Wael Hassan Cv

Published on February 2017 | Categories: Documents | Downloads: 60 | Comments: 0 | Views: 261
of 6
Download PDF   Embed   Report

Comments

Content

Resume
Personal Information:
Name Company Address Home Address E-Mail Home & Mobile Phones Date of birth Nationality Marital status Religion Languages : Wael Hassan Abd El Rahman. : Scimitar international Production limited (Rally Energy ) 61 El Oroba street Cairo/ Egypt. : Tiba Residence, After the tunel No.C8 Zahraa El Maadi, Cairo - Egypt. : [email protected] : Mobile: 002-010-8090361 : Jan. 1, 1977. : Egyptian. : Married,( have two child) : Muslim. : Arabic: native English: Very good written & spoken.

Career Objective:
A District Engineering position in a multi-national company where I am challenged to provide high quality solutions while continuing to improve my technical skills.

Current Job: District Engineer (Heavy Oil Company) (Team Member– Operations Division)
March 2007 – Present Perform District Engineering duties to effectively manage the production from the heavy oil reservoirs in the Egyptian Eastern desert (API=10-12 ) using PCP and ESP. Work alongside to deliver maximum value from oil producing assets and to enable new-field developments. Also follow up and monitoring all operation engineering and operation work regarding the first steam project in Egypt in Issaran field. Highly skilled at monitoring well performance and relating that to the larger wells performance. Support multi-rig onshore workover program and active well work program.

Job Duties (March 2007 – Present) : Field Work
Witnessing the following onshore rig and rig less job: 1. Matrix Stimulation either by C.T or Pull heading or SST for sandstone and carbonate formation 2. Perforation jobs (TCP & CSG gun) 3. Well logging ‘ (PSP) using Y-tool 4. PLT for high temperature injection wells 5. Supervising running and pulling PCPs string 6. Supervising running and pulling ESPs string 7. Supervising water shut off jobs in heavy oil reservoir using polymer injection

Office Duties
1. Build and update wells data on OFM software for 320 wells 2. Follow up on daily basis the production performance of 200 wells producing under steam cycle stimulation 3. Prepare remedial action plan for the wells and follow up execution 4. Select the perforated intervals for the new drilled wells 5. Review, follow up and interpret the daily production report and put the quick action for production restoring 6. Review the new well log and select the potential interval to be perforated 7. Calculate the productivity of each well and select the best pump size for such wells 8. Design and follow the ESP pump performance for about 6 wells 9. Design and follow the PCP pump performance for about 50 wells 10. Witness the inspection of the ESP which pull out from wells 11. Prepare a evaluation report for different producing layers 12. Create wells evidence file which include all the jobs done in each well through the well life. 13. Recommended the injection pressure for different steam wells and follow steam injection parameters ( P,T & steam quality) 14. Analyze high temperature PLT for steam injection wells and identifying the steam injection profile 15. Perform PLT analysis and recommend the proper action for water isolation job 16. Recommend the water isolation job for the high water cut wells either

mechanically or chemically 17. Perform VLP using Prosper for all the wells and set different sensitivity for future performance 18. Perform material balance calculation using MBAL for predicting the reservoir performance 19. Analyze CBL-VDL , Cast-V,USIT and USIT corrosion mode . 20. Perform PLT analysis and recommend the proper action for water isolation job 21. Follow the beam pump( tubing/ insert) performance for about 100 wells 22. Prepare failure analysis report for PCPs and design the remedy actions 23. Prepare DIFA for ESP pumps and put the action plan to avoid main cause of failure

District Engineer (Team Member– Operations Division)
May 2001 – March 2007 Perform District Engineering duties to effectively manage the production from the reservoirs in the Gulf of Suez. Work alongside join-venture engineers) to deliver maximum value from oil producing assets and to enable new-field developments. Highly skilled at monitoring well performance and relating that to the larger wells performance. Support multi-rig offshore drilling program and active well work program.

Job Duties ( May 2001 –March 2007) : Field Work
• Performing and/or witnessing the following offshore rig and rig less jobs: 1. Matrix Stimulation either by C.T or Pull heading 2. Perforation jobs (TCP & Through Tubing Perforation) 3. Well logging ‘’cased ’’ (PLT, TDT,RST) 4. Well tests (RFT,MDT ,PBU,D.D) 5. Wire line jobs (Tubing Gauging, Run and pull jet pump, Isolation Plugs, Running bridge plug, Open &Close SSD, Run memory gauges). C.T jobs (fishing ,lifting and sand clean out) 6. Snubbing unit in a fishing operation 7. Pulling and running of single & dual completion

Office Duties
1. Design, prepare and review the completion equipment required for oil wells 2. Generate production forecasts for the wells and fields to monitor performance and to update depletion plans for these fields.

3. Identification of production problems such as scale, damage to perforations, choke sizing, etc. 4. Utilizing production data determining remediation plan and implementation of the plan. 5. Supervise ( CDPS )ESP system performance and workover to run and pull the pump 6. Design the proper jet pump size for oil wells 7. Sharing PVT and special core analysis studies (Capillary, normalization& denormalization for relative permeability curves). 8. Waterflood evaluation - pattern performance and the impact on the total field performance including reservoir pressure using I/W & Hall plot technique. 9. Reserve estimation – static and dynamic evaluation of the reservoir to determine remaining reserves, recovery factor and bypassed oil volume with the goal of increasing productivity by drilling new wells, workovers of existing wells (producer and injector) and pattern reconfiguration. 10. Evaluation of reservoir deliverability to enhance the field production performance by utilizing Open Hole Logs , RFT data, and Cased Hole Logs (Production logs, PLT/PSP and Formation evaluation logs, RST and TDT.

Computer Skills:
Technical software Programs: • OFM • Prosper • Mbal • Sub Pump Program • Jet Pump program • Well perform program • General knowledge about Petrel –re Software &Eclipse-simulator Microsoft Word, Excel, PowerPoint

Academic Experience:
(I) Education

Bachelor’s Degree in Petroleum Engineering, Cairo University
Faculty of Engineering, Petroleum Department, in July 1999 Rating of Appreciation: Good (74.8%)

(II) Training 1) Technical training courses:
Course Name PLT interpretation Completion & Workover Gravel pack operation Practical Water flooding Reservoir cases studies. ESP design / application Well Test Analysis Reservoir Management Csg & cementing application PCP design/ application Introduction to Gas processing Advanced well test analysis OFM program Re processing of PVT & Core data for modeling Progressive cavity pump manufacturing/design/ application Introduction to steam injection process Artificial lift optimization (PCP/ESP) Period Location Year

5 days 5 days 5 days 5 days 15 days 5 days 5 days 5 days 5 days 3 Days 5 days 10 days 10 days 6 days 12 days 5 days 7 days

Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Egypt Canda / Edmenton Egypt UK/ Aberdeen

Sep,01 Sep, 02 Mar, 03 April,04 Oct , 04 Feb, 05 Mar,06 April 07 July 07 July 07 Aug 07 Nov 07 Oct. 08 Jan 08 June 08 June 2009 Sep. 2010

2) Non-technical training courses:
Course Name Period Location Company

English Course (upper intermediate level) 3) Diploma in management:

1 Month(oct. 05)

Egypt

leader centre

Mini MBA in (mini master business 6 months ( Aug. 08) administration from Knowledge pass the following courses: Project principal, strategic management, organization behavior, marketing, leadership, business finance.

Egypt

Knowledge Academy

Papers 1-Title: Evaluating Steam Injection Profile with High Temperature Memory PLT
Authors: Mohammed Samir, Wael Hassan, Salah Kamal- Scimitar Production Egypt Ltd., Amr Hassan, Arshad Waheed- Halliburton Energy Services

2-Title: Identify reservoir pathway in fracture heavy oil reservoir
Authors: Mohammed Samir, Wael Hassan, Maher Omara- Scimitar Production Egypt Ltd., Enas Thabet Sameer Joshi- Schlumberger

3-Title: Y-Tool and production logging Tool Application Challenge in Heavy Oil Reservoir Issaran Field – Egypt , Case History
Authors: Mohammed Samir, Wael Hassan, Maher Omara

4- Artificial lift application in heavy oil reservoir Heavy Oil Reservoir Issaran Field – Egypt , Case History
Authors: Mohammed Samir, Wael Hassan,

5- Progressing Cavity Pump Challenges in Issaran Heavy Oil filed: Case Study

Issaran Field, Eastern Desert, Egypt.
Authors :Alaa Shehata, Magdy Shahin, W. Hassaan, H. Aql

Sponsor Documents

Or use your account on DocShare.tips

Hide

Forgot your password?

Or register your new account on DocShare.tips

Hide

Lost your password? Please enter your email address. You will receive a link to create a new password.

Back to log-in

Close