242
99
94

CORRECT USE
OF THE CAR

Checking fluid levels ................
Child lock ...................................
Cigar lighter ...............................
Climate control system
- automatic two- zone .........
- manual climate control
system ...................................
CO2 emissions. .........................
Control buttons ........................
Controls .....................................
Correct use of the car .......
Cruise Control ..........................

WARNING
LIGHTS AND
MESSAGES

Accessories purchased
by the owner ......................... 125
Additional brake light
– bulb replacement ............... 220
Air bags ....................................... 149
– driver's front air bag ......... 151
– manually deactivating
passenger's front air bag .. 152
– passenger's front air bag .. 151
– side air bags ......................... 153
Air cleaner ................................. 250
Air vents ..................................... 63-64
Ashtray ........................................
94
ASR system ................................ 116
At the filling station .................. 130
Battery
– checking the charge .......... 254
– jump starting ....................... 201
– recharging ........................... 231
– replacing .............................. 255
Bodywork
– maintenance ........................ 262
– version codes ..................... 269

Bonnet ......................................... 107
Boot .......................... 101- 102- 103
– extension ............................. 103
– light ....................................... 223
Brake fluid level ......................... 249
Brake lights
– bulb replacement ............... 219
Brakes
– fluid level ............................. 249
– handbrake ........................... 163
– service and emergency ..... 272
Bulb (replacement) ................... 214

IN AN
EMERGENCY

113

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

ABS system ...............................

INDEX

INDEX

289

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

EBD system.

............................. 113
Electric power steering
(Dualdrive) ............................. 126
Engine
– identification codes ........... 269
– fuel feed ............................... 271
– starting ........................... 160- 161
– technical data ..................... 270
Engine compartment ................ 264
Engine coolant gauge ...............
19
Engine coolant level ................. 247
Engine oil
– checking the level .............. 245
– consumption ....................... 246
– technical specifications ..... 286
Environment (protection) ...... 133
EOBD system ............................ 119
ESP system ................................. 115
Extending the boot.................... 103
External lights ............................
78

Fiat CODE system ...................

11
FIS (fuel inertial cut-off switch) 92
Fix &Go (quick tyre repair kit) 209
Flashing the headlights .............
79
Fluid level checks ...................... 242

290

Downloaded from www.Manualslib.com manuals search engine

Fluids and lubricants..................
Follow me home (device) ........
Front fog lights
– bulb replacement ...............
– control button ...................
Fuel
– consumption .......................
– cut- off switch ....................
– level gauge ...........................
Fuel filler cap .............................
Fuses ............................................

285
80
219
91

199
5-6
18
93
264

Jack
287
92
18
132
221

Gearbox (use) ..........................

164
Glove box ...................................
93

Handbrake

In an emergency ..................
Instrument panel........................
Instruments ................................
Interior equipment ...................
Interiors ......................................

................................ 163
Hazard lights
– control .................................
91
Head restraints .........................
59
Headlight adjustment
(electric adjusting device) ....... 111
Headlight washer
– control .................................
85
Headlights ............................ 111- 112
Heated rear window ...............
91
Identification data .................... 267
Ignition switch ...........................
16

............................................. 204
Jacking the car ........................... 232

Keys ............................................
Load limiter. .............................

13

141
Lubricants (specifications) ...... 285

Main beam headlights
– bulb replacement ...............
– control .................................
– flashing .................................
Multifunction display ................

217
78
79
24

Number plate light
– bulb replacement ...............

Parking .......................................

221

163
Parking sensors ......................... 128
Performance .............................. 280
Plates . .................................... 268-269
Pollen filter ................................. 250
Power windows ........................ 100

Technical specifications ...
Third brake light
– bulb replacement ...............
Tools ...........................................
Towing the car ..........................
Towing trailers ..........................
Transmission ..............................
Transporting children
in safety ...................................
Tyres
– standard ...............................
– understanding tyre marking
– winter tyres ........................

Using the gearbox ...................

266
220
207
233
168
271
142
275
273
171

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR

– warming up the engine ..... 162
Steering ....................................... 272
Steering column lock ...............
17
Steering column stalks ............. 78-81
Steering wheel adjustment .....
60
Sunroof .......................................
96
Sun visors ...................................
95
Suspensions ................................ 272
Symbols .......................................
11

WARNING
LIGHTS AND
MESSAGES

cellular telephones ................. 125
Rain sensor. ...............................
83
Rear fog light
– bulb replacement ............... 220
– control button ...................
91
Rear window washer
– control .................................
85
– fluid level ............................. 248
Rear window wiper
– blade ..................................... 259
– control .................................
85
– nozzle ................................... 261
– smart washing ....................
85
Rearview mirrors ..................... 60-61
Reconfigurable multifunction
display ......................................
28
Rev counter ...............................
18
Reversing light
– bulb replacement ............... 218
Rims ............................................. 274
Roof rack/ ski rack
– fasteners .............................. 109
Rubber tubing ............................ 259

....................... 134
Seats ................................ 56- 57- 58
Seat belts
– general instructions .......... 140
– height adjustment .............. 137
– maintenance ........................ 143
– use ........................................ 135
Side/taillights
– bulb replacement ...... 228-220
– control .................................
78
Smart washing (windscreen) 82- 85
Snow chains ............................... 172
Sound system
– installation ........................... 121
– set-up ................................... 120
– wiring diagram .................... 122
Spark plugs ................................. 270
Starting the engine
– bump starting ..................... 202
– diesel versions .................... 161
– emergency start-up ........... 162
– ignition switch ....................
16
– jump starting ....................... 201
– petrol versions ................... 160
– stopping the engine ........... 162

IN AN
EMERGENCY

Radio transmitters and

Safety devices

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

139
133

INDEX

Pretensioners ............................
Protecting the environment ...

164

291

Downloaded from www.Manualslib.com manuals search engine

DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY

messages ............................... 174
Weights ....................................... 281
Wheel geometry ....................... 273
Wheels
– changing ............................... 202
– spare ..................................... 204
Windows
– cleaning ................................ 264
– side rear ..............................
95
Windscreen/ rear window/
headlight washer fluid level . 248
Windscreen washer
– control .................................
81
– fluid level ............................. 248
Windscreen wiper
– blades ................................... 259
– control .................................
81
– nozzles ................................. 261
– smart washing ....................
82

INDEX

TECHNICAL
CAR
SPECIFICATIONS MAINTENANCE

Warning lights and

292

Downloaded from www.Manualslib.com manuals search engine

PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Fiat has been developing its global commitment towards the safeguarding and protection of the Environment through
the continuous improvement of its production processes and the making of increasingly more “eco friendly” products. With a view to
guaranteeing the best possible service to clients in full observance of environmental standards and in response to the obligations imposed by European Directive 2000/53/EC on end-of-life vehicles, Fiat offers its clients the possibility to hand in their vehicle* at the end
of its life span without additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same incurring
expenses due to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of the countries of the
European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehicles registered from 1 July 2002
on, while, from 2007 on, take-back will be carried out free of charge, independently of the year of registration, provided that the vehicle still contains all its essential component parts (especially engine and body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality service to our customers by de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find out the location of your
nearest authorised treatment facility, offering free of charge take-back, simply contact one of our dealers or refer to the Fiat web site
or call the toll free number 00800 3428 0000.
* Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

NOTES

Downloaded from www.Manualslib.com manuals search engine

VERSIONS

STANDARD TYRE
Size

1.28V with mechanical

Medium load

steering

155/80 R13 79T

1.28V with electrical
power steering

165/70 R14 81T
185/60 R14 82H
185/55 R15 82H
165/70 R14 81T
185/60 R14 82H
185/55 R15 82H
185/55 R15 82H
185/55 R15 82H

1.216V - 1.416V
1.416V Sporting
1.9 JTD Sporting

SPACE–SAVER
SPARE WHEEL

Full load

Front

Rear

Front

Rear

2.0

1.9

2.2

2.1

2.8

2.0

1.9

2.2

2.1

2.8

2.0

1.9

2.2

2.1

2.8

2.2
2.4

2.1
2.1

2.4
2.4

2.3
2.3

2.8

1.3 Multijet

165/70 R14 81T
185/60 R14 82H
185/55 R15 82H

2.2

2.1

2.4

2.3

2.8

1,816V 1.9 Multijet

185/55 R15 82V

2.4

2.1

2.4

2.3

4.2

185/60 R14 82H

2.4

2.1

2.4

2.3

2.8

185/55 R15 82H

2.4

2.1

2.4

2.3

2.8

1.9JTD

ENGINE OIL CHANGE
1.28V - 1.216V - 1.416V
litres
kg

1.816V
litres

kg

1.3 Multijet
litres
kg

1.9JTD - 1.9 Multijet
litres
kg

Engine sump

2.5

2.2

3.7

3.3

2.85

2.5

4.0

3.5

Engine sump and filter

2.8

2.5

4.1

3.65

3.0

2,6

4.3

3.7

FUEL CAPACITIES (litres)
1.28V - 1.216V - 1.416V - 1.816V

1.3 Multijet - 1.9JTD - 1.9 Multijet

47

49

5-7

5-7

Tank capacity
Reserve

Refuel petrol engines with unleaded petrol with an octane rating (RON) no lower than 95 only.
Refuel diesel engines with diesel fuel for motor vehicles (EN590 specifications) only.
Fiat Group Automobiles S.p.A. - Quality - Assistenza Tecnica - Ingegneria Assistenziale
Largo Senatore G. Agnelli. 5 - 10040 Volvera - Torino (Italia)
Print no. 603.45.868 - 03/2007 - 2nd edition

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close